What engine is used in the BYD G5?

What Causes a Sudden Loss of Power While Driving Normally?

The reasons for a sudden loss of power while driving normally: 1. Ignition system issues: The vehicle's ignition system includes spark plugs and ignition coils. If there is a problem with the ignition system, the vehicle may exhibit slow RPM increase when the accelerator is pressed. 2. Intake system issues: If the throttle fails or there is a leak in the intake manifold, the vehicle's RPM will not increase when the accelerator is pressed. 3. Fuel delivery system issues: During normal engine operation, the fuel pump needs to build pressure. If the fuel pump cannot generate sufficient pressure, the fuel injectors will not be able to deliver enough fuel, resulting in a lack of power when the accelerator is pressed. 4. Damaged oxygen sensor: The oxygen sensor is responsible for detecting the oxygen content in the exhaust. The ECU uses data from the oxygen sensor to adjust the air-fuel ratio and other parameters such as ignition timing. If the oxygen sensor is damaged, it can cause the vehicle's RPM to fail to increase when the accelerator is pressed.

1

4

Share

What Are the Symptoms of Timing Chain Failure?

Timing chain failure symptoms: abnormal engine noise, high fuel consumption, increased oil consumption, car unable to start, insufficient power, severe exhaust emissions. Timing chain inspection methods: 1. Use a spring scale to check the elongation of the chain at three or more locations. If it exceeds the usable length, it should be replaced promptly; 2. Use a vernier caliper to measure the wear degree of the camshaft and crankshaft sprockets. If it exceeds the usage limit, they should be replaced promptly; 3. Use a vernier caliper to monitor the thickness of the tensioner and chain damper. If it exceeds the usage limit, they should be replaced promptly; 4. Check the elongation, wear, and breakage of the timing chain. If there is minor damage, it should not be used further.

15

2

Share

What are the differences between Zhi Xuan e and Zhi Xuan g?

Differences between Zhi Xuan e and Zhi Xuan g: 1. Different transmissions: Zhi Xuan e uses a five-speed manual transmission; Zhi Xuan g uses an SCVT continuously variable transmission. 2. Different body dimensions: The length, width, and height of Zhi Xuan e are 4160mm, 1700mm, and 1485mm respectively; the length, width, and height of Zhi Xuan g are 4160mm, 1700mm, and 1495mm respectively. Zhi Xuan is a compact car under Toyota, equipped with two engines: one is a 1.3-liter naturally aspirated engine, and the other is a 1.5-liter naturally aspirated engine. The maximum power of the 1.3-liter naturally aspirated engine is 73 kilowatts, with a maximum torque of 123 Newton meters, reaching maximum power at 6000 rpm and maximum torque at 4200 rpm. The maximum power of the 1.5-liter naturally aspirated engine is 81 kilowatts, with a maximum torque of 138 Newton meters, reaching maximum power at 6000 rpm and maximum torque at 4200 rpm.

4

Share

What is the difference between yellow and green license plates for electric vehicles in Zhengzhou?

Differences between yellow and green license plates for electric vehicles in Zhengzhou: 1. Different standards: Yellow-plated electric vehicles do not comply with the new national standards; green-plated electric vehicles comply with the new national standards. 2. Different riding periods: Yellow-plated electric vehicles have a transition period, and those that do not meet the standards after the transition period cannot be used on the road; green-plated electric vehicles have no time restrictions. The new national standard was officially implemented on April 15, 2019. Compared with the old national standard, the new national standard has many changes, such as: the new national standard speed is 25 kilometers per hour, while the old national standard was 20 kilometers per hour; the new national standard vehicle weight is 55 kilograms, while the old national standard was 40 kilograms; the new national standard electric vehicle's motor rated continuous power is 400 watts, while the old national standard electric vehicle's motor rated continuous power was 240 watts.

6

0

Share

What should be paid attention to when replacing the battery of an electric vehicle?

When replacing a car battery, the following points should be noted: 1. Secure installation of the battery: Regularly check whether the battery is firmly installed, including inspecting the battery connection wires and terminals for tightness and ensuring good contact between the wires and terminals. Otherwise, when driving on bumpy roads, the battery may shake or even fall off, causing damage. Loose connection wires could potentially generate sparks. 2. Limit ignition time to 3-5 seconds each time: If the car doesn't start on the first try, wait at least 15 seconds before attempting again. If the car still doesn't start after multiple attempts, avoid prolonged continuous ignition and look for other possible causes. Prolonged high-current discharge can severely damage the internal structure of the battery. 3. Avoid running the air conditioner while the car is idling: When the car is idling, the engine runs at a low speed, and the alternator cannot provide enough power for the air conditioner. This forces the battery to supply the required power, accelerating its wear and tear. 4. Maintain cleanliness and prevent rust: Regularly clean oxides and sulfates that form on the battery terminals. Apply petroleum jelly after scraping off rust to prevent further corrosion. Also, frequently remove dust, dirt, and spilled electrolyte from the battery cover, as well as any oxides or sulfates on the terminals. 5. Do not replace the original battery with one of a larger capacity: The car's alternator has a fixed power output. Installing a battery with a larger capacity may prevent it from being fully charged, making it difficult to start the car. A battery that is consistently undercharged will deteriorate faster.

10

4

Share

Where is the license plate 'Zhe W' from?

Currently, there is no 'Zhe W' license plate. The license plates for various cities in Zhejiang Province are as follows: Zhe A is Hangzhou, Zhe B is Ningbo, Zhe C is Wenzhou, Zhe D is Shaoxing, Zhe E is Huzhou, Zhe F is Jiaxing, Zhe G is Jinhua, Zhe H is Quzhou, Zhe J is Taizhou, Zhe K is Lishui, Zhe L is Zhoushan. The license plate number is the identification plate of the vehicle. The first letter on the license plate represents the city-level code where the vehicle is registered. The rule is: A is the provincial capital, B is the second largest city in the province, C is the third largest city in the province, and so on. The first character of the license plate is a Chinese character, representing the abbreviation of the province where the vehicle is registered.

7

1

Share

What engine is used in the BYD G5?

What Causes a Sudden Loss of Power While Driving Normally?

What Are the Symptoms of Timing Chain Failure?

What are the differences between Zhi Xuan e and Zhi Xuan g?

What is the difference between yellow and green license plates for electric vehicles in Zhengzhou?

What should be paid attention to when replacing the battery of an electric vehicle?

Where is the license plate 'Zhe W' from?

What Causes Yellowing of Tires? How to Clean Them?

What to Do If 12 Points Are Deducted During the Probationary Period?

How to Obtain the Vehicle Environmental Protection Label?

What problems will occur if a car fuse blows?