What does violation code 10721 mean?

2 Answers
MacAdam
07/29/25 7:43am
Violation code 10721 means: Driving a motor vehicle with incomplete safety equipment. According to Article 21 of the "Road Traffic Safety Law of the People's Republic of China," no points will be deducted; the fine amount is 200; other penalties: none. Traffic violation codes consist of four to five digits, classified according to the principles in the traffic law. The order from left to right is: the first digit is the behavior classification code, the second digit is the points classification code, the third and fourth digits are the sequential code, and the fifth digit is the item number. First digit: Behavior classification code, indicating the classification code in the Road Traffic Law; Second digit: Points classification code, indicating the classification code for traffic violation points; Third and fourth digits: Sequential code, indicating the order of the behavior within the same behavior classification. For example: 13035—"1" indicates a motor vehicle behavior, the second digit "3" indicates 3 points will be deducted, and the following "035" indicates the fifth item of the third behavior in the 3-point deduction category. Behavior classification code violation descriptions: Codes starting with 1 indicate motor vehicle traffic, e.g., 1003; Codes starting with 2 indicate non-motor vehicle traffic, e.g., 2002; Codes starting with 3 indicate pedestrian or passenger traffic, e.g., 3030; Codes starting with 4 indicate highway traffic, e.g., 4002; Codes starting with 5 indicate other regulations, e.g., 5005; Codes starting with 7 indicate implementation rules of provinces, autonomous regions, or municipalities, e.g., 7008; Codes starting with 8 indicate local regulations of cities (regions, autonomous prefectures, or leagues), e.g., 8606. There are four common methods to query motor vehicle violations: Visit the office halls of traffic branches in various districts and counties to query through touch terminals; Log in to the external service websites of the public security traffic management bureaus of various cities, find the vehicle violation query section, enter the license plate number and vehicle engine number, and click to query; Call the hotline (area code + 114) to query; Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to query.
Was this review help?
20
2
Share
LeDiana
08/12/25 11:00am
I've been driving for twenty years and am very familiar with traffic violations. Violation code 10721 mainly refers to motor vehicles violating prohibition sign instructions, such as driving past signs indicating no left turns or no entry. This is quite common, especially when navigation is inaccurate in unfamiliar cities. The penalty is usually 3 demerit points and a fine of 200 yuan, and it may also affect car insurance rates. I once missed a no-entry zone sign in the city and got caught, which not only cost me money but also ruined my mood. Prevention methods are quite simple: study the route before driving, use navigation reminders more often, and don’t rush to cut lanes. Safe driving is more important than anything else—violations are not only dangerous but also add trouble to life. Developing good habits can save a lot of hassle.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

What is Cold Running-in for New Cars?

Cold running-in for new cars refers to the process where the engine's internal components transition from their initial manufactured state to an operational state before reaching normal working temperature. After this running-in period, the surfaces of these parts become smoother, the contact area between components increases, and their fit becomes tighter, preventing localized overheating and potential sintering under extreme conditions. Cold running-in procedure: Before driving: Pre-warm the cold engine. Newly manufactured vehicles still have component wear, so proper pre-warming is necessary; While driving: Shift gears promptly. For manual transmissions during the running-in period, proper gear shifting is essential. Use appropriate gears for different driving conditions to avoid high-gear low-RPM or low-gear high-RPM situations; During maintenance: New vehicles require timely maintenance during the running-in period. The first service is particularly important—timely completion ensures safer vehicle operation. Cold running-in precautions: Pre-warm the cold engine for 30 seconds to 1 minute before moving; Avoid overloading during running-in; Pay attention to fuel and oil quality; Control driving speed; Avoid sudden acceleration, speeding, and emergency braking; Address any malfunctions immediately; Ensure sufficient engine oil, coolant, and proper tire pressure with no leaks—replenish if deficient. Cold running-in for automobile engines refers to the process where the engine is mounted on specialized equipment and run by an electric motor. Key information about new car cold running-in includes: 1. When the engine operates normally without generating high temperatures from fuel combustion, it's called cold running-in. 2. Conversely, hot running-in typically refers to engine operation in the vehicle through fuel ignition and combustion. 3. Running-in describes the initial break-in period when the engine is driven by motor power before reaching working temperature. 4. Most component wear occurs during cold running-in, so avoid excessive force during this phase.
2
2
Share

What to Bring for the First Maintenance at a 4S Shop?

