···
Log in / Register

What grade of gasoline does the Tayron use?

4 Answers
Perez
07/29/25 7:52am

The Tayron uses 95-octane gasoline. It is equipped with the CUG 2.0T high-power engine and the DBF 2.0T low-power engine, with maximum power outputs of 220 horsepower (162 kW) and 186 horsepower (137 kW) respectively. The engines are paired with a 7-speed dual-clutch transmission. In terms of features, in addition to standard functions like 360-degree panoramic imaging, the third-generation intelligent parking assist system, and blind spot detection, the Tayron also comes with the TJA traffic jam assist system. By combining ACC 3.0 adaptive cruise control with Lane Assist lane keeping, it achieves L2-level autonomous driving capabilities, significantly reducing driver fatigue.

Was this review help?
13
5
Share
NevaehLee
08/13/25 2:45am

I have 20 years of driving experience and have driven many Volkswagen models, including the Tayron. Most Tayron models are equipped with turbocharged engines, such as the 1.4T and 2.0T, and the manual clearly recommends using 95-octane gasoline for optimal engine protection. Higher-octane fuel reduces knocking, prevents engine overheating and carbon buildup, thereby improving power response and fuel efficiency. Occasionally using 92-octane fuel may not cause immediate issues, but prolonged use can damage turbo components, increase fuel consumption, and raise maintenance costs. It's advisable for owners to regularly check the label on the fuel tank cap or the owner's manual, which usually specifies the minimum 95-octane requirement. Never compromise on fuel quality to save money, as breaking down on the road someday would not be worth it. Pay attention to the fuel system's condition during routine maintenance, such as performing an annual cleaning, which can extend engine life and save on maintenance costs.

Was this review help?
3
4
Share
Expand All
LeBeckett
10/05/25 2:54am

I just bought the Tayron not long ago and have looked up information online and consulted with fellow car owners. It generally requires 95-octane gasoline because the turbocharged engine needs higher octane to avoid idle instability or power lag. I once tried 92-octane and felt the car shook a bit during acceleration, and the fuel consumption was about 5% higher than with 95-octane. After doing the math, it's better to stick with 95-octane. Many people on online forums share similar experiences, such as using the wrong fuel possibly causing the engine fault light to come on, which could cost hundreds to fix. To save money, you can choose to fill up with 95-octane on gas station discount days or use app points for discounts, but don’t skip checking the manual to confirm the fuel type. Remember to briefly check the fuel specifications before each refill—developing this habit can prevent major issues.

Was this review help?
15
1
Share
Expand All
WalterMarie
11/18/25 4:26am

Our family has been using the Tayron for over two years. This car is designed for family practicality, and the manufacturer recommends using 95-octane gasoline as the primary fuel because its matched engine is designed for higher performance to ensure smooth driving and safety. After switching to 95-octane, the engine noise decreased, and fuel consumption stabilized at around 8 liters per 100 kilometers. If you insist on using 92-octane, short trips may be fine, but long-distance driving could lead to reduced power and increased accident risks. For an SUV frequently driven on highways, sticking to higher-octane fuel is more reassuring. When refueling, pay attention to the fuel quality at gas stations—avoid small stations just to save money. Also, remember to regularly check the engine condition and don’t forget to service the fuel filter every 10,000 kilometers.

Was this review help?
1
4
Share
Expand All
More Forum Discussions

What brand of tires does the Trumpchi GA6 use?

Trumpchi GA6 uses Michelin brand tires. Michelin Group is a global leader in tire technology, established a century ago in Clermont-Ferrand, France. In addition to tires, Michelin Group also produces rims, steel wires, mobility assistance systems, travel services, maps and travel guides, with its map and guide publishing arm being a leader in the field. More details are as follows: 1. Michelin is the world's number one tire brand and the inventor of radial tires. In fact, Michelin is a manufacturer with relatively balanced technology, slightly emphasizing comfort and quietness. Although Michelin tires are more prone to wear due to their softer sidewalls, the Michelin EverGrip technology ensures that the tires maintain a certain level of grip even after the tread pattern wears down. Additionally, Michelin tires are generally priced higher, making them suitable for owners who prioritize comfort and quietness and have no budget constraints. 2. Tires are consumables and need to be replaced every few tens of thousands of kilometers. You can refer to the tire wear indicators in the main drainage grooves of the tire. When the tire tread wears down to the level of the wear indicators, it means the tires need to be replaced. When tires reach their wear limit, the wet grip area is significantly reduced, severely compromising safety in wet conditions. Therefore, never wait until the tires are completely bald before replacing them.
9
3
Share

What are the effects of parking on uneven roads for a long time?

