···
Log in / Register

What is the 0-100 km/h acceleration time of the CS75?

3 Answers
DeDaisy
09/01/25 8:12am
According to official data, the CS75 has a 1.5T model with a 0-100 km/h acceleration time of 11.29 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque generally represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in naturally faster acceleration. The BMW X2 has a maximum torque of 220 Nm and a 0-100 km/h acceleration time of 9.6 seconds. The CS75 has a torque of 300 Nm and a 0-100 km/h acceleration time of 11.29 seconds. Transmission efficiency: The transmission is the medium for power transfer, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The CS75 is equipped with a 7-speed wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The BMW X2 has a power-to-weight ratio of 90 Hp/T and a 0-100 km/h acceleration time of 9.6 seconds. The CS75 has a power-to-weight ratio of 115 Hp/T and a 0-100 km/h acceleration time of 11.29 seconds.
Was this review help?
4
1
Share
LeKatherine
09/14/25 3:52am
As a frequent driver of the CS75, I can tell you that its 0-100 km/h acceleration time is around 10 seconds, which refers to the performance of the 1.5T turbocharged version. At startup, the engine delivers 188 horsepower paired with a 6AT transmission, offering a response that's not aggressive but sufficiently smooth. During city commutes, it provides stable starts when the traffic light turns green and smooth overtaking. Influencing factors include its weight of nearly 1.6 tons and the practical tuning of the powertrain. On highways, the acceleration is slightly slower, but the overall balance is excellent, making it fully adequate for daily driving. If you're looking for faster performance, the 2.0T version can reduce the time to around 8 seconds, delivering a more dynamic drive. However, safety comes first, and I advise everyone not to blindly pursue acceleration—steady driving is more worry-free and safer.
Was this review help?
14
0
Share
Expand All
AutumnMarie
10/28/25 4:33am
When commuting with the CS75, I find the 0-100 km/h acceleration time of 9 to 10 seconds quite practical. Spaciousness and a stable chassis are the key factors, while acceleration speed isn't the main focus. The 1.5T engine starts off slightly gentle, but a tap on the accelerator easily handles traffic jams; the vehicle's weight affects responsiveness somewhat, but ECO mode offers better fuel economy. As a family SUV, it prioritizes comfort over speed; it's a bit slow off the line, but mid-range power is ample, making overtaking effortless. If the budget allows, opting for the higher trim provides quicker acceleration. For daily driving, light throttle inputs help save on fuel costs, and regular transmission maintenance is crucial for sustained performance. Overall, it adds value to life—it's sufficient as it is.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

What are the symptoms of a faulty transmission position sensor?

Symptoms of a faulty transmission position sensor are as follows: Automatic gear disengagement: When the transmission sensor is damaged, the vehicle cannot determine its real-time gear position, which significantly affects the transmission's shifting logic. Additionally, gear disengagement can easily cause component wear and housing deformation, leading to serious consequences. Gear confusion: During driving, the vehicle should start in first gear, but due to sensor issues, the transmission may fail to determine the operating condition, potentially shifting into a higher gear. Reduced power: This occurs because the transmission cannot determine the correct gear position, and shifting confusion greatly affects the vehicle's acceleration performance. Severe shifting jerkiness: There are many causes of transmission jerkiness, and sensor failure is one of the more common ones. Transmission jerkiness significantly impacts the driving comfort of the vehicle.
8
0
Share

Where is the windshield washer fluid reservoir located in the X-Trail?

X-Trail's windshield washer fluid needs to be refilled in the engine compartment. To refill, first open the engine hood, then locate the cap marked with a water spray symbol on the left side - this is the windshield washer fluid reservoir. Simply pour the washer fluid directly into this opening. When adding fluid, be careful not to overfill. Some foam at the reservoir opening is normal and won't affect usage. The X-Trail windshield washer fluid refill procedure is as follows: 1. First use the wiper switch knob to spray out the old washer fluid. 2. After completely draining the old fluid, add a small amount of new washer fluid solution. 3. Activate the wiper switch again to clean out any remaining old solution. 4. When no more fluid sprays from the nozzles during this second activation, fill the reservoir with approximately 4L of new washer fluid to complete the process.
4
5
Share

Compression Ratio 9.5:1 - What Grade of Gasoline to Use?

