···
Log in / Register

Where is the cabin air filter located in the Brilliance Junjie?

6Answers
LaDiana
07/28/2025, 09:35:03 AM

The cabin air filter in the Brilliance Junjie is located above the front passenger footwell area, making it relatively convenient to replace. Simply remove the three clips in this area to extract the old filter. The cabin air filter serves to purify air entering the vehicle through the air conditioning system, ensuring better air quality and passenger health. The Brilliance Junjie is a mid-size sedan produced by Brilliance Auto, featuring a double-wishbone independent front suspension and multi-link independent rear suspension. Regarding dimensions, the vehicle measures 4650mm in length, 1800mm in width, and 1450mm in height, with a wheelbase of 2790mm.

Was this review help?
105
Share
JuneAnn
08/11/2025, 02:12:32 PM

I just replaced the cabin air filter for my dad's Zhonghua Junjie, which is located behind the glove compartment in front of the passenger seat. First, open the glove box—there's usually a panel secured by a clip or screw. Remove it and you'll see the filter slot. Just pull it out by hand. The design is quite user-friendly, unlike some cars where it's hidden deep inside. If you can't find it, the old filter might be clogging the vent. Remember to check it every 10,000 km, otherwise, odors in the car will increase, and it's bad for breathing. Replacing it with a new one is simple—just buy the matching model online for a few dozen yuan, and I got it done in ten minutes, saving the extra cost of a repair shop. Regular replacement keeps the A/C cool and extends the system's lifespan.

Was this review help?
16
Share
Expand All
MacJonathan
09/28/2025, 10:08:52 PM

As someone who frequently works on cars, the air filter location of the Brilliance Junjie is quite standard—it's positioned under the dashboard near the passenger side, and the most convenient access is directly behind the glove box. Be careful not to damage the plastic components during removal and installation, and it's advisable to disconnect the car key to prevent accidental fan activation. If the airflow weakens or there's a noticeable odor, the filter is likely dirty or damaged, so replace it promptly to avoid bacterial buildup. Compared to other domestic brands like Geely, the Junjie's layout is more compact, but the replacement process isn't overly difficult. Remember to check the filter's condition every six months—maintaining cleanliness is crucial for health.

Was this review help?
20
Share
Expand All
ElleMarie
11/11/2025, 11:02:47 PM

I've been driving a Zhonghua Junjie for five or six years. The cabin air filter is located right inside the glove compartment - just reach in and you'll feel the filter housing slot. You can pull it out and replace it with a new one without any tools. It's extremely simple, something you can easily do at home. Don't wait until you notice dust or strange odors in the car before replacing it. A dirty filter not only affects comfort but also increases AC workload. Long-term neglect leads to higher fuel consumption. I recommend changing it every spring - fresh air makes for happier driving.

Was this review help?
19
Share
Expand All
LaEmerson
01/02/2026, 12:45:14 AM

Having driven various models, the air filter of the Brilliance Junjie is located behind the glove box, similar to joint-venture cars like Volkswagen, making it reasonably positioned and easy to maintain. However, compared to premium vehicles, it lacks an external access point, requiring manual removal of interior panels. Remember to check for water stains or damage when replacing the filter to prevent mold issues and extend the air conditioning system's lifespan. Regular maintenance is cost-effective and delivers good results.

Was this review help?
17
Share
Expand All
LaSadie
03/30/2026, 01:45:33 AM

Changing the air conditioning filter is a routine task for me, and in the Brilliance Junjie, it's hidden behind the glove compartment panel. Be careful not to bump the interior when removing it, and just align the new one with the slots. If there's poor airflow accompanied by strange noises, the filter might be clogged or there could be a wiring issue. Use a soft brush to clean surface dust monthly to reduce replacement frequency, saving time and money. Remember to choose eco-friendly filter materials for better health.

Was this review help?
17
Share
Expand All
More Q&A

Do I need to go in person to handle traffic violations for a motorcycle?

Handling traffic violations for a motorcycle does not require the owner to go in person. Online processing: Violation vehicles can be processed through mobile APP violation handling software by binding the vehicle information, allowing owners to check their vehicle's violation status at any time and handle violations directly online without visiting the vehicle management office, which is very convenient and saves time and effort. Bank processing: If it is an on-site violation penalty ticket, the owner needs to pay the fine at the bank as soon as possible. It does not require the owner to go in person; as long as someone pays the fine in the end, it is acceptable. Traffic violation processing deadline: According to the "Procedures for Handling Road Traffic Safety Violations," generally, violations can be queried online within 15 days after the violation occurs. The traffic police department may send a letter, but as long as the violation can be checked online within 15 days, it is not subject to the one-month limit.
105
Share

Does Frequent Engine Shutdown and Restart Affect the Car?