Parking on uneven roads for a long time has the following effects on the vehicle: 1. The tires and suspension on the lower side of the vehicle will bear greater force, affecting the chassis and suspension. 2. The higher side of the suspension system will experience uneven force distribution, which may affect the shock absorption performance over time. 3. The chassis may also deform due to prolonged uneven force distribution. Here is some extended information about the effects of long-term parking on uneven roads: 1. Tires, being the part of the vehicle in direct contact with the ground, may deform due to prolonged parking on uneven roads, leading to uneven force distribution. This can cause steering wheel deviation or vibrations while driving, significantly affecting driving comfort and stability. 2. Improper parking can result in doors not closing tightly or poor sealing. Parking on uneven surfaces for extended periods can cause the vehicle to experience unbalanced forces and excessive wheel height differences, leading to frame deformation and twisting. Therefore, it is advisable to choose flat surfaces for parking whenever possible.
18
2
Share

What are the methods to avoid crossing the line when turning in an S-curve during Subject 2?

Here are the methods to avoid crossing the line when turning in an S-curve during Subject 2: 1. When entering the curve, position the front of the car in the middle. When the left corner of the car touches the right line, turn the steering wheel left by one and a half turns (45 degrees) and maintain the course. When the left corner of the car touches the left line of the second curve, straighten the steering wheel. When the right corner of the car touches the left line of the second curve, turn the steering wheel right by one and a half turns (45 degrees). Once the car is straight, straighten the steering wheel and slowly exit the S-curve. 2. When navigating the S-curve, it is crucial to control the speed properly. Press the clutch gently to slow down, which increases reaction time. Even if the direction is slightly off, it can be adjusted in time to avoid crossing the line. 3. There are two entry directions: left entry and right entry. For a left entry, keep the vehicle as close to the right line as possible before turning the steering wheel left. For a right entry, do the opposite—keep the vehicle as close to the left line as possible before turning the steering wheel right. This accounts for the inner wheel difference, preventing the rear wheels from crossing the line during the turn.
19
2
Share

How to Replace Transmission Oil with a Flushing Machine?

There are currently two common methods for replacing transmission oil with a flushing machine: gravity oil change and flushing machine oil change. A flushing machine is a device that utilizes pressure to dynamically replace automatic transmission fluid. The principle involves simultaneously extracting the old oil and injecting new oil, using pressure to push out the old oil with the new oil. The advantages of using a flushing machine for oil change are as follows: 1. The oil change is more thorough, with an oil change rate of over 95%. 2. It is simple and labor-saving. 3. It can clean the internal sludge and metal debris of the automatic transmission, thereby appropriately extending the maintenance cycle of the transmission oil.
8
3
Share

Can Four-Wheel Drive Vehicles Not Be Towed?

Yes, but it depends on the situation. Among the three towing methods—tow rope towing, lift towing, and flatbed towing—only flatbed towing is suitable. Tow Rope Towing: Tow rope towing refers to providing power to the towed vehicle through a tow rope. It is not recommended to tow a four-wheel drive vehicle this way because if the vehicle is not started, the steering wheel cannot be turned, and the brake booster does not work. Forcibly towing may cause the anti-theft module and transmission to lock up, damaging the car. Lift Towing: This involves using a tow truck to lift the two front wheels of the towed vehicle off the ground, relying on the rear wheels to roll for towing. In a four-wheel drive vehicle, all four wheels rotate together, coordinated by the transmission, central differential, and drive shaft. If only the rear two wheels rotate, these three major components fail to coordinate, potentially causing damage to the drivetrain, central differential, and other parts, with significant harm to full-time four-wheel drive vehicles. Flatbed Towing: This method involves lifting the vehicle or using other means to place it on a flatbed truck. In this case, the vehicle is essentially parked on the truck, with neither the front nor rear wheels rotating. As long as it is properly secured, there is minimal risk of damage to the vehicle.
7
1
Share

Can the Key Be Pulled Out Without Engaging the P Gear?

No, the key cannot be pulled out without engaging the P gear. The P gear is a special neutral position that mechanically locks the transmission output shaft to secure the vehicle, functioning as a parking brake to prevent the vehicle from moving. Any gear operation related to the P gear requires the simultaneous use of the brake pedal and the button on the gear lever or pressing down the shift handle. Engaging the P gear: Press the brake pedal, then hold the safety button on the gear lever or press down the shift lever to move to any other gear position, ideally completing the action in one motion. Disengaging the P gear: Press the brake pedal, then hold the safety button on the gear lever or press down the shift lever to return any other gear position to the P gear.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.