What Driver's License is Required for a Mercedes-Benz Yellow License Plate?

1 Answers
DeclanAnn
07/30/25 7:47am
Mercedes-Benz yellow license plate requires a B1 or B2 driver's license. B1 Driver's License: The B1 license allows driving medium-sized passenger vehicles, defined as those not exceeding 6 meters in length, with a rated passenger capacity of 10 (inclusive) to 19 (inclusive) persons. Other vehicle types permitted include C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled vehicles), and M (wheeled self-propelled machinery). It's important to note that the B1 license does not cover B2 vehicles. If a B1 license holder wishes to drive large trucks, they can upgrade their license to a B1B2 (or A1, A2, A1A2, etc.). B2 Driver's License: The B2 license permits driving heavy and medium-duty trucks or large, heavy, and medium-sized specialized operation vehicles. Heavy and medium-duty trucks are primarily trucks, such as the large dump trucks commonly seen on roads carrying construction debris. Large, heavy, and medium-sized specialized operation vehicles refer to vehicles equipped with special devices or equipment, such as water sprinklers, concrete mixers, fire trucks, etc.
Was this review help?
14
2
Share
More Forum Discussions

Can motorcycles go on highways in Yunnan Province?

Motorcycles can go on highways in Yunnan Province. There are no regulations prohibiting motorcycles from entering highways, as long as they comply with the requirements. However, provinces and cities such as Henan, Shandong, Jiangsu, Fujian, Jiangxi, Sichuan, Chongqing, Ningxia, Hainan, Shanghai, Zhejiang, and Qinghai explicitly prohibit motorcycles from entering highways. Below are the specific regulations for motorcycles on highways: Prohibited from highway access: Pedestrians, non-motorized vehicles, tractors, wheeled special machinery vehicles, articulated buses, full-trailer trucks, and other motor vehicles with a maximum design speed of less than 70 kilometers per hour are not allowed on highways. Speed regulations: Highways should indicate the speed limits for lanes, with the maximum speed not exceeding 120 km/h and the minimum speed not below 60 km/h. Motorcycle speeds should be controlled between 60-80 km/h, carrying passengers is prohibited, and they must drive in the rightmost lane. When driving on highways, riders must wear helmets.
20
3
Share

Why did the car horn suddenly stop working?

The horn is the sound signal device of a car. During driving, the driver issues necessary sound signals as needed and required to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and conveying signals. Here is additional information: 1. The principle of a car horn: An electric car horn produces sound through the vibration of a metal diaphragm. It consists of an iron core, magnetic coil, contacts, armature, diaphragm, etc. The working principle of an air horn is to use the airflow of compressed air to vibrate the metal diaphragm and produce sound, so it can only be used on vehicles equipped with an air compressor. 2. Reasons why the horn does not work: Check the sound of the horn. If it sounds unclear, low, or weak, it is mostly due to poor contact at the connection points. Repeatedly pressing the horn switch, if the horn sometimes works and sometimes does not, is mostly due to poor contact inside the switch. If there is a significant "hissing" friction sound when turning the steering wheel left or right, some lubricant can be sprayed onto the relevant contact points.
12
1
Share

How to Replace the Coolant in a X-Trail?

The steps to replace the coolant in a X-Trail: 1. Locate the coolant drain screw, which is positioned right in the center of the bumper, and loosen it with a Phillips screwdriver; 2. Once most of the coolant has drained, pour distilled water into the coolant filler port to flush the cooling system, rinse out any remaining coolant, and then use an air gun to blow out excess water; 3. Tighten the coolant drain screw, add new coolant through the filler port until the level is between the max and min marks, then wait for the car to purge air. During this process, the coolant level may drop, so it's important to add more coolant as needed; 4. When the cooling fan starts running, it indicates that the engine has reached normal operating temperature. At this point, if the coolant level is between the max and min marks, you can close the coolant filler cap. The X-Trail is a classic SUV, positioned as an urban four-wheel-drive vehicle, equipped with an intelligent all-mode 4WD system. Through this system, drivers can freely choose between two-wheel drive, automatic, or locked four-wheel drive modes to handle various road conditions.
12
1
Share

What Causes a Strong Jerking Sensation When Shifting into Reverse Gear?

Here are the specific reasons why a car may experience a strong jerking sensation when shifting into reverse gear: 1. Engine oil passage blockage: The combustion of fuel is determined by the engine's ignition, intake, and fuel injectors, which are also the source of the engine's power. If the intake volume decreases, the ignition weakens, or the fuel injection reduces, the power output will be insufficient, leading to a jerking sensation. 2. Dirty transmission fluid: This can cause damage to the solenoid valves. If sludge in the transmission fluid circulates and blocks the oil passages in the valve body, it will result in jerking issues. Over time, this can lead to a series of transmission problems such as overheating, impact, and slippage. 3. Break-in period: A slight jerking sensation during driving is normal during the break-in period because the vehicle's power output and component engagement are not at their optimal levels. Additionally, the transmission's computer has a self-learning mechanism that continuously adjusts oil pressure for gear shifting.
10
0
Share

How Long Can Dash Cam Footage Be Retrieved?

Dash cam recordings are generally stored for three days to one week, with the actual duration determined by the memory card's capacity. When the storage card is full, newly recorded videos will directly overwrite the oldest footage. The reason for a dash cam's time reset is due to the absence of a battery or the battery being depleted. Points to Consider When Choosing a Dash Cam: Dash cam clarity; Dash cam recording mode. Dash Cam Clarity: When selecting a dash cam, the first concern is its clarity. It should be able to clearly capture pedestrians' faces or vehicle license plate numbers. Generally, choosing a 1080P resolution is sufficient. Lower resolution videos are too blurry to be of much value, while excessively high-resolution videos take up too much storage space, leading to the unnecessary hassle of frequently replacing memory cards. Dash Cam Recording Mode: Besides clarity, it's also important to choose a dash cam with loop recording. When the memory card is full, failing to replace it in time due to oversight can often result in emergency events not being recorded promptly. A dash cam with loop recording can overwrite old footage with new recordings when the memory card is full, ensuring no potential situation is missed.
10
4
Share

What Directions Do Road Sign Colors Represent?

Blue background with white text indicates east-west directions, while green background with white text indicates north-south directions. Below are the correct methods for reading road signs: 1. General road direction signs: Color and graphics - blue background, white graphics, white borders, blue edging. Classified by function: route guidance signs, location guidance signs, road facility guidance signs, and other road information guidance signs. 2. Principles for reading road signs: Generally follow the principle of 'left for near, right for far' and 'top for near, bottom for far'. Route guidance signs are divided into: intersection advance signs, intersection notification signs, and confirmation signs. General road intersection advance signs are mainly used on highways; due to the high density of urban road networks and short distances between intersections, these advance signs are rarely set up in cities. General road intersection notification signs have identical layouts and information to advance signs, with the sole difference being that advance signs include distance information on their panels.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.