What engine is equipped in the Zotye Z700?

2 Answers
SanVivian
07/28/25 8:40pm
Zotye Z700 is equipped with a 1.8L turbocharged engine. The engine is a device that converts the chemical energy of fuel into the mechanical energy of piston movement and outputs power externally. The body dimensions of Zotye Z700 are: length 5020 mm, width 1877 mm, height 1469 mm, and the wheelbase is 3000 mm. Zotye Z700 has a maximum horsepower of 177 hp, a maximum torque of 245 Nm, and a maximum torque speed range of 2000 to 4000 rpm. It is matched with a 5-speed manual transmission or a 6-speed dual-clutch transmission. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
Was this review help?
6
0
Share
FelixMarie
08/12/25 1:24am
I've driven a Zotye Z700 as my daily commuter for three years, equipped with a 1.8-liter turbocharged engine, typically model TN4G18T. This engine delivers about 177 horsepower, providing decent acceleration with noticeable push-back force, making highway overtaking effortless. The average daily fuel consumption is around 9 liters, which is quite economical. On a long-distance trip, it handled uphill sections without any struggle, though occasionally it had unstable idling during cold starts in winter, requiring a one-to-two-minute warm-up. In terms of reliability, the engine isn't top-tier—noise increases as it ages, so I check the oil level weekly to prevent leaks. I heard it's discontinued now, but you can still find it in the used car market; however, I recommend a test drive to listen to the engine sound before buying. For maintenance, just change the oil and filter every 5,000 kilometers—don't skimp on small expenses that could lead to big problems. Overall, this engine is suitable for family commuting, offering smooth driving.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

How to Remove the Interior Rearview Mirror of a Buick Excelle?

Method to remove the interior rearview mirror of a Buick Excelle: Hold the cylindrical part of the rearview mirror and rotate it counterclockwise by 45 degrees to detach. For installation, rotate it clockwise by 90 degrees. Additional information about the rearview mirror is as follows: 1. The rearview mirror is an essential component of a car, serving as the driver's "eyes in the back" and plays a crucial role in safe driving. 2. Adjustment method for the interior rearview mirror: Manual adjustment is done directly. When adjusting, use both hands to apply even force and make slight adjustments. Generally, it can be adjusted in all directions (front, back, left, right), but frequent adjustments should be avoided to prevent the mirror from becoming loose. Some vehicle interior rearview mirrors have a locking mechanism that needs to be released before adjustment. After adjustment, secure the lock to fix the mirror in place. 3. Adjustment method for the exterior rearview mirror: Manual adjustment can be done directly, or there may be a control lever near the inner side of the window that can be pulled to adjust the exterior mirror. Make gentle movements when adjusting the lever. If manually adjusting the exterior mirror directly, press lightly on one side of the mirror and adjust gently without applying excessive force to avoid damaging the mirror.
14
5
Share

Is changing lanes in a variable lane considered a traffic violation?

Changing lanes in a variable lane is considered a traffic violation. Here is relevant information about variable lanes: 1. Definition: Variable lanes are primarily set up for sections where traffic is concentrated during peak hours but the number of lanes is insufficient, or where there is a significant difference in traffic flow between morning and evening peak hours. These lanes can change the direction of travel. 2. Function: They address the issue of vehicle flow at intersections severely affected by tidal flow (or "tidal phenomenon"). In simpler terms, during morning peak hours, the straight-through traffic at an intersection may be heavy, while during evening peak hours, left-turn traffic may dominate. This difference in traffic patterns between morning and evening peak hours is known as the tidal phenomenon.
13
2
Share

How to Turn Off the Auto Start-Stop Function in Cadillac XTS?

On the Cadillac XTS center console, next to the gear shift lever, there is a button to turn off the engine start-stop function. It features a circular arrow with an 'A' inside. If you do not wish to use the auto start-stop feature, you can press this button before driving to deactivate it. There are several situations where it is advisable to turn off the auto start-stop function: 1. Temporary parking on a slope. When temporarily parked on a slope, it is best to avoid using the start-stop system. The system starts relatively slowly, and when releasing the brake, the vehicle may slide. The engine might not start quickly enough to provide sufficient braking power, leading to potential hazards. 2. Low-speed parking. Frequent start-stop cycles can result in incomplete fuel combustion, leading to carbon buildup and increased pollutant emissions. Therefore, it is better to turn off the auto start-stop function during parking. 3. When using the air conditioning. In extremely hot weather, especially in southern regions where the air conditioning is running at full capacity, it is recommended to turn off the auto start-stop function. The air conditioning requires significant power, and if the engine is off, the vehicle's electrical system may not provide enough power to run the air conditioning, causing discomfort to passengers. 4. During heavy traffic congestion. In such situations, the engine may remain off for extended periods, causing the combustion chamber temperature to drop. This can lead to the formation of carbon deposits from unburned hydrocarbons and paraffin on the cylinder walls.
12
0
Share

What is the Brake Pedal?

Brake is called the brake pedal, which, as the name suggests, is the pedal that limits power. Here are some related introductions about car brakes: 1. Introduction to brakes: Brakes, also known as deceleration, refer to the action of stopping or reducing the speed of running locomotives, vehicles, other transport tools, or machinery. The general principle of braking is to fix a wheel or disc on the high-speed shaft of the machine, install corresponding brake shoes, bands, or discs on the machine base, and generate braking torque under external force. The brake device is a mechanical braking device that can slow down the speed, also known as a decelerator. 2. Classification of brakes: Drum brakes, advantages of drum brakes, disadvantages of drum brakes, disc brakes, etc.
14
3
Share

Which gear should I start with in Subject 3 driving test?

In the Subject 3 driving test, you are required to start in first gear and then shift up or down according to the speed. During the test, you must shift up progressively as required and cannot jump directly from first gear to third gear. When you hear the voice prompt "Please complete the gear shifting operation," you should adjust the gear to second gear and then shift up sequentially to fifth gear. When in fifth gear, the speed must exceed 40 km/h, after which you should shift down sequentially to second gear. The following are details about starting: 1. Starting procedure: Shift into gear (first gear); Honk (press the horn to warn nearby vehicles or pedestrians); Turn signal (activate the left turn signal to inform vehicles behind); Check the left, right, and interior rearview mirrors (ensure no vehicles are approaching from behind to avoid danger after starting); Half-clutch (provide the vehicle with enough power to move forward); Maintain the throttle to keep the tachometer reading above 1000 RPM (this ensures the vehicle has continuous power to move forward). 2. Common mistakes: The most common mistake at the start is engine stalling, which mainly occurs because: The clutch was not fully depressed when the brake was fully pressed; The clutch was not maintained in the half-clutch position during starting. 3. Solution: Before fully pressing the brake, make sure to fully depress the clutch first; During starting, keep the clutch in the half-clutch position while gently applying the throttle, then gradually release the clutch pedal as you increase throttle pressure with your right foot.
8
0
Share

What is the time interval for consecutive lane changes in Subject 3?

Continuous lane changes require an interval of about 10 seconds. When changing lanes, you need to turn on the turn signal for about 3 seconds. After changing lanes once, turn off the turn signal for about 3 seconds, and then turn it on again before you can change lanes once more. Precautions for consecutive lane changes in Subject 3: 1. First precaution: Avoid habitually releasing the throttle when changing lanes, which may cause gear disengagement; 2. Second precaution: Yield to vehicles in the lane you are merging into; 3. Third precaution: Do not change more than two lanes consecutively at once; 4. Fourth precaution: When vehicles from both the left and right lanes are merging into the same lane, the vehicle on the left must yield to the vehicle on the right.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.