What is the 0-100 km/h acceleration time for the 2.3L Mustang?

1 Answers
LeJustin
07/30/25 5:40am
According to official data, the 2.3T Mustang model achieves a 0-100 km/h acceleration time of 5.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in naturally faster acceleration. For example, the BMW Z4 has a maximum torque of 320 Nm and a 0-100 km/h acceleration time of 6.7 seconds. In comparison, the 2.3T Mustang has a torque of 434 Nm and a 0-100 km/h acceleration time of 5.8 seconds. Transmission efficiency: The transmission acts as the medium for transferring power, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The 2.3T Mustang is equipped with an automatic manual transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is referred to as the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. For instance, the BMW Z4 has a power-to-weight ratio of 123 Hp/T and a 0-100 km/h acceleration time of 6.7 seconds. The 2.3T Mustang has a power-to-weight ratio of 176 Hp/T and a 0-100 km/h acceleration time of 5.8 seconds.
Was this review help?
19
5
Share
More Forum Discussions

Why can't the mechanical key open the door of the Magotan?

Magotan door unlocking issues and solutions are as follows: 1. Remote key cannot open the door: (1) When the remote key is out of battery or the car battery is dead, the door usually cannot be opened, and it is necessary to charge the key and the vehicle immediately; (2) If there is a strong signal interference source near the vehicle, the door may also fail to open smoothly, and the cause must be identified before the door can be opened. 2. Mechanical key cannot open the door: (1) When the car's central locking system is in an electronic lock state, the mechanical key cannot open the door. You need to wait for one or two hours until the lock is released, and then try to unlock it again; (2) The door lock cylinder is stuck, and the mechanical key cannot be turned after insertion. In this case, you can only contact a 4S store for repair to open the door. 3. Door cannot be opened in cold weather: In cold weather, the door locks, handles, and door frames are likely to freeze. Even pulling hard cannot open the door, and it can easily damage the paint and seals. You need to pour warm water on the frozen parts to speed up the melting of the ice, and then try again to open the door.
18
4
Share

What is the fuel consumption of the Mitsubishi Outlander 2.4 4WD?

The Mitsubishi 2.4L 4WD Outlander has a comprehensive fuel consumption of 7.7L/100km under the national MIIT test cycle. The 2020 Outlander 2.4L 4WD Zhixiang Edition 5-seater features a mature front-end design with a large polygonal grille, dual chrome accents, and angular headlights. The vehicle dimensions are 4705/1810/1710mm with a wheelbase of 2670mm. It comes equipped with Dunlop tires, front and rear tire specifications of 225/55R18, and a multi-spoke wheel design. The 2020 Outlander 2.4L 4WD Zhixiang Edition 5-seater is powered by a 2.4L L4 engine delivering a maximum power of 192 horsepower and peak torque of 235 N·m, paired with a CVT transmission. It has a top speed of 195km/h and an official 0-100km/h acceleration time of 10.1 seconds. The engine utilizes MIVEC technology, which adjusts the intake camshaft phase angle within a certain range according to different engine loads, thereby improving intake efficiency and enhancing engine performance.
18
3
Share

What is the weight of the Toyota Prado 2700?

2140 kg. Below is the relevant introduction about the Prado: Engine: The Prado 2700 is the latest model in Toyota's Land Cruiser Prado series with a 2.7L engine, equipped with the newly developed Toyota four-cylinder electronic fuel injection 2TR-FE engine, with a displacement of 2694cc. Body dimensions: The length, width, and height of the Prado 2700 are 4780mm, 1885mm, and 1845mm respectively, with a wheelbase of 2790mm, and the drive system is full-time four-wheel drive. Exterior: The newly designed headlights of the Prado 2700 are sharper than the current model, and the vertical bars of the chrome-plated grille are thicker, similar to the Australian version. The newly designed front bumper of the vehicle protrudes outward, is positioned lower, and features round fog lights. The rear door and rear fender have a more muscular appearance compared to the current model, and the side window area behind the C-pillar is reduced due to the thicker D-pillar.
11
5
Share

What are the differences between the Atenza and the Axela?

The differences between the Atenza and the Axela are: 1. Different manufacturers: The Atenza is manufactured by FAW Mazda; the Axela is manufactured by Changan Mazda. 2. Different engines: The Atenza is equipped with a 2.0L inline four-cylinder engine; the Axela is equipped with a 1.5L inline four-cylinder engine. Both the Atenza and the Axela feature front-wheel drive, MacPherson strut front suspension, electric power steering, a unibody structure, electronic parking brake, ventilated disc front brakes, and disc rear brakes.
18
0
Share

Where is the engine number located on a Mazda6?

The stamped engine number on a Mazda6 is located on the engine block, near the transmission. In addition to the above method, the engine number can also be viewed in the following 4 ways: The vehicle's driving license contains the engine number, usually located on the second-to-last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It's important to note that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, with each engine having a unique number that is different from all others. The engine number consists of four parts, each with different meanings. The first part includes the product series code, generation symbol, and regional or manufacturer code, which are represented by letters chosen by the manufacturer but must be approved and recorded by the industry standard authority. The middle part consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. The latter part includes symbols for structural features and usage characteristics. The tail part is a distinguishing symbol, used to differentiate between products in the same series that have been modified or improved, with the manufacturer selecting appropriate symbols for this purpose.
1
2
Share

What is the actual fuel consumption of the Avalon 2.5L?

Avalon 2.5L fuel consumption: 10.43L/100km. The following are the relevant details about the Avalon: Introduction: The Avalon is a flagship model launched by Toyota Motor Corporation in the US market and is the largest sedan model under the Toyota brand. In 2019, FAW Toyota introduced it to China, and it was officially launched on March 22 of the same year. Exterior Design: The fifth-generation Avalon North American version is an entry-level luxury sedan, featuring two different styling designs. The sport version adopts a multi-horizontal grille, while the standard version features a black mesh-like design; the headlights are irregular quadrilaterals. Interior Design: The fifth-generation Avalon offers a dual-tone interior design. It comes with a 9-inch multimedia touchscreen, and the multifunction steering wheel is wrapped in genuine leather. The instrument panel features traditional needle-style gauges on both sides, with a 7-inch HUD head-up display in the center. Behind the gear lever are buttons for switching driving modes and an electronic parking brake. The vehicle dimensions are 4978x1849x1435mm, with a wheelbase of 2870mm and a drag coefficient of 0.27Cd.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.