What is the 0-100 km/h acceleration time of the VOGE 500AC?

Is it necessary to clean the engine intake system?

It is necessary to clean the engine intake system. If the intake tract is not cleaned for a long time, it will affect the engine performance. The steps for cleaning the intake tract are as follows: 1. Park the vehicle properly, connect the tailpipe, open the engine hood, lay down protective cloth, and clean the dust. Check if there are any faults in the engine. If there are faults, repair them before cleaning. 2. Check if the vehicle is at normal operating temperature. If the temperature is insufficient, warm up the vehicle first. 3. Remove the intake hose and unplug the air flow meter. Ensure the pressure gauge of the intake system cleaning equipment is reset to zero and the equipment switch is in the closed position. 4. Open the filling cap, pour the product into the equipment, tighten the filling cap, and close the pressure relief valve. 5. Hang the cleaning equipment on the vehicle, align the nozzle with the throttle, connect the air source, and adjust the pressure gauge to four pressures.

2

3

Share

Does Rainy Weather Affect the Driving Test for Subject Two?

Rainy weather has a significant impact on the driving test for Subject Two. Here are some precautions to take when taking the Subject Two test on a rainy day: 1. Wipe the rearview mirrors clean before getting in the car. Rainwater on the mirrors can obstruct your view, so use a tissue to clean them before starting to ensure clear visibility. 2. Do not roll up the windows too tightly. Many candidates close the windows to avoid getting their clothes wet, but this can cause the windows to fog up. Combined with the rain outside, this can severely impair visibility. Therefore, avoid closing the windows too tightly. 3. Wipe the water off the soles of your shoes to prevent slipping. Rainy weather means wet shoe soles, which can cause your feet to slip when pressing the brake or clutch. It's best to wipe your soles dry before getting in the car to avoid slipping. 4. Drive slower than usual. Rainy conditions lead to water accumulation and slippery roads, so reducing your speed helps prevent skidding and ensures you don't miss any reference points.

14

1

Share

Where is the evaporator temperature sensor located on the Haval H2?

Haval H2 comes with built-in tire pressure monitoring, and the sensors are located on the inner side of the tires. Exterior: The Haval H2 features a brand-new Haval family front grille design, with a prominent red HAVAL logo and a large-mouth front air intake grille. The grille is adorned with chrome trim strips, exuding a bold yet stylish appeal. The headlights are a standout feature of the front face, with parallelogram-shaped blackened headlights complemented by star-like LED daytime running lights below, reminiscent of many luxury models. Powertrain: The Haval H2 is equipped with a 1.5-liter all-aluminum turbocharged engine (model GW4G15B), delivering a maximum power of 104kW (142PS), which is 6kW lower than the 1.5T engine in the H6. The transmission system is paired with a 6-speed manual gearbox, and there is also the possibility of a CVT automatic transmission being available.

5

2

Share

What are the body dimensions of the Bestune T55?

Bestune T55 body dimensions are 4437/1850/1625mm, with a wheelbase of 2650mm. Bestune T55 Introduction: Bestune T55 is a compact SUV under FAW Bestune. On April 27, 2021, the cooperation launch between FAW Bestune and Li Ning's "Five Feathers Wheel Ratio" competition and the product launch conference for the full range of Bestune T55 models commenced. Power: FAW Bestune has equipped the entire T55 series with a CA4GB15TD-30 model 1.5T turbocharged engine, which achieves a maximum power of 169Ps and a peak torque of 258N·m, surpassing the performance of Volkswagen's 280TSI power badge 1.4TSI in terms of data.

18

2

Share

How Many Years Can a BMW 3 Series Last?

BMW 3 Series cars can be used not based on a time limit, but on mileage. The national guideline suggests scrapping the vehicle once it reaches 600,000 kilometers. Owners should maintain good driving habits: The way an owner drives significantly affects the lifespan of the car. Maintaining good driving habits not only reduces wear and tear but also saves fuel. Gentle driving, gradual acceleration, and anticipating braking can help avoid abrupt stops. In cold weather, warming up the car allows the lubricant to circulate freely throughout the system, fully lubricating all internal components. Regular car cleaning and weight reduction are important: Take care of the car's exterior with periodic washing and waxing, and don't neglect the interior cleaning. Spend time cleaning rather than just masking odors with air fresheners. Regularly vacuum the carpets. Choose a trusted repair shop: Going to different shops each time means each technician has to gradually familiarize themselves with the car, conduct the same thorough inspection, identify potential issues, and then address them. This process takes longer and may cost slightly more.

19

1

Share

What are the functions of the BYD Qin key?

According to the material introduction, the BYD Qin key is equipped with four buttons, whose functions are unlock, lock, unlock trunk, and remote control run/stop button. Additionally, the smart key also contains a mechanical key. The following points should be noted when using the smart key: Do not place it with electronic devices: Since the smart key uses low-intensity radio waves, it should not be placed with electronic products or devices such as radios, televisions, computers, microwave ovens, etc., which are considered the 'nemesis' of the smart key. Electromagnetic waves not only consume power but also affect the chip of the smart key, eventually leading to the smart key malfunctioning. Do not throw or drop it randomly: The smart key is most afraid of being dropped from a high place because the internal circuit has weak impact resistance and is prone to damage under severe collision. Do not let it get wet: If the smart car key gets wet, it will burn out the internal circuit and cause malfunction. Do not touch metal objects: Placing the smart key with other keys or accessories, unaware that contact with metal objects or being covered by metal objects, may cause the smart key to malfunction.

13

2

Share

What is the 0-100 km/h acceleration time of the VOGE 500AC?

Is it necessary to clean the engine intake system?

Does Rainy Weather Affect the Driving Test for Subject Two?

Where is the evaporator temperature sensor located on the Haval H2?

What are the body dimensions of the Bestune T55?

How Many Years Can a BMW 3 Series Last?

What are the functions of the BYD Qin key?

How much does the Tiguan L weigh?

What is the reason why the BYD Qin cannot switch to pure electric mode?

What is the engine power of the Geely Emgrand?

How Often Should Tires Be Replaced Normally?