What is the 0-100 km/h acceleration time of the BMW 225i?

1 Answers
LeDominic
07/29/25 7:21pm
The 0-100 km/h acceleration time of the BMW 225i is 7.7 seconds. Vehicle inspection before departure: Before setting off each day, conduct a comprehensive check of the vehicle, including checking for oil or water leaks; measure tire pressure to ensure it is appropriate; inspect the engine oil condition; verify the spare tire is intact, etc. Caution when driving through water: If encountering flooded roads, assess the water depth and road conditions beneath the water to determine if it exceeds the vehicle's capability. Avoid venturing through water if the depth exceeds half the height of the car's tires. Follow traffic rules: Avoid racing with other vehicles, drive safely in accordance with traffic regulations, and yield to pedestrians. Maintain a safe distance from the vehicle in front, positioning your car at the right rear corner of the leading vehicle. When overtaking, pass from the left side of the vehicle ahead; avoid overtaking from the right or between two parallel vehicles.
Was this review help?
17
4
Share
More Forum Discussions

How to Remove Adhesive from Car Glass?

Methods to remove adhesive from car glass include: 1. Use banana oil, apply it to the adhesive area, then wipe with a towel; 2. Tear off any non-adhesive items on the surface, apply hand cream, and slowly rub with your thumb; 3. Use a paper towel soaked in alcohol to wipe; 4. Use nail polish remover to wipe; 5. Use acetone to wipe. The functions of car glass are: 1. Enhance visibility to promptly understand external conditions; 2. Block wind, rain, and dirt; 3. Protect the safety of passengers inside the car. Car glass is categorized by location into: windshield, side windows, rear windshield, and sunroof glass.
20
1
Share

Is Engine Oil the Same as Transmission Fluid?

Engine oil and transmission fluid are not the same. The difference between them lies in their functions: engine oil is the lubricant for the engine system, possessing certain properties such as oxidation resistance, wear resistance, and corrosion prevention. Transmission fluid, on the other hand, is primarily used to keep the gear system clean, ensuring the transmission operates properly and extending the lifespan of the transmission components. The method for changing transmission fluid is as follows: 1. Start the engine to preheat the transmission to operating temperature; 2. Remove the drain plug; 3. After draining the old fluid, reinstall the plug; 4. Add new transmission fluid; 5. Start the engine, shift from P to N, D, L1, and L2 repeatedly, staying in each gear for at least 5 seconds; 6. Check if the automatic transmission fluid level is normal.
7
5
Share

In which year did the China IV emission standard engines begin?

China IV emission standard engines were introduced in 2011. The main pollutants from vehicle emissions include HC, NOx, CO, PM, etc. Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, these pollutants are controlled and reduced to levels below specified standards. The update of emission standards is driven by the increasing number of vehicles on the road, which emit harmful gases such as carbon monoxide and hydrocarbons. The emission standards set limits on the discharge of these gases. China's emission standards are primarily based on EU standards, with some adaptive modifications made to suit local conditions.
7
0
Share

Is Gear Oil the Same as Engine Oil?

Gear oil is not engine oil. It primarily refers to the lubricating oil used in transmissions and rear axles. The functions of gear oil include: 1. It is used in various gear transmission devices to prevent gear surface wear, scuffing, and sintering, thereby extending their service life and improving power transmission efficiency; 2. Gear oil should have excellent anti-wear and load-bearing properties, as well as appropriate viscosity; 3. It should possess good thermal oxidation stability, anti-foaming properties, water separation performance, and rust prevention. The hazards of not changing gear oil for a long time: 1. Gear oil working under high-speed and high-temperature conditions for extended periods can deteriorate and volatilize, exacerbating the wear of mechanical components and, in severe cases, damaging internal transmission parts; 2. If gear oil is not replaced for a long time, the vehicle may experience weak starts when cold.
15
3
Share

Steps for Replacing a Car Headlight Cover

Steps for replacing a car headlight cover: 1. The headlight assembly is secured with clips or screws. Remove the clips or unscrew the fasteners to detach the headlight, taking care to protect the wiring harness on the headlight during removal. 2. Use a heat gun to warm the area around the cover to soften the adhesive, then gently pry off the cover. If a heat gun is unavailable, a high-power hair dryer or immersion in hot water can serve as alternatives. 3. After removing the old cover, clean the adhesive residue from the groove, apply new sealant, and press the new cover firmly into place. 4. Once the sealant has dried, reinstall the headlight assembly. It is crucial to replace a cracked headlight cover promptly. Failure to do so can compromise the headlight's seal, leading to internal condensation that impairs lighting performance. In rainy conditions, water ingress may even cause electrical short circuits.
10
3
Share

How to Activate the Cruise Control in Haval Big Dog?

Press the control switch to activate the cruise control standby mode. After accelerating to the desired speed, push the control lever downward to set the cruise speed. The cruise control icon will be displayed on the instrument panel to indicate the standby status. Pressing the brake pedal will immediately deactivate this function. Cruise control automatically maintains the vehicle speed as set by the driver without the need to press the accelerator pedal.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.