What does the TNGA architecture of the Highlander mean?

1 Answers
JesseDella
07/29/25 3:17pm
The TNGA architecture of the Highlander refers to the fact that the all-new generation Highlander is built on Toyota's TNGA platform. Below is relevant information about the Highlander TNGA: 1. The TNGA platform is Toyota's latest vehicle manufacturing platform. 2. As the all-new generation Highlander is built on this new platform, the vehicle's exterior has undergone significant changes, with an overall more sporty design. 3. As a mid-size SUV, the body dimensions of this model are 4950/1925/1720mm in length, width, and height, with a wheelbase of 2790mm. Compared to the previous generation, the length of the new model has increased by 60mm. 4. In terms of the powertrain, the 2020 Highlander will offer consumers a 2.5L hybrid version and a 3.5L V6 fuel version. The fuel version is paired with an 8-speed automatic transmission, while the hybrid version uses an E-CVT transmission.
Was this review help?
7
1
Share
More Forum Discussions

What Causes Car Window Squeaking?

Car window squeaking can be attributed to the following reasons: Component Aging: Press the window switch button and observe the window's movement track to check for noticeable up-and-down fluctuations. If present, it's likely due to component aging, and the only solution is to replace the affected parts. Presence of Debris Particles: Over time, debris particles inevitably accumulate on the window tracks. As the window moves along these tracks, friction with the debris can cause squeaking. Apply lubricant to both sides of the window tracks to resolve this issue. Loose Screws: Loose screws can lead to squeaking in both the roof and windows, and may even pose a risk of the window falling off. Tightening the window screws can eliminate this problem.
18
1
Share

What is the typical fuel consumption per 100 kilometers for a 2.0L naturally aspirated engine?

2.0L naturally aspirated engines typically consume 8-11L of fuel per 100 kilometers. Fuel consumption per 100 kilometers parameter: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when traveling a hundred kilometers on the road at a certain speed, serving as a theoretical indicator for the vehicle. This value is obtained by manufacturers under controlled conditions using a dynamometer installed on the vehicle's chassis to measure and convert into speed parameters, then calculating the theoretical experimental fuel consumption data for the vehicle model at specified speeds. Road condition fuel consumption: Road condition fuel consumption is a fuel indicator calculated based on values determined through repeated tests where the vehicle travels on specified roads at prescribed speeds and times, also known as multi-condition road cycle fuel consumption.
9
4
Share

What Causes Car Shaking After Ignition?

Car shaking after ignition can be attributed to the following reasons: Engine Misfire: Engine misfire mainly refers to one or more cylinders in the engine not functioning properly. This is usually manifested as intermittent exhaust gas flow, severe shaking of the exhaust pipe, and noticeable engine vibration, sometimes accompanied by a sputtering sound. Worn or Loose Engine Mounts: Engine mounts are rubber blocks placed between the engine and the car frame. Their purpose is to reduce vibration and provide cushioning during engine operation, as well as to secure the engine in place. Once these mounts become worn or loose, the engine's vibration will become significantly more pronounced. Replacing the engine mounts can greatly reduce this effect. Carbon Buildup Issues: Cars are inevitably prone to carbon buildup, which includes carbon deposits in the cylinders, throttle body, spark plugs, and intake system. When there is excessive carbon buildup inside the engine, the car's ignition energy, air intake efficiency, and air-fuel mixture ratio can be affected, leading to unstable power output. This results in shaking during idling and acceleration.
11
1
Share

What are the reasons for the car's inability to accelerate when stepping on the gas?

The reasons for the car's inability to accelerate when stepping on the gas are as follows: Carbon buildup: Carbon deposits on the valves, idle air control valve, intake manifold, combustion chamber, and spark plugs can cause a lack of power when accelerating. Driving in congested areas: Frequent acceleration and deceleration in heavy traffic over a long period can result in sluggish acceleration when driving again. Poor fuel quality: Using low-quality gasoline can affect the fuel filter and fuel lines, leading to insufficient fuel supply and thus poor acceleration. It can also shorten the lifespan of the catalytic converter in the exhaust system. A clogged catalytic converter will directly impact the vehicle's acceleration performance, increase fuel consumption, and cause sluggish acceleration.
2
4
Share

Can You Drive with Low Engine Oil?

Driving with low engine oil is not recommended as it can cause significant damage to the engine, leading to higher repair costs. Effects of Low Engine Oil: Without sufficient engine oil, the engine loses its protective layer, which is essential for lubrication, cooling, cleaning carbon deposits, corrosion prevention, and wear resistance. Continuing to drive without adequate oil increases friction between engine components, accelerating wear and enlarging gaps between parts. Additionally, the engine cannot be cooled effectively, potentially causing issues like burning, scoring, or cylinder scuffing. Engine Oil Fill Level: It's also important not to overfill the engine oil. The oil level should not exceed the upper limit marked on the dipstick, as this can increase engine load and negatively impact performance.
12
2
Share

What are the classifications of motorcycle driver's licenses?

Motorcycle licenses are divided into three types: D, E, and F. These licenses are primarily categorized based on engine displacement, with additional consideration given to the vehicle's structural type. New regulations for examination items: Most motorcycle license tests now combine Subject 2 and Subject 3. Previously, Subject 2 included items such as slalom (weaving through cones), crossing a single-plank bridge, hill start, and additional Subject 3 items specified by provincial traffic authorities. Currently, the field test has been expanded from 4 items to 11 items, significantly increasing the difficulty of obtaining a motorcycle license. Specific details of examination items: 1. Slalom test: Starting from the beginning point, the rider must navigate through cones as indicated by arrows and stop at the endpoint. 2. Single-plank bridge test: - Standard two-wheel motorcycles and mopeds must cross the single-plank bridge. - Three-wheeled vehicles and regular three-wheeled motorcycles must have their left and right rear wheels successively pass the left and right single-plank bridges. - Sidecar motorcycles must have their front wheel and left rear wheel pass the left single-plank bridge, followed by the right rear wheel passing the right single-plank bridge.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.