Items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle's registration certificate; vehicle's purchase invoice, to be taken to the designated first maintenance facility for the vehicle's initial service. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven. It is essential for the car to undergo its first maintenance on time, neither earlier nor later. Completing the first maintenance indicates that the car can be driven according to the standard load and normal speed as required. The timing for the first maintenance is calculated based on the date the car was picked up. There are two indicator values for the first maintenance: mileage and time. Whichever comes first will be the standard. First maintenance items include: changing the engine oil and oil filter, cleaning the air filter, checking various oil levels for normalcy, inspecting the generator belt and wiper blades for damage, checking tire pressure for normalcy, and examining tires for damage or bulges, etc. Required time: Completing all tasks takes approximately 2 hours. The most crucial aspect of a new car's first maintenance is changing the engine oil and oil filter. When changing the engine oil, the oil filter must also be replaced simultaneously. The selection of engine oil must refer to the "Vehicle Usage and Maintenance Manual," as different models specify different engine oil grades. Maintenance precautions: Do not wash the interior of the car body with water: Many people clean their cars themselves during holidays. Here, it is important to remind that the interior of the car body should not be directly washed with water. If the floor mats are dirty, a vacuum cleaner can be used, or they can be taken out, scrubbed with a brush and detergent, dried, and then placed back. There are many vent holes under the rubber mats on the floor of the driver's compartment. If water enters, it will not dry naturally but will flow through the vent holes to areas like the gearbox, causing erosion and corrosion. A better approach is to clean with a vacuum cleaner and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is low, it is recommended to drain the existing antifreeze and add the same brand of antifreeze from the start. Since antifreeze brands differ, their chemical properties vary significantly. Various functional additives may corrode those from other brands. Different brands of antifreeze use different additives, so they should not be mixed to avoid unnecessary trouble. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, they are often oiled to function properly again. To prevent rusting of bolts and nuts on the wheels, some people apply lubricant, which can introduce unnecessary risks to safe driving. At high speeds, bolts and nuts may loosen or even fall off, leading to driving failures.
20
1
Share

What is the ESP system?

ESP, known in Chinese as the Electronic Stability Program, is an active safety feature in vehicles designed primarily to prevent skidding. It controls the braking of specific wheels when there is a significant difference in the speed of the four wheels. How ESP works: In cases of understeer, ESP will brake a specific rear wheel. For example, if there is understeer to the right, it will brake the right rear wheel, and if there is understeer to the left, it will brake the left rear wheel. Similarly, in cases of oversteer, ESP will brake a specific front wheel. Oversteer to the right will result in braking the left front wheel, while oversteer to the left will result in braking the right front wheel. On icy or snowy roads, if the vehicle starts to skid, ESP will also control the corresponding wheels to maintain stability. When to turn off ESP: When the vehicle is stuck in mud or during off-road driving: In situations where the vehicle is stuck or during other off-road conditions, some wheel slip is necessary to help the vehicle get unstuck or climb obstacles. Here, ESP's function of preventing wheel slip can be counterproductive. Therefore, during extreme off-roading or when stuck, it is advisable to turn off ESP to facilitate recovery. When encountering wheel slip while climbing in snow or rain: On snowy or wet roads, especially when going uphill, wheels are prone to slipping. The vehicle's computer may detect this slip and limit engine output, so it's best to turn off ESP before attempting to move. When using snow chains: Snow chains alter the wheel's outer diameter and can interfere with the data from certain sensors in the ESP system, leading to inaccurate signals. This can disrupt the normal functioning of ESP, possibly causing it to intervene constantly or trigger fault codes. In such cases, it is advisable to turn off ESP.
8
3
Share

What does it mean when the car's set light stays on?

Set is the tire pressure monitoring light. If the vehicle's set light stays on, it indicates a tire pressure alarm, and the tire pressure needs to be stored. More information about the tire pressure monitoring light (Set) is as follows: 1. Tire pressure monitoring automatically checks the tire pressure in real time while the vehicle is in motion, alerting the driver to leaks or low pressure to ensure driving safety. 2. If the tire pressure system alarm is triggered, pull over and check the tire pressure of all four tires. If no obvious loss of pressure is visible, you can ignore it, reset the tire pressure system in the car, and continue driving once the warning light goes off. If the tire pressure warning light comes on again, it means there is an issue with one of the tires, and it should be inspected and repaired promptly. 3. If the tire pressure monitoring system warning light comes on while driving, reduce speed, avoid sharp steering and sudden braking, and check the tires immediately.
3
0
Share

What to Do When the Car Navigation Screen Doesn't Light Up?

Navigation screen not lighting up can often be resolved by restarting the vehicle. If there is no change, it may indicate a hardware issue, and the vehicle should be taken to a 4S shop for repair or replacement as soon as possible. When purchasing a navigation system, pay attention to the following points: 1. Check and test the system's accuracy. Choose a familiar route to test whether the system can accurately display the vehicle's position. 2. System storage capacity. The car navigation system should have corresponding hard drive memory. 3. Image display. The image display of the car navigation system can be installed on the vehicle's dashboard, laptop, or handheld computer screen. The display screen should have good brightness, size, and resolution to adapt to different weather and lighting conditions.
14
4
Share

What is the displacement of the N55 engine?

The displacement of the N55 engine is 3.0 liters, which is a 3.0-liter inline six-cylinder turbocharged engine with relatively strong power. Composition of the N55 engine: The N55 engine housing consists of the engine block, cylinder head, cylinder head cover, oil pan, and seals. The block is made of die-cast aluminum alloy, comprising the crankcase and base plate. Advantages of the N55 engine: The cylinder head of the N55 engine is a newly developed product. For the first time in a BMW six-cylinder engine, it features direct injection, an exhaust turbocharging system, and Valvetronic. The cylinder head has a compact structure and is equipped with the third-generation Valvetronic. The combination of the exhaust turbocharger, Valvetronic, and direct injection is referred to as Turbocharged Valvetronic Direct Injection, which reduces CO2 emissions or fuel consumption by 3-6 percentage points. Models equipped with the N55 engine: The N55 engine is used in various BMW models such as the 135i, 335i, 535i, 640i, 740i, and Z4. This engine has also been introduced into the domestic market and can be found in imported 335i and domestically produced 535i models in the current Chinese market.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.