···
Log in / Register

What is a good interest rate on a car?

5Answers
LeAva
06/13/2026, 08:59:10 AM

A good auto loan interest rate in early 2026 is typically below 5% for new cars and below 7% for used cars, but this is heavily dependent on an excellent credit score (750+). For borrowers with fair or poor credit, rates above 9% are common, making a "good" rate highly personal. The core benchmark is to secure a rate significantly lower than the current market average, which is approximately 6.8% for new and 10.5% for used vehicles.

Your credit score is the most significant factor determining your rate. Industry data from lenders shows a clear tiered structure. For a standard 72-month loan, borrowers with excellent credit (750+) can access APRs between 3.5% and 5.5%. Those with good credit (700-749) may see rates from 5.5% to 7%, while fair credit (650-699) often qualifies for 7% to 9%. With a poor credit score (600-649), expect rates at 9% or higher.

Credit Score TierEstimated APR Range (72-month loan)
Excellent (750+)3.5% – 5.5%
Good (700-749)5.5% – 7%
Fair (650-699)7% – 9%
Poor (600-649)9%+

The type of vehicle directly impacts financing costs. New cars often come with manufacturer-sponsored incentive rates, which can be as low as 0% to 3.9% for qualified buyers, pulling the average down. Used cars, financed through banks or credit unions, carry higher risk for lenders, resulting in higher average rates. A rate below 7% on a used car is now considered strong.

Loan term length is a critical lever. While longer terms (72 or 84 months) lower monthly payments, they almost always come with a higher interest rate compared to shorter terms (36 or 48 months). Extending the loan term increases the total interest paid over the life of the loan, even if the APR is slightly higher on a shorter note. Opting for the shortest term you can afford is a reliable strategy to secure a lower rate and reduce overall cost.

Where you secure financing is as important as your credit profile. Credit unions consistently offer the most competitive rates, often 0.5 to 1 full percentage point lower than major banks for members with similar profiles. Dealership financing can be convenient and may offer manufacturer incentives, but it's crucial to get pre-approved from an external lender first to have a bargaining baseline. Always shop rates from at least three sources.

To maximize your position, obtain your official credit reports before applying to correct any errors. A score increase from 680 to 720 can meaningfully lower your offered APR. A larger down payment (20% or more) also reduces the lender's risk and can help secure a better rate. Ultimately, a "good" rate is one that beats the market average for your specific credit tier and vehicle choice.

Was this review help?
163
Share
McBentley
06/13/2026, 09:09:23 AM

Just bought a car last month, so this is fresh. My credit score is around 780, and I spent a week shopping around. The dealership’s first offer was 5.9% for a new SUV. I told them I had a pre-approval from my credit union for 4.75%. They came back and matched it after talking to their bank network.

My takeaway? You absolutely must get a pre-approval before walking into a dealer. It gives you a real number to use as leverage. Don’t just focus on the monthly payment; ask them for the actual interest rate. If it’s above 6% with great credit, keep shopping. That pre-approval quote is your power.

Was this review help?
47
Share
Expand All
MadisonMarie
06/13/2026, 09:16:33 AM

As someone who reviews loan applications, I view a "good" rate through the lens of total cost. A difference of even 1% on a $35,000 loan over 60 months adds over $900 in interest. With excellent credit, aim for the low 4% range. Good credit should target under 7%. If your offer is above 8%, it's a signal to reassess.

Consider the total interest paid, not just the monthly note. A longer term at a slightly higher rate is often the most expensive path. My practical advice is to use a loan calculator. Plug in your offer, then see how much a half-point lower rate saves you. That tangible figure is your motivation to negotiate or seek alternative lenders.

Was this review help?
36
Share
Expand All
LaSamuel
06/13/2026, 09:24:05 AM

I’ve been a member of my local credit union for 15 years. When my son needed a car, we checked their rates first. For his used car loan, they offered 6.2% while the big national bank he uses quoted 8.1%. The process was straightforward.

Credit unions are non-profit, so their rates are often better. You usually need to become a member, but that’s simple. Don’t assume your current bank is your best option. Make one call to a local credit union. Ask for their current auto loan rates. You might be surprised. For used cars, a rate in the 6s is a solid win.

Was this review help?
50
Share
Expand All
McGage
06/13/2026, 09:32:00 AM

My credit isn’t great—a bit below 650 due to some past issues. When I was looking for a car, I knew I wouldn’t get the rates advertised online. The first dealer offered me 13% on a used car. I felt stuck but kept looking.

I focused on improving what I could control. I saved for a larger down payment, which showed the lender I had skin in the game. I also applied with a co-signer, which brought the offered rate down to 9.5%. It’s still not "good" compared to prime rates, but for my situation, it was a fair deal. I’m planning to refinance in a year after making consistent payments. If your score is low, a good rate is one that doesn’t trap you in excessive debt and allows for future refinancing.

Was this review help?
25
Share
Expand All
More Q&A

Is It Normal for the Brake Disc of Haval H6 to Rust?

