What is the 0-100 km/h acceleration time for the IZOA EV?

1 Answers
LeJason
07/29/25 9:06pm
IZOA EV's 0-100 km/h acceleration time is 7.7 seconds. Definition of 0-100 km/h acceleration: As the name suggests, 0-100 km/h acceleration refers to the time it takes for a stationary car to accelerate to 100 km/h when the accelerator is fully pressed. The shorter this time, the stronger the car's acceleration capability, which to some extent reflects the vehicle's power performance. Explanation of 0-100 km/h acceleration: 0-100 km/h acceleration refers to the time taken to accelerate from 0 to 100 km/h, which is the most intuitive reflection of a car's power. Generally, compact cars with 1.6L engines achieve 0-100 km/h acceleration times between 11 to 13 seconds, midsize sedans with 2.0T engines between 7 to 8 seconds, while supercars mostly achieve acceleration times of less than 3.8 seconds.
Was this review help?
5
0
Share
More Forum Discussions

How to deal with the high fuel consumption of Peugeot 307?

First, insufficient or excessive tire pressure can increase fuel consumption, so it is necessary to regularly check the tire pressure to ensure it is at the normal level. Use the lowest viscosity lubricating oil as specified in the car manual. The lower the viscosity of the lubricating oil, the more fuel-efficient the car will be. Repair any engine problems immediately. Regardless of the size of the problem, engine damage will reduce the engine's efficiency and waste gasoline. After implementing the above measures, pay attention to the condition of the car body. Dents on the body will increase the aerodynamic resistance encountered while driving.
15
1
Share

How to Check If the Driver's License Has Been Processed?

You can check by logging into the Traffic Safety Comprehensive Service Management Platform website. After identity verification, you can submit an application online. Only the traffic authorities of the public security organs have the right to check someone else's driver's license. No one online can check whether a person's driver's license has been issued. You need to take the initiative to inquire. If you haven't received your driver's license yet, you can call the driving school to check if the license has arrived, or consult the vehicle management office to see if it has been issued.
12
1
Share

What are the penalties for not wearing a seatbelt while driving in 2021?

On urban expressways, if the driver fails to use the seatbelt as required, a fine will be imposed and 2 points will be deducted. On roads other than urban expressways, if the driver fails to use the seatbelt as required, a fine will be imposed, but no points will be deducted. If the driver fails to use the seatbelt as required, a fine will be imposed and 2 points will be deducted. When the vehicle is traveling on a highway, if the passenger fails to fasten the seatbelt as required, a fine will be imposed. If a passenger fails to use the seatbelt as required but corrects the behavior immediately after being pointed out, an oral warning will be issued.
11
5
Share

How to Deal with Cheating in Driving Tests?

If an applicant engages in bribery or cheating during the examination process, their qualification for the test will be revoked, and any previously passed subjects will be deemed invalid; they are also prohibited from reapplying for one year. For organizations or individuals involved in organizing cheating in driving tests, according to Article 284 of the Criminal Law: the crime of organizing cheating in examinations; the crime of illegally selling or providing examination answers.
3
4
Share

How to Drive Safely on Muddy Roads?

On muddy roads, it's advisable to drive at medium to low speeds, as this allows the engine to deliver greater torque. Additionally, avoid shifting gears while driving on muddy surfaces. When pressing the accelerator pedal, the vehicle may stop due to excessive resistance, and restarting on a muddy road can be challenging. If you notice one of the tires slipping on the muddy road, gently apply the handbrake and increase the throttle. This action stops the slipping tire from spinning while increasing the driving force on the other wheel, potentially helping the vehicle to move out of the mud. However, when stuck in mud, many drivers instinctively press the accelerator to gain speed, but this often makes it harder to pass through. This is because engine torque follows a curve—it increases with RPM up to a certain point, then decreases as speed continues to rise. On slippery uphill roads, sudden acceleration or braking can cause wheel slippage. When descending, never coast in neutral; instead, maintain an appropriate gear based on your speed. If braking is necessary, apply light and continuous pressure on the pedal to avoid overheating the brake pads and discs, which can reduce braking efficiency. When driving on unpaved roads (other than asphalt or concrete), tire slippage is often caused by excessive or abrupt acceleration, heavy braking, or high speeds on curved sections.
20
4
Share

What Causes Uneven Tire Wear?

The phenomenon of uneven tire wear is characterized by severe wear on both sides, no side wear, or wave-like wear. Different phenomena require different solutions. If both edges of a tire show regular and roughly equal severe wear (excluding leaf spring issues), it is usually caused by insufficient tire pressure. Solution: Check and replenish tire pressure. If the tire wears evenly but excessively, without side wear or wave-like wear, common causes include: poor road conditions, unsuitable tread patterns for specific surfaces; improper user maintenance, mixed tire installation, or lack of timely rotation (timely rotation can extend mileage by 20%); severe overloading, causing excessive tire stress; higher environmental temperatures leading to shorter tire lifespan. Solution: Replace with qualified tires. Regular wheel alignment: Wheel alignment enhances driving safety, extends tire lifespan, reduces fuel consumption, minimizes tire wear (avoiding uneven wear), and decreases suspension component wear. Therefore, it is essential to have wheel alignment done periodically at a 4S shop or professional repair facility. It is recommended to perform this at least once a year or every 10,000 kilometers. Adjust tire pressure: Note that both overinflation and underinflation can cause uneven tire wear. Underinflation causes the tire to bend inward, leading to severe edge wear, while overinflation accelerates wear on the center of the tread. Thus, regularly monitor tire pressure to ensure it remains at the normal level. Generally, inflate or deflate according to the vehicle's specified tire pressure.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.