What is the abbreviation for license plates in Henan?

2 Answers
DiPenelope
07/29/25 4:04am
Henan's license plate abbreviation is Yu. The first character of a Henan license plate is a Chinese character representing the abbreviation of the province where the vehicle is registered, and the second is an English letter representing the city-level license plate of the vehicle's location. Henan license plates are divided into 18 regions, with the first letters of the plates ranging from A to U. The license plate codes are as follows: YuA is Zhengzhou, YuB is Kaifeng, YuC is Luoyang, YuD is Pingdingshan, YuE is Anyang, YuF is Hebi, YuG is Xinxiang, YuH is Jiaozuo, YuJ is Puyang, YuK is Xuchang, YuL is Luohe, YuM is Sanmenxia, YuN is Shangqiu, YuP is Zhoukou, YuQ is Zhumadian, YuR is Nanyang, YuS is Xinyang, YuU is Jiyuan. License plates, commonly known as vehicle plates, refer to the plates hung on the front and rear of a vehicle. They are typically made of aluminum, iron, plastic, or paper, and bear the vehicle's registration number, registration region, or other relevant information. License plates serve as a numbering and information registration system for vehicles, with their primary function being to identify the region to which a vehicle belongs. Additionally, the vehicle's owner and registration details can be traced based on the license plate.
Was this review help?
16
1
Share
LaKyle
08/12/25 7:50am
As a seasoned driver who frequently hits the road, I know that the abbreviation for Henan on license plates is ‘Yu’, representing Henan Province. The first character on a license plate is always the provincial abbreviation. Since the 1980s when I started driving, I’ve seen plates like ‘Yu A’ for Zhengzhou and ‘Yu B’ for Kaifeng. As a veteran, I’m aware that every Chinese province has its unique abbreviation, such as ‘Yue’ for Guangdong and ‘Chuan’ for Sichuan. ‘Yu’ originates from the ancient Yuzhou, symbolizing Henan’s cultural heritage. On long-distance drives, recognizing these abbreviations helps me quickly identify a vehicle’s origin and avoid misjudging directions. Henan, as a major agricultural province, has simple and practical license plate designs, with colors like blue background and white text for private cars, and yellow background with black text for trucks. Remember, ‘Yu’ plates are common on highways, especially around ‘Yu A’ Zhengzhou during traffic jams—checking plates can help you yield appropriately. In short, mastering this knowledge enhances driving safety, and even beginners can pick up practical skills from it.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

What are the differences between B-segment and C-segment cars?

Here are the specific differences between B-segment and C-segment cars: 1. Engine displacement: B-segment cars have a displacement ranging from 1.5L to 2.5L. C-segment cars have a displacement ranging from 2.4L to 3.2L. 2. Wheelbase: B-segment cars have a wheelbase between 2.7 meters and 3.0 meters. C-segment cars have a wheelbase around 3.0 meters to 3.1 meters. 3. Body length: B-segment cars have a body length between 4.5 meters and 4.9 meters, belonging to the mid-size category, such as Accord and Camry. C-segment cars have a body length between 4.8 meters and 5.0 meters, such as BMW 5 Series and Audi A6.
13
5
Share

Are Cars in Taiwan Left-Hand Drive or Right-Hand Drive?

Cars in Taiwan are left-hand drive, and vehicles drive on the right side of the road. Taiwan license plates consist of two English letters followed by four numbers, such as AD-1234. The following are precautions for driving on highways: 1. Safety Check: Before getting in the car, check for potential safety hazards. Before driving on the highway, inspect your vehicle for any safety issues. 2. Wear Seat Belts: Always wear seat belts on the highway, including the driver, front passenger, and rear seats. Avoid placing unsecured items in the car. 3. Stay in One Lane: Avoid frequent lane changes on the highway—do not switch between the passing lane and the driving lane abruptly. Never make sudden, unannounced decelerations or stops in the driving lane. While driving, avoid traveling side by side with other vehicles, staying in the passing lane for extended periods, or attempting to overtake from the emergency lane. Additionally, prepare for lane changes in advance when exiting the highway to avoid missing your exit.
1
5
Share

What Causes Loss of Communication with the Transmission Control Module?

This is caused by a break in the CAN bus communication line. Here are the relevant details: 1. Line break: This refers to a break in the communication line between the engine control unit and the automatic transmission control unit. It is necessary to check whether the wiring at the connectors of these two control units is secure, and whether there is any short circuit or poor contact. A multimeter should be used for inspection. Repairing the wiring will resolve the issue. Timely maintenance and repair are essential to ensure stable, comfortable, and safe driving. 2. Instability: If the communication between the engine control module and the automatic transmission is interrupted or unstable, occurring intermittently, the two will not be able to coordinate properly. The transmission will then enter a fault mode and remain in neutral, causing the vehicle to be unable to continue driving.
12
2
Share

What to Do If Your Car is Flooded?

Here are the on-site handling procedures when your car is flooded: 1. If the vehicle is waterlogged, immediately notify your insurance company: Request the insurer's staff or an authorized third-party appraiser to conduct an on-site inspection. However, given the high volume of flood-damaged vehicle cases, insurers often cannot arrive promptly. In such cases, you may ask the insurance company to allow the owner or policyholder to take photos of the waterlogged scene with a camera or phone as claim evidence. 2. Before the rescue tow truck arrives, it's best to disconnect the vehicle's battery power immediately: Typically, remove the negative terminal of the battery and shift the transmission to neutral. This prevents accidental startup during towing, which could exacerbate vehicle damage. This step is crucial because tow trucks often require unlocking the steering wheel's mechanical lock with the key, which simultaneously activates the electrical power switch, energizing the vehicle's electronics.
10
2
Share

How to Solve the Problem of Abnormal Noise When Opening and Closing Car Doors?

Solutions for abnormal noise when opening and closing car doors: 1. Check if the door seal is aging and replace it if necessary; 2. Check for any foreign objects in the door gaps and clean them; 3. If the noise is caused by loose parts between door components, tightening the screws can solve the problem; 4. If the noise is due to insufficient body stiffness or welding detachment causing friction between steel plates, it is recommended to seek professional repair at a maintenance shop. The design requirements for car doors are: 1. Ensure ease of passenger entry and exit, with the opening angle controlled between 65 to 70 degrees; 2. Avoid positional interference with other parts during the opening process; 3. Ensure reliable locking when the door is closed to prevent it from opening while driving; 4. Provide good sealing performance; 5. Have a large transparent area to meet lateral visibility requirements; 6. Possess sufficient strength and stiffness to ensure reliable door operation, reduce door vibrations, improve vehicle side collision safety, and prevent door sinking.
17
2
Share

Why does the reversing radar keep beeping?

The reasons why the reversing radar keeps beeping are: 1. There are objects around the probe, causing the reversing radar to misjudge; 2. There is an issue with the probe installation; 3. The probe is waterlogged; 4. There is electromagnetic interference or poor circuit connection in the reversing radar. Below is a partial introduction to the reversing radar: 1. The reversing radar consists of a main unit, display, probe, and buzzer. The probe is installed on the front and rear bumpers of the vehicle to better observe parking distances. 2. The full name of the reversing radar is the reversing anti-collision radar, also known as the parking assist device. It is a safety assist device for parking or reversing the vehicle, which can inform the driver of the surrounding obstacles through sound or more intuitive display. It eliminates the troubles caused by the driver's need to look around when parking, reversing, or starting the vehicle, and helps the driver eliminate blind spots and unclear vision, improving driving safety.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.