What engine is used in the Changan Yuexiang?

2 Answers
Tim
07/25/25 2:10am
The engine of the Changan Yuexiang is independently developed by Changan Automobile and belongs to a domestically produced engine. The engine model of the Changan Yuexiang is 472Q16. The 1.4L version engine has a maximum power of 74KW, a maximum torque of 135Nm, and a maximum horsepower of 101. The 1.5L version engine has a maximum power of 78.5KW, a maximum torque of 145Nm, and a maximum horsepower of 107. For daily maintenance of the Changan Yuexiang's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance will deteriorate, causing various problems for the engine. To avoid malfunctions, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When the oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to bypass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder generated by part wear to form sludge. When the amount is small, it suspends in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
Was this review help?
18
0
Share
VanColeman
08/10/25 4:26pm
I have personally experienced the Changan Alsvin, which is typically equipped with a Changan self-developed 1.5-liter naturally aspirated four-cylinder gasoline engine, similar to the JL476Q series, with a power output of around 75 kilowatts. The power is sufficient for daily driving, and the fuel consumption is approximately 7-8 liters per 100 kilometers in urban areas, dropping below 6 liters on highways. This engine performs well in terms of smoothness and reliability. I have driven it for several years, and it has minimal vibration at low speeds. However, it's important to change the engine oil and filter regularly to avoid carbon buildup affecting its lifespan. Maintenance costs are moderate, with minor servicing at a 4S dealership costing just a few hundred yuan. It is recommended to use 10W-40 specification lubricating oil.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What is the reason for the Volkswagen Passat's first gear not engaging?

Reasons why the Volkswagen Passat's first gear does not engage: The car temperature is low, and the transmission oil is not fully lubricated. It is difficult to shift into first gear while moving, as the vehicle speed and gear do not match. First gear and reverse gear do not have synchronizers. Gear shifting operation: Depress the clutch pedal—quickly release the throttle—shift to the corresponding gear—match the throttle according to the gear, or do not press the throttle, quickly lift the clutch pedal to the semi-engaged state—gently release the clutch pedal after the clutch is engaged. Gear shifting gesture: When shifting gears, keep your five fingers together, lightly but firmly grasp the gear knob, and use your forearm to guide your hand to shift. Pay attention to shifting with gentle and slow force, not too hard, to avoid shifting into other gears. Always pause in neutral when shifting. If you shift into the wrong gear, don’t panic; you can return to the original gear and shift again.
5
2
Share

What to Do When Car Keys Are Locked Inside the Car and You Can't Open It?

When car keys are locked inside the car, making it impossible to open the door, there is usually a spare key. Here are some methods to open the car door without a key: 1. Seek help from a 4S shop: 4S shops offer after-sales rescue services. Just make a call and wait for the rescue team to arrive. 2. Hire a professional locksmith: Contact a qualified and reputable locksmith to unlock the car. 3. Break the window: There is a technique to breaking the window. Avoid smashing the windshield, especially the triangular window, as the repair cost will be high. Instead, target the door window—be quick, precise, and careful to avoid injury from glass shards. 4. Use a wire or steel wire: After the door is closed, there is usually a small gap on the window. Alternatively, you can remove the window seal and use a wire or steel wire to reach down through the gap to the door lock. Once hooked, pull up to open the door.
11
4
Share

Can Halogen Lights Modified to Xenon Lights Pass Annual Inspection?

Halogen lights modified to xenon lights can pass annual inspection. Currently, there are no explicit legal provisions in China that classify modifying xenon headlights as illegal. However, if the modified xenon headlights have a luminous intensity exceeding the stipulated value, it constitutes an illegal modification. Below is relevant information about xenon lights: 1. Xenon lights, also known as High-Intensity Discharge (HID) lamps, offer advantages such as safety, energy efficiency, high brightness, long lifespan, and easy installation. Many high-end vehicles come equipped with xenon lights as standard, making them a popular choice for headlight modifications. 2. When installing xenon lights, ensure the color temperature does not exceed 6000K. The standard color temperature for factory-installed xenon lights is 4300K, which provides optimal light penetration without causing glare to oncoming traffic. 3. According to Article 90 of the Road Traffic Safety Law, unauthorized installation of xenon headlights is considered a violation of vehicle safety principles, punishable by fines and a 3-point penalty on the driver's license.
19
1
Share

What are the reasons why the Baojun 560 car cannot start after warming up?

Baojun 560 car cannot start after warming up due to reasons such as fuel injector leakage and damaged carbon canister solenoid valve. The specific details are as follows: Fuel injector leakage: Fuel injection by the injector is normal, but leakage constitutes additional fuel supply. The more severe the injector leakage, the richer the air-fuel mixture becomes, leading to difficulty in starting when the engine is warm. Damaged carbon canister solenoid valve: During warm starts, fuel atomization is normal and does not require additional fuel vapor. If the carbon canister continues to supply fuel vapor to the intake tract, it will cause an overly rich air-fuel mixture, making it difficult to start. Faulty intake air temperature sensor: The intake air temperature sensor is responsible for adjusting the fuel injection amount. If it malfunctions, it can cause difficulty in starting when the engine is warm.
19
1
Share

Why is the engine noise loud during cold start?

Engine noise being loud during cold start is a normal phenomenon. If the engine sound is relatively loud during cold start but becomes quieter after about one minute, and the noise is much lower during warm start, this is considered normal. This occurs because after parking, the engine oil automatically flows back to the oil pan. During the next cold start, the oil will gradually return from the oil pan to the vicinity of the cylinder head. The following are hazards of an excessively cold engine: 1. The temperature of the air-fuel mixture (or air) entering the cylinder is too low, resulting in poor combustible mixture quality, making ignition difficult or combustion delayed, leading to reduced engine power and increased fuel consumption. 2. Water vapor in the combustion byproducts tends to condense into water and combine with acidic gases to form acids, intensifying corrosion on engine components and parts. 3. Unvaporized fuel washes away and dilutes the oil film on part surfaces (cylinder walls, pistons, piston rings, etc.), accelerating part wear.
11
2
Share

Can an ETC Only Be Used on One Vehicle?

ETC can only be used on one vehicle, but one card can be bound to multiple vehicles. According to the "Rules for the Use of Non-Stop Fast Passing Systems," when applying for an ETC card, you need to fill out the "ETC Service Payment Deduction Authorization Form," where multiple vehicles can be specified for payment binding. This means there is no limit to the number of vehicles that can be bound to a single ETC card for payment purposes. ETC is the Electronic Toll Collection system, also known as the Automatic Road Charging System. It is a specialized method for toll collection on roads, commonly used on highways, toll bridges or tunnels, and certain sections of urban centers to alleviate traffic congestion. ETC Deduction Principles: Highways have one or more ETC lanes. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at toll stations, the system uses computer networking technology to perform backend settlements with banks. This allows vehicles to pay tolls without stopping at toll booths, all based on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions from vehicles stopping at toll booths, thereby minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and stops, lowering wear and fuel consumption; Improved efficiency: ETC lanes can theoretically increase vehicle throughput by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, intercity transportation smart cards should be widely adopted in key city clusters, and the proportion of vehicles equipped with ETC should significantly increase." It also set a target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles should reach 50%." Future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the adoption rate among passenger vehicles, future efforts will promote ETC usage for trucks. There will also be exploration into deeper integration between ETC systems and smart transportation developments such as vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC usage.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.