What engine is used in the Roewe RX8?

2 Answers
Maddox
07/25/25 7:06am
Roewe RX8 is equipped with a 2.0-liter four-cylinder turbocharged engine codenamed Blue Core. This engine delivers a maximum horsepower of 222 hp, with peak power output of 163 kW and maximum torque of 360 Nm. Produced by SAIC Motor, it powers a mid-to-large SUV. In terms of body dimensions, the Roewe RX8 measures 4923mm in length, 1930mm in width, and 1840mm in height. For transmission, all Roewe RX8 models come with a 6-speed automatic manual transmission. An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc.
Was this review help?
12
0
Share
DiMaverick
08/10/25 6:26pm
My Roewe RX8 at home has been running for over two years, equipped with a 2.0-liter turbocharged engine that provides ample power, making highway overtaking effortless in daily driving. It delivers 224 horsepower and a maximum torque of 360 Nm, paired with a six-speed automatic transmission, ensuring smooth performance. For maintenance, it mainly requires an oil change every 5,000 kilometers, and it runs on 92-octane gasoline, making it cost-effective and practical. In terms of fuel consumption, it averages around 10 liters in the city and 8-9 liters on suburban roads, which isn't the lowest, but considering its off-road capability, it's a fair balance. Regular maintenance is recommended, and cleaning the air filter can improve efficiency and extend the engine's lifespan.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

How to Check the Oil Dipstick on a Camry?

To check the oil dipstick on a Camry, first pull out the dipstick. The specific steps for checking the Camry oil dipstick are as follows: 1. Park the car and turn off the engine for a while, then pull out the dipstick: use a cloth to wipe off the oil marks on the dipstick. 2. Check the oil marks on the dipstick: insert the cleaned dipstick back into the dipstick tube, then pull it out again to check the oil marks. Under normal circumstances, the oil marks should be between the minimum and maximum marks on the dipstick. 3. Determine the oil level based on the oil marks on the dipstick: if the oil marks are below the minimum mark, it means the oil level is insufficient and oil should be added immediately. While adding oil, continuously pull out the dipstick to observe the oil level.
2
3
Share

Which car has a crown-shaped logo?

The crown-shaped logo belongs to Toyota's Crown car. More information about the Crown car is as follows: 1. The Crown is a mid-to-large-sized car brand under the Toyota Group. The Toyota Crown was first produced in Japan on January 1, 1955, and has already seen over 13 generations. The domestic Crown models come with 2.5L, 3.0L, and 4.3L engines, with the first two being V6 24-valve designs and the 4.3L engine being a V8. 2. The Crown is equipped with the Dual VVT-i system, which intelligently varies the timing of both intake and exhaust valves, significantly improving engine intake efficiency, fuel economy, and power performance, resulting in more robust horsepower. In terms of the chassis, it features a four-wheel independent suspension system, providing excellent comfort.
2
0
Share

How Often Should the Car Evaporator Be Cleaned?

Regular cleaning of the car evaporator is crucial, and it is recommended to clean it once a year. The air conditioning evaporator is located inside the dashboard. When the air conditioning is turned on, the evaporator requires heat exchange, causing a large amount of condensation to form on its surface. 1. The incoming outdoor air may carry various dust, bacteria, and impurities, which adhere to the surface of the evaporator along with the condensation. 2. When the air conditioning evaporator is not in operation, it remains in a warm, dark, and humid environment for extended periods, making it highly susceptible to the growth of various bacteria, including mold. Once mold finds a suitable environment, it can proliferate rapidly.
17
1
Share

Can I Take Subject 3 Before Subject 2 in Driving Tests Now?

No, you cannot take Subject 3 before Subject 2. The driving test regulations stipulate that the content and passing standards of the test subjects are uniformly implemented nationwide. The test sequence must follow Subject 1, Subject 2, Subject 3, and Subject 4 in order. Only after passing the previous subject can you proceed to the next one. Here is an introduction to the four subjects of the driver's license test: 1. Subject 1 is a theoretical test. 2. The content of Subject 2 includes five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. Some regions may have additional items. 3. Subject 3 consists of a nighttime light simulation test and an actual road operation test. 4. Subject 4 is a safety and civilization test.
5
2
Share

Where is the diagnostic port located on the Peugeot 2008?

The diagnostic port of the Dongfeng Peugeot 2008 is located behind the lower cover panel beneath the steering wheel. Here is relevant information about OBD: 1. OBD, an abbreviation for On-Board Diagnostics, refers to the vehicle's self-diagnostic system; 2. This system continuously monitors the working conditions of the engine's electronic control system and other functional modules while the vehicle is operating; 3. If any abnormal conditions are detected, it identifies specific faults based on predefined algorithms and stores them as Diagnostic Trouble Codes (DTCs) in the system's memory; 4. The valuable information obtained from the system's self-diagnosis can assist in vehicle maintenance and repair. Technicians can use manufacturer-specific tools to read these fault codes, enabling quick fault identification and reducing manual diagnostic time for more efficient repairs.
3
1
Share

What Causes Insufficient Air Pressure in the Left Front Tire?

Tires consistently having low pressure or the left front tire pressure being lower than the other three may be due to a slow leak in the underinflated tire. Over time, the tire pressure naturally decreases, or the tire may have been punctured by a nail, leading to air leakage. When low tire pressure is detected, it should be promptly inspected and repaired or replaced to prevent safety hazards. The reasons for insufficient tire pressure are as follows: 1. Reason one: Leakage from the tire or valve stem, which requires inspection at a tire shop. 2. Reason two: Deformation of the wheel rim, leading to reduced sealing performance of the tire. 3. Reason three: The vehicle has been carrying overweight loads for an extended period, causing uneven tire stress. 4. Reason four: Thermal expansion and contraction; due to variations in tire manufacturing processes, thermal expansion and contraction may result in insufficient tire pressure.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.