···
Log in / Register

What engine does Soueast Motors use?

1Answers
LaJoanna
07/29/2025, 03:48:27 PM

Soueast Motors' engines are produced by Shenyang Aerospace Mitsubishi and are domestically manufactured. The engine model used by Soueast Motors is the 4A91T, a 1.5T version with a maximum power of 115KW, maximum horsepower of 156PS, and maximum torque of 215Nm. The maximum power speed is 5600rpm. For daily maintenance of Soueast Motors' engines, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, bypassing through the relief valve and bringing contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

Was this review help?
117
Share
More Q&A

What is the horsepower of the BMW 325?

The BMW 325 has a horsepower of 184 hp. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 135 kW and a maximum torque of 300 Nm. The transmission is paired with an 8-speed automatic manual transmission. The vehicle features LED taillights, which effectively enhance driving safety with faster illumination and stronger penetration, reducing the likelihood of rear-end collisions. In terms of interior configuration, the car comes standard with features such as electric adjustment for front seats, Sensatec synthetic leather dashboard, metal-finish buttons, intelligent ambient lighting, three-zone automatic air conditioning, storage package, intelligent connected driving cockpit, 12.3-inch full LCD instrument panel, 10.25-inch touchscreen central control display, and connected application services.
116
Share

What car has a logo with the character 'Song'?

A logo with the character 'Song' represents a car from the BYD brand, specifically the Song model. This vehicle features the Dragon Face family design language on the exterior, equipped with crystal diamond starry LED headlights. The interior is configured with a Star Ring intelligent cockpit, including a central 12.8-inch 8-core adaptive rotating floating Pad that hovers above the center console, achieving adaptive rotation breakthrough. The car's features include ventilated and heated seats, a PM2.5 green air purification system, 360-degree HD panoramic imaging, and a built-in factory dashcam. The BYD Song is powered by a 1.5TI engine paired with a 6-speed automatic transmission, achieving a gear shift time as low as 0.2 seconds.
116
Share

How to Inspect the Quality of a Used Car?

Methods for inspecting the quality of a used car: 1. Check the exterior wear and tear. Choose a well-lit area and observe the car at a 45-degree angle to spot any scratches or hidden dents; 2. Inspect the body frame for damage. If the car has been in a major accident, the frame will show varying degrees of dents or misalignment; 3. Find out why repainting or bodywork was done—whether it was due to minor scratches or a severe collision; 4. Check the wiring harness in the engine compartment for corrosion or aging, and inspect the engine block and mechanical parts for mold spots; 5. Look for leaks in fluids such as engine oil, brake fluid, and coolant.
115
Share

Is Coolant Entering the Cylinder a Serious Problem?

Coolant entering the cylinder is a serious issue. Its functions include: 1. Corrosion prevention for cooling system components; 2. Preventing scale formation and reducing radiator heat dissipation; 3. Ensuring the engine operates within the normal temperature range. Precautions for using coolant: 1. Regularly check the coolant level and replenish it promptly if it falls below the minimum mark; 2. Observe whether the coolant has any turbid sediments, and replace it in time if turbidity is found; 3. Different vehicle models use coolants of different colors, which should not be mixed. Correct steps for adding coolant: Open the vehicle's engine hood, locate the coolant reservoir in the upper right corner, open the coolant plug under the radiator, and add the coolant directly.
106
Share

What to Do If the Fast Charging Current of a New Energy Vehicle is Too Small?

New energy vehicle charging current becoming smaller is usually due to damage to the generator's regulator, or poor connection or oxidation of the generator's output line, which requires repair. The following is a detailed explanation about new energy vehicles: 1. Definition: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new on-board power devices), integrating advanced technologies in vehicle power control and driving, resulting in advanced technical principles and featuring new technologies and structures. 2. Classification: New energy vehicles include pure electric vehicles, extended-range electric vehicles, hybrid electric vehicles, fuel cell electric vehicles, hydrogen engine vehicles, etc.
111
Share

Should You Use Internal or External Air Circulation When Warming Up Your Car in Winter?

In winter, alternate between internal and external air circulation when warming up your car. Initially, use internal circulation to retain the initial heat. Once the temperature rises, switch to external circulation, which utilizes the car's electric heating grid to warm the fresh air. A few minutes before parking, turn off the heater and switch to external circulation to allow the temperature of the air conditioning pipes to align with the outside temperature, ensuring relative dryness within the air conditioning system and preventing bacterial growth. Internal circulation is primarily used to effectively block external dust and harmful gases from entering the car, such as when driving through areas with smoke, dust, strong odors, or in heavy traffic, to prevent harmful exhaust emissions from the vehicle ahead.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.