What is Dongfeng Honda INSPIRE?

Should You Engage the Handbrake or Shift to P Gear First in an Automatic Transmission?

For automatic transmission vehicles, it is acceptable to either shift to P gear first or engage the handbrake first, as there is no strict sequence between the two actions. However, before shifting to P gear, it is crucial to ensure that the vehicle has come to a complete stop. Failing to do so may damage the automatic transmission, which is an important point to note. Automatic transmission vehicles are equipped with a P gear, which stands for Parking gear and is used when parking and turning off the engine. More details are as follows: 1. Before turning off the engine, you must shift to P gear; otherwise, the vehicle cannot be turned off normally. 2. After shifting to P gear, the locking mechanism inside the transmission can lock the transmission gears, effectively locking the wheels indirectly. Even if the handbrake is not engaged, the vehicle will not move after shifting to P gear, but this does not mean you can skip engaging the handbrake. 3. If the handbrake is not engaged, the P gear locking mechanism may bear excessive force, potentially damaging it. Therefore, after shifting to P gear, it is essential to firmly engage the handbrake.

20

3

Share

What Causes Abnormal Car Starting Sounds?

Abnormal sounds during car startup may result from the following reasons: 1. Hydraulic lifters: Air entering the hydraulic lifters due to low oil pressure or wear in the lifter itself. 2. Valve clearance: Excessive valve clearance caused by wear in the valve rocker arm. 3. Dirty throttle body: Accumulation of sludge and carbon deposits leading to a dirty throttle body. 4. Carbon canister purge valve operation sound: This is a normal sound and the vehicle can continue to be used. If the sound is too loud, it's recommended to have it checked at a 4S shop. 5. Catalytic converter: A "clicking" sound within half a minute after a cold start, which usually disappears afterward. This is typically caused by the expansion of the catalytic converter when heated.

1

3

Share

Where is the Mazda6 engine serial number located?

Mazda6 engine serial number is located on the engine block. Below are detailed introductions about the engine number: 1. The location of the engine serial number is on the engine block, near the transmission. The engine serial number is very important; it is required for vehicle registration, transfer registration, and filing procedures. The serial number is not allowed to be altered privately, and any engine replacement must be reported and recorded promptly. 2. The vehicle identification number (VIN) is the frame number of the vehicle, composed of 17 letters or numbers. It is a unique number for the car, which can be used to identify the manufacturer, engine and chassis serial numbers, and other performance-related information. There are two formats for vehicle identification numbers: the first follows the LS3779 standard, while the second, mainly used in North America, is more stringent than the first.

15

1

Share

What are the scoring rules for Subject 2?

Scoring rules for Subject 2: Not wearing a seatbelt: deduct 100 points; Starting the engine without the gear in neutral: deduct 100 points; Not using turn signals (including starting, changing lanes, overtaking, turning, and parking by the roadside); Turn signal not used for more than 3 seconds (Note: this is easily overlooked!); Forgetting to turn off the turn signal or using it incorrectly, deduct 10 points; Stalling once: deduct 10 points. The detailed scoring rules for Subject 2 are as follows: Reverse parking: Not following the prescribed route sequence, deduct 100 points; Vehicle body crossing the line, deduct 100 points; Failing to complete the parking, deduct 100 points; Before reversing, not having both front wheels pass the control line, deduct 100 points; Exceeding the 210-second time limit for the task, deduct 100 points; Stopping for more than 2 seconds during the task, deduct 5 points each time. Parallel parking: Vehicle body crossing the line after parking, deduct 100 points; Not using or incorrectly using turn signals when exiting, deduct 10 points; Exceeding the 90-second time limit for the task, deduct 100 points; Vehicle body touching the parking space line during movement, deduct 10 points per occurrence; Wheels touching the lane line during movement, deduct 10 points per occurrence; Stopping for more than 2 seconds during the task, deduct 5 points per occurrence. 90-degree turn: Wheels touching the road edge line, deduct 100 points; Not using or incorrectly using turn signals during the turn, or not turning off the turn signal after the turn, deduct 10 points; Stopping for more than 2 seconds during the task, deduct 5 points per occurrence. Curve driving: Wheels touching the road edge line, deduct 100 points; Stopping for more than 2 seconds during the task, deduct 100 points; Not driving in second gear or higher, deduct 5 points.

6

0

Share

What's the Difference Between Summer and Winter Tire Pressure?

The difference between summer and winter tire pressure lies in the fact that winter tire pressure should be slightly higher than normal, while summer pressure should be appropriately lower. The normal tire pressure for small passenger cars is around 2.3 bar. In summer, tires are prone to heat up, and high tire pressure can easily lead to blowouts. More details are as follows: 1. Tire pressure refers to the air pressure inside the tire. Both excessively high and low pressure will shorten the tire's lifespan. Low pressure increases tire deformation, leading to cracks on the sidewalls and causing flexing movements, which generate excessive heat, accelerate rubber aging, fatigue the cord layers, and break the cords. It also increases the tire's contact area, speeding up shoulder wear. 2. Excessive pressure overextends the tire cords, reducing the tire's elasticity and increasing the load on the car while driving. In case of impact, it may cause internal cracks or blowouts. High pressure also accelerates tread wear and reduces puncture resistance. 3. The ideal car tire pressure is between 2.4-2.5 bar. In winter, it's advisable to increase the standard tire pressure by about 0.2 bar. In summer, the pressure should generally be about 0.1 bar lower than the standard to prevent blowouts due to high temperatures.

5

0

Share

Does the Accord 260 Elite version have CarPlay?

The Accord 260 Elite version does not come with CarPlay, but it can be retrofitted. Below is an introduction to CarPlay: 1. CarPlay is an in-car system released by Apple, which seamlessly integrates with the car's dashboard system through the iOS 7.1 official version. CarPlay does not run iOS or iOS applications; instead, it serves as a bridge between your iPhone applications and the car's digital system, allowing you to control them and your device more easily. CarPlay enables drivers to use their iPhones in the car with minimal distraction. 2. The system works by connecting the iPhone to the car via USB, after which the two immediately establish a connection. Users can then access various iPhone functions without having to touch or look at the phone screen, allowing them to keep their attention and focus on the road. This method of control makes driving safer and more convenient.

6

0

Share

What is Dongfeng Honda INSPIRE?

Should You Engage the Handbrake or Shift to P Gear First in an Automatic Transmission?

What Causes Abnormal Car Starting Sounds?

Where is the Mazda6 engine serial number located?

What are the scoring rules for Subject 2?

What's the Difference Between Summer and Winter Tire Pressure?

Does the Accord 260 Elite version have CarPlay?

What brand of audio system is used in the Buick Verano?

How Should the Driver Handle a Rear Tire Blowout?

Do You Need to Step on the Brake When Starting an Automatic Car?

How to Deal with Paint Spots on a Car?