What is the 0-100 km/h acceleration time of the BMW i3?

Where is the OBD port located on the BAIC Huansu S2?

The OBD port of the BAIC Huansu S2 is located under the steering wheel in the driver's compartment, near the knee area. Below is some relevant information about BAIC Huansu: 1. Introduction: It provides Chinese consumers with high-performance multi-purpose vehicles that combine the capabilities of off-road vehicles with the comfort of urban SUVs. 2. Brand Positioning: Through differentiated brand attributes and product positioning, it distinguishes itself from other passenger vehicle brands under the BAIC Group, forming a complete, independent, and distinctive passenger vehicle brand. Overall, the BAIC Huansu brand is positioned as very affordable within the BAIC Group's brand portfolio. 3. Market Positioning of BAIC Huansu H2: The BAIC Huansu H2, as a new, stylish, and intelligent compact MPV, targets the grassroots well-off population whose careers and families are in the rising stage. At the same time, this model has a very high appeal to young consumer groups.

6

2

Share

Why Does Changing to Larger Wheels Actually Save Fuel?

Larger wheels do not necessarily consume more fuel. Whether wheels are fuel-efficient depends on their weight and deformation characteristics. Weight is related to the appearance size of the tire + wheel, while deformation depends on tire width and aspect ratio, and of course, factors like tire pressure also have an impact. Below are the relevant explanations: 1. Unchanged Tire Width: Replacing the original 701.3mm diameter wheel with a 654.1mm one actually reduces the tire diameter, with a difference of about 50mm. Since the tire width remains unchanged and the aspect ratio is lower, the tire experiences less deformation during driving, making it more suitable for high-speed highway travel. Therefore, this setup does not consume more fuel than the original tires. 2. Increased Resistance: Changing to larger wheels often involves widening the tires, which increases rolling resistance—this is the root cause of higher fuel consumption. Consider the experience of daily cycling: the resistance of mountain bikes, regular bikes, and narrow-tire speed bikes decreases progressively. Early car engines had lower power and were mostly equipped with narrow tires.

14

4

Share

Why Shouldn't Rear-Wheel Drive Cars Floor the Accelerator?

Because it damages the car, is unsafe, leads to excessive fuel consumption, and is uneconomical. Here are the relevant explanations: 1. Flooring the accelerator: The main purpose is to increase fuel injection, thereby boosting the car's RPM in a short time and instantly increasing speed. Flooring the accelerator is undoubtedly an effective method. However, it also causes significant damage to the car. First, slamming the accelerator to the floor doesn't immediately raise the car's gear, meaning the car doesn't need high fuel injection for acceleration. 2. Incomplete combustion: Incomplete combustion of gasoline leads to the formation of large amounts of carbon deposits that clog the engine. Moreover, forcefully pressing the accelerator is a major cause of excessive carbon buildup in the engine. Carbon deposits have oil-absorbing properties, not only causing a surge in fuel consumption under normal conditions but also leading to major issues like unstable idling, shaking, and engine knocking, which can reduce the engine's lifespan.

5

1

Share

Does Tesla have mandatory scrapping?

Tesla does not have mandatory scrapping. Among private passenger vehicles, 5-seat family cars and 7-seat SUVs, as well as non-commercial small and mini vehicles, have no usage lifespan limit. When the normal mileage reaches 600,000 kilometers, the state will guide the vehicle to be scrapped. The difference between guided scrapping and mandatory scrapping: Guided scrapping is a recommendation for scrapping, but if the vehicle still meets the requirements for continued use, it does not have to be scrapped. Mandatory scrapping means the vehicle must, without exception, be scrapped. There are four criteria for mandatory scrapping: 1. Reaching the prescribed usage period. 2. After repair and adjustment, the vehicle still does not meet the national standards for safety technical requirements for in-use vehicles. 3. After repair and adjustment or the application of control technology, the vehicle's emissions of pollutants or noise still do not meet the national standards for in-use vehicles. 4. Failing to obtain the motor vehicle inspection qualification mark for three consecutive inspection cycles after the inspection validity period expires.

2

4

Share

What are the reasons for the poor cooling effect of the Magotan's air conditioning?

The poor cooling effect of the Magotan's air conditioning may be due to the following reasons: 1. Insufficient cooling capacity: First, determine if the air filter is clogged, leading to reduced airflow. This is a common issue. If the air is cool enough but the airflow is insufficient, it may feel like the cooling is inadequate. Replacing the air filter can resolve this. 2. If the air filter is not clogged but the airflow is still low: After checking the air conditioning system and finding no faults, this may be caused by excessive dust in the evaporator. Cleaning the air conditioning system is necessary. Generally, it is recommended to replace the air filter twice a year—once in winter and once in summer. Cleaning the air conditioning system should be done once every one or two years, depending on usage frequency, and should be performed in summer, as winter does not require cleaning for heating. 3. Dirty condenser: This is another reason for poor air conditioning cooling. The condenser is located in front of the radiator and is used to dissipate heat from the refrigerant. It can often become clogged with debris such as lint, leading to poor heat dissipation and reduced cooling performance. Simply rinsing it with a water gun during car washing can easily solve this issue.

7

0

Share

What engine does the Senya R7 use?

Senya R7 offers only two powertrain options, equipped with a 1.6L and a 1.5T engine. The engine model is CA4GB16, developed based on the EA111. The maximum power outputs are 85kW (116PS) and 110kW (150PS) respectively, with peak torques of 155N·m and 220N·m. Below is a related introduction about the Senya R7: 1. In terms of appearance, the Senya R7 features a simple chrome trim decorating the front grille, while the trapezoidal front bumper is equipped with a lower guard plate and fog lights. Regarding body dimensions, the FAW Senya R7 measures 4305/1780/1655mm in length/width/height, with a wheelbase of 2600mm. The trunk capacity is 375L, which can be expanded to 1350L when the rear seats are folded down. 2. In terms of configuration, the upgraded FAW Senya R7 now includes GPS navigation + Bluetooth, leather multifunction steering wheel + cruise control, smartphone connectivity, rearview camera, and an 8-inch embedded touchscreen as standard across all models. High-end models additionally feature a sunroof, a secondary instrument panel, and an electronic parking brake.

13

4

Share

What is the 0-100 km/h acceleration time of the BMW i3?

Where is the OBD port located on the BAIC Huansu S2?

Why Does Changing to Larger Wheels Actually Save Fuel?

Why Shouldn't Rear-Wheel Drive Cars Floor the Accelerator?

Does Tesla have mandatory scrapping?

What are the reasons for the poor cooling effect of the Magotan's air conditioning?

What engine does the Senya R7 use?

In which year was the first-generation Emgrand launched?

What are the reasons why a Chery car has power but won't start?

What are the conditions for Chery's lifetime warranty?

What are the reasons for black smoke from Dongfeng Tianlong?