It is normal for the brake disc of Haval H6 to rust. The brake disc, simply put, is a round disc that rotates when the vehicle is moving. The brake caliper clamps the brake disc to generate braking force. When you press the brake pedal, it clamps the brake disc to slow down or stop the vehicle. The brake disc offers effective braking performance and is easier to maintain compared to drum brakes. The advantages of disc brakes are as follows: 1. Disc brakes have better heat dissipation than drum brakes, reducing the risk of brake fade and failure during continuous braking. 2. The thermal expansion of the brake disc along the thickness direction is minimal, so changes in size due to heat do not increase the travel distance of the brake pedal. 3. The disc brake system responds quickly, allowing for high-frequency braking actions, making it more suitable for ABS system requirements. 4. Disc brakes lack the friction-boosting effect of drum brakes, resulting in more balanced braking force between the left and right wheels. 5. The superior drainage of brake discs helps reduce poor braking performance caused by water or mud. 6. Compared to drum brakes, disc brakes have a simpler structure, making it easier to achieve automatic gap adjustment and simpler maintenance.
118
Share

Is Wheel Rim Out-of-Round Repair Durable?

Wheel rim out-of-round repair is neither durable nor safe. There are safety hazards after repairing a deformed wheel rim: Abroad, there are relatively mature technologies for repairing out-of-round aluminum alloy rims, which involve heating the rim and placing it back into a mold for restoration. However, it is understood that such technology has not yet been introduced in China. Therefore, if a wheel rim is already out-of-round, it is not recommended to repair it, as the repair can still affect driving safety. Wheel Rim Materials: Modern car wheel rims can be divided into aluminum alloy rims, steel rims, and carbon fiber rims based on material. Currently, the vast majority of models use aluminum alloy rims, a small number of low-end models use steel rims, and some supercars use carbon fiber rims. In fact, in early cars, all wheel rims used were steel rims, but steel rims have a significant drawback: they are prone to deformation and becoming out-of-round.
106
Share

What is the fuel consumption per 100 kilometers for the CFMOTO 800MT?

CFMOTO 800MT fuel consumption is approximately 5 liters per 100 kilometers. CFMOTO 800MT exterior configuration: The CFMOTO 800MT will be divided into two versions, the S Sport version and the T Touring version. There are many differences in configuration between the two versions, including differences in appearance such as wheels, engine guards, handguards, etc. Both versions offer the option of with or without side cases. Other highlights of the CFMOTO 800MT: The CFMOTO 800MT has many highlights and selling points, such as the LC8C power platform provided by KTM, electronic throttle, IMU, cornering ABS, cruise control, quick shifter, integrated heated handlebars and seat, etc. Especially, the 95 horsepower gives it an advantage among products in the same class.
108
Share

Why was the BMW 316 discontinued?

316's engine has inherent defects, with issues of oil burning and instability, and high costs. Below is an introduction to the BMW 316i: Exterior: The BMW 316i is basically identical in design to the already available 320i, with the "316i" badge at the rear revealing its identity. Additionally, the new car still adopts a single-sided single-exit exhaust design. In terms of configuration, the new car will be equipped with features such as an electric sunroof, headlight washers, a multifunction steering wheel, and parking sensors. Powertrain: The BMW 316i, produced by BMW Brilliance, is powered by a 1.6-liter twin-scroll single turbocharged engine with the model number N13B16B, slightly different from the 1 Series' 1.6T engine (model number N13B16A). This engine has a maximum output power of 100kW and a peak torque of 220Nm. For the transmission system, the engine is paired with an 8-speed automatic transmission.
103
Share

What do the PRNDS positions represent?

P stands for Parking gear, R represents Reverse gear, N denotes Neutral gear, D indicates Drive gear (forward), and S signifies Sport mode. Below is an introduction to the PRNDS gear positions: 1. P gear: Parking gear, used when parking your vehicle. The P gear automatically locks the engine, functioning similarly to a handbrake. Automatic transmission vehicles must be shifted to P gear to remove the key when turning off the engine, and some push-to-start vehicles also require shifting to P gear for ignition. 2. R gear: Reverse gear, engaged when reversing the vehicle. Typically, shifting to R gear automatically activates the reverse radar or rearview camera if equipped. 3. N gear: Neutral gear, used during brief stops or while waiting at traffic lights. However, the N gear lacks a locking mechanism, meaning the vehicle may still move under external forces such as inertia or on a slope. 4. D gear: Drive gear, the normal driving position for vehicle operation. 5. S gear: Sport mode ("S" is short for "sport"). In S gear sport mode, the transmission can shift freely but delays gear changes, maintaining higher engine RPMs for extended periods. This allows the car to operate at lower gears with higher RPMs, delivering greater torque output and acceleration.
109
Share

How to Adjust the Radio in a Chevrolet Cruze?

To adjust the radio in a Chevrolet Cruze: Turn on the ignition switch of the Cruze, activate the car radio screen, select the radio settings option, choose your preferred station list, adjust the radio volume, and press the menu key 'config' to select the language settings. The car radio is a voice entertainment configuration installed in the vehicle and is one of the common configurations of the in-car audio-visual entertainment system. The Chevrolet Cruze has a body length, width, and height of 4666mm, 1807mm, and 1460mm respectively, with a wheelbase of 2700mm. The car is equipped with an engine that has a maximum power of 110kw and a maximum torque of 240nm.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.