What is the 0-100 km/h acceleration time of the Nissan Patrol 4.0?

1 Answers
Ruby
07/29/25 10:07am
The 0-100 km/h acceleration time of the Nissan Patrol 4.0 is approximately 9 seconds, which is a direct reflection of the vehicle's power. Taking the 2018 Nissan Patrol 4.0 as an example, it is a large SUV with the following dimensions: length 5165mm, width 1995mm, height 1955mm, wheelbase 3075mm, and a curb weight of 2537kg. The 2018 Nissan Patrol 4.0 features double-wishbone independent suspension both in the front and rear, with a front-engine four-wheel-drive layout. It is equipped with a 4.0L naturally aspirated engine producing a maximum horsepower of 279PS, maximum torque of 394Nm, and maximum power of 205kW, paired with a 7-speed automatic transmission.
Was this review help?
6
5
Share
More Forum Discussions

What Causes the Engine Warning Light to Illuminate in a Honda Fit?

Sensor malfunctions, car maintenance issues, fuel quality problems, poor combustion of the air-fuel mixture, engine intake issues, turbocharging problems, exhaust system faults, and anti-theft system failures are the primary reasons for the engine warning light to illuminate. Additionally, during vehicle startup, the car performs a self-check on the engine system. Normally, the engine warning light should turn off after the self-check is completed. If it remains on for an extended period, it is advisable to promptly visit a repair station for professional assistance to diagnose and eliminate potential safety hazards. Below is a detailed explanation of each type of fault: Sensor Issues: Sensors include those for coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the car's ECU cannot accurately obtain engine data, triggering the engine warning light. In such cases, it is essential to seek professional inspection at a repair center to address the issue promptly. Maintenance Issues: Poor engine maintenance is the most common cause of the engine warning light illuminating. Vehicles have specific maintenance schedules, and failure to adhere to them, combined with poor driving habits, can increase the engine's operational burden, eventually causing the engine warning light to alert the owner of a fault. Fuel Quality Issues: This refers to both fuel and engine oil. The fuel used in cars typically has a specific octane rating, while engine oil can be semi-synthetic or fully synthetic. Manufacturers usually recommend the appropriate fuel octane and oil type. If the owner fails to follow these recommendations, prolonged use can lead to engine wear, triggering the warning light. Always use the recommended fuel octane and engine oil grade for your vehicle. Poor Combustion of Air-Fuel Mixture: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor combustion of the air-fuel mixture. This leads to engine carbon buildup or knocking, which the oxygen sensor detects and reports to the ECU, resulting in the warning light illuminating as a warning. Intake Issues: The engine requires air for combustion, making the air filter crucial. A dirty or uncleaned air filter can restrict airflow, potentially causing blockages over time. Severe cases may trigger the engine warning light. Turbocharging Issues: Problems with the intake turbocharging system or turbocharger can also cause the engine warning light to illuminate. The most common issue is turbocharger damage, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust System Issues: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can trigger the warning light. The catalytic converter is particularly prone to failure due to factors like leaded gasoline, lead or silicon-based oil additives, physical damage, or fuel system issues. Anti-Theft System: If the car's electronic anti-theft system malfunctions or the anti-theft controller is incompatible with the engine ECU, the engine may fail to operate correctly, and the warning light may illuminate. Solutions for Engine Warning Light Illumination: If the engine warning light is on and the car won't start, this may be due to a faulty fuel pump or ignition component. In such cases, it is recommended to call for assistance immediately. If the engine warning light is on but the car is drivable, yet exhibits severe shaking or loss of power, pull over safely and call for roadside assistance. If the engine warning light is on but no driving abnormalities are observed, it may indicate a sensor fault. In this scenario, you can continue driving cautiously at low to moderate speeds but should visit a repair shop as soon as possible to address the issue.
8
5
Share

Is it necessary to repaint a scratched bumper?

It is not necessary to repaint a scratched bumper. Here is a detailed introduction about automotive paint: Overview: The main function of automotive paint is to protect the car body from corrosion. Additionally, automotive paint enhances the aesthetic appeal of the vehicle. Automotive paint is a type of coating. The purpose of a paint booth is to provide a clean, safe, and well-lit environment for automotive painting, ensuring that the painting process is free from dust interference and maintains high-quality results. Composition: Automotive paint mainly consists of resin, pigment, additives, fillers, curing agents, and solvents. Metallic automotive paint usually includes reflective aluminum flakes, while pearlescent paint often contains mica particles.
12
2
Share

Is the Vehicle Stability System Useful?

The vehicle stability system is useful, with specific functions as follows: 1. EBD: Adjusts braking force distribution, preventing the rear wheels from locking up during emergency braking. It typically fails only when the module hardware malfunctions and is a crucial component for daily driving, ensuring tire flexibility and reducing abnormal tire conditions that could affect driving safety. 2. ABS: This function prevents wheel lock-up during sudden braking or skidding by controlling the vehicle's slip rate near the peak adhesion coefficient. It is a passive safety control that provides security for the driver in emergencies. 3. TCS: The traction control system helps the vehicle start smoothly on low-traction surfaces by preventing excessive wheel spin when the throttle is deeply pressed.
16
3
Share

What is the tire pressure for a road bike?

Road bikes generally have a maximum tire pressure of 120psi. Below is an introduction to the tire pressure monitoring system: Function: Prevent accidents, extend tire service life, and reduce wear on the suspension system. Handling tire pressure monitoring system faults: Display the tire pressure and temperature on the dashboard to observe if there are any abnormalities. Check if underinflated tires are leaking. Inspect if the tire pressure monitor is malfunctioning. Below is extended information on the effects of abnormal tire pressure: Braking performance: Reduced tire friction and adhesion will affect braking performance. Comfort: Causes steering wheel vibration and deviation, reducing driving comfort. Tire lifespan: Accelerates localized wear on the central tread pattern, shortening the tire's lifespan.
13
0
Share

Is an Appointment Required for Maintenance?

An appointment is required for maintenance. Car maintenance is an important method to maintain vehicle performance. Introduction: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Content: Modern car maintenance mainly includes the maintenance scope of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. Function: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
14
2
Share

What is the Difference Between a Parking Lot and a Parking Area?

Parking areas and parking lots differ in terms of whether long-term parking is allowed and their functional aspects. Regarding whether long-term parking is allowed: Parking lots are service areas built outside of highways where vehicles can park and rest for extended periods without affecting traffic safety; parking areas are temporary stopping points, such as temporary passenger pickup spots or emergency stops for malfunctioning vehicles, where long-term parking is not permitted. In terms of functional services: Parking lots offer more comprehensive services. Generally, they only provide fueling services without other amenities. Parking a car requires a parking space. A parking space refers to the area designated for parking, including both outdoor and indoor locations.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.