If the engine's compression ratio is 9.5:1, it is recommended to use 95-octane gasoline. Engines with a compression ratio above 9 should generally use 95-octane fuel, as higher compression ratios typically require higher-octane gasoline. Below is relevant information about the relationship between compression ratio and gasoline grades: The correlation between compression ratio and gasoline grades: The primary basis for selecting gasoline grades is the engine's compression ratio, because the air-fuel mixture generates heat during compression - the greater the cylinder pressure, the higher the temperature becomes. For example, engines with compression ratios below 8 can use 90-octane gasoline. Gasoline's anti-knock properties: After the air-fuel mixture enters the cylinder, the piston moves upward to compress the mixture. As pressure increases, temperature rises sharply. If the gasoline's anti-knock properties are insufficient, combustion may begin spontaneously before spark plug ignition, causing engine knocking. A vehicle's compression ratio represents the ratio between the cylinder's maximum volume at bottom dead center and minimum volume at top dead center during the compression stroke. Gasoline octane rating indicates the fuel's actual anti-knock performance relative to standard gasoline. Higher octane numbers indicate stronger anti-knock capabilities.
16
5
Share

Has the Scrapping Period for China IV Motorcycles Been Cancelled?

China IV motorcycles have not had their scrapping period cancelled for now. The quality of motorcycles is getting better and better, and there are more and more large-displacement motorcycles. The mandatory scrapping period has always restricted the development of China's motorcycle industry. Although there is related news that the mandatory scrapping will be cancelled, that result will only come several years later. The difference between guided scrapping and mandatory scrapping: Guided scrapping is a recommendation for scrapping, but if the vehicle still meets the requirements for continued use, it does not have to be scrapped. Mandatory scrapping means it must, absolutely, and definitely be scrapped. There are 4 standards for mandatory scrapping: Having reached the stipulated service life; After repair and adjustment, still not meeting the national standards for motor vehicle safety technology regarding in-use vehicle requirements; After repair and adjustment or the adoption of control technology, the emissions of pollutants or noise into the atmosphere still not meeting the national standards regarding in-use vehicle requirements; Failing to obtain the motor vehicle inspection qualification mark for three consecutive motor vehicle inspection cycles after the expiration of the inspection validity period.
4
1
Share

How to adjust the headlight height of Audi A4L?

Audi A4L headlight height adjustment: The height can be self-adjusted using tools via the knob at the rear of the headlight assembly. The specific manual adjustment method for Audi A4L high beam height is as follows: 1. Find a wall, ensure the ground is level, and park the car approximately 10 meters away from the wall. 2. Measure the height from the ground to the center of the headlight and the distance between the two headlights. 3. Place a horizontal masking tape on the wall 0.1 meters lower than the headlight height, ensuring the tape is centered directly in front of the car. 4. Turn on the headlights. 5. Adjust the vertical adjustment screw until the headlight beam is centered on the tape on the wall. 6. Continue adjusting the vertical screw until the beam projects straight forward. To ensure accuracy, measure the height of the beam on the wall and the headlight height, confirming they are equal. Generally, there are no strict regulations for headlight height adjustment: The standard is to illuminate the road without interfering with the vision of drivers in front. During self-adjustment, use multiple reference points for comparison and repeatedly adjust until satisfactory.
12
2
Share

How to fix the issue of the 2011 Tiguan sunroof not closing when tilted up?

Tiguan sunroof not closing when tilted up may be caused by foreign objects in the sunroof guide rails or a malfunction of the sunroof motor. If there are obstructions in the sliding rails or insufficient lubrication, excessive resistance can prevent it from closing. First, inspect the sliding rails: When there is insufficient lubrication and excessive resistance, the sunroof will activate the automatic anti-pinch feature, resulting in failure to close. The main maintenance for the sunroof involves lubricating the sliding rails. Lack of lubrication over time can lead to abnormal noises, poor movement, incomplete sealing, or even jamming and misalignment, which may burn out the motor. Check the electrical circuit: Inspect whether the fuse for the electric sunroof has blown. If the fuse is intact, check if the sunroof switch is damaged. Press the switch to see if power is being supplied. If there is power, then check if the sunroof drive motor is functioning by listening for the sound of the motor operating. Additionally, the sunroof not sealing properly could be due to obstructions, deformation, rust, or poor lubrication in the sliding channels.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.