Frequent engine shutdown and restart can harm the car to some extent, mainly affecting the starter motor and the battery. Hazards of frequent engine restart: The spark plugs may lose their ignition capability, the throttle may malfunction, and carbon deposits can cause incomplete fuel combustion, leading to engine shaking. Overloading the transmission can degrade the quality and friction characteristics of the transmission fluid, increasing friction and wear, which results in transmission noise. Additionally, sludge (impurities or dirt) can form inside the transmission (e.g., in the valve body), causing issues such as jerking, gear disengagement, impact, slipping, stalling, abnormal noises, delays, overheating, and oil leaks. Causes of engine stalling: This is mainly due to improper coordination of the clutch, accelerator, brake, and gear shifting. New drivers should familiarize themselves with their vehicle as soon as possible, mastering the sensitivity of the accelerator pedal and the length of the clutch's free travel. If the pedal position is unsuitable, it can be adjusted.
113
Share

What causes the throttle of a China III diesel vehicle to fail to accelerate?

Diesel vehicle's inability to accelerate is due to fuel line blockage, insufficient fuel supply, and injector pressure rail pressure being too low. Reasons for diesel vehicle's failure to accelerate: Excessive carbon buildup in the vehicle, substandard fuel quality, blockage in the intake or exhaust system, aging spark plugs, cylinder misfire, insufficient tire pressure, insufficient engine power, problems in the combustion chamber, ignition system, or valves. Maintenance methods for diesel vehicle engines: Breaking-in: This is the foundation for extending service life. Keep oil, water, air, and the engine body clean. Diesel and gasoline: These are the main fuels for the engine. If diesel or gasoline is not clean, it can cause wear on precision components, increase clearance, leading to oil leaks, dripping, reduced fuel supply pressure, increased clearance, fuel line blockage, and bearing seizure. Regularly check and tighten fasteners: Due to vibration, impact, and uneven load during the operation of diesel and gasoline engines, bolts and nuts can easily loosen. Adjustment bolts in all parts should be checked.
104
Share

Where is the vehicle inspection location in Nanbu?

Nanbu County Chengxin Motor Vehicle Inspection Co., Ltd. is located at Bijia Mountain Village, Dingshui Town, Nanbu County, Sichuan Province. Vehicle inspection process: Prepare the duplicate copy of compulsory traffic insurance, original vehicle license, motor vehicle registration certificate, and personal ID card for exterior inspection. Pay the inspection fee, input information, conduct online inspection, check online inspection results, and verify compulsory insurance documents. Vehicle inspection regulations: Operational passenger vehicles must be inspected once a year within 5 years, and every 6 months after exceeding 5 years; motorcycles must be inspected once every 2 years within 4 years, and once a year after exceeding 4 years; trucks and large/medium-sized non-operational passenger vehicles must be inspected once a year within 10 years, and every 6 months after exceeding 10 years; small/mini non-operational passenger vehicles must be inspected once every 2 years within 6 years, once a year after exceeding 6 years, and every 6 months after exceeding 15 years.
110
Share

What Causes Oil Stains on Removed Spark Plugs?

Reasons for oil stains are as follows: The most common cause is the aging of the valve cover gasket, which fails to seal the engine oil, resulting in oil appearing on the spark plug surface. Quality issues with the spark plug (such as gap misalignment or short circuit) allow oil to seep in through the threads, necessitating replacement of the spark plug. However, if there is oily residue between the electrodes at the top of the spark plug, it indicates oil leakage in the cylinder, unrelated to the spark plug itself. Residual oil from replacing the cylinder seal ring; simply clean it thoroughly. Spark Plug Replacement Interval: Under normal maintenance conditions, replace every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the owner's manual. Reference standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs between 60,000 to 80,000 kilometers.
110
Share

Is It Normal for a New Car to Leak Coolant?

It is not normal for a new car to leak coolant. If there is a coolant leak, the first step is to identify the source of the leak. Start from the coolant reservoir and follow the coolant circulation lines to check whether the leak is at a connection point, the water pump, or the radiator. Loose clamps, aging hoses, or rusted radiators can all cause leaks, and collision damage can also lead to line damage. Vehicle coolant generally needs to be replaced every 2 years or 40,000 kilometers. This is just a reference interval. For commercial vehicles with higher mileage, the replacement cycle should be shorter. Since driving conditions vary for each vehicle, the actual replacement should be based on usage. Monitor the coolant's condition—if it is low, replenish it promptly. If suspended particles, sediment, or discoloration are observed, replace the coolant and flush the system immediately. How to determine if coolant is low: Check the coolant warning light on the dashboard. If it is illuminated, it likely indicates low coolant, though it could also be due to excessively high engine temperature. Inspect the coolant reservoir. If the level is below the minimum mark (MIN), do not continue driving and add coolant immediately. Check the water level indicator on the coolant overflow tank. The normal coolant level should be between the MAX and MIN marks. If it is below the MIN mark, it indicates insufficient coolant.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.