···
Log in / Register

What does the steering wheel symbol on the car dashboard mean?

1 Answers
OAaron
07/24/25 12:18pm

The appearance of the steering wheel symbol on the car dashboard is a reminder to the driver that the vehicle is low on power steering fluid and needs to be replenished. The specific steps to add power steering fluid to the car are as follows: 1. Open the driver's door of the car; 2. Pull the car's hood release lever; 3. Lift the car's engine hood; 4. Use the support rod to secure the engine hood, ensuring it is firmly supported to avoid any hazards during the operation; 5. Add power steering fluid to the small reservoir of the car up to the MAX mark.

Was this review help?
14
2
Share
More Forum Discussions

What are the tire sizes for the Camry?

The Camry has three tire size specifications: 235/45R18, 205/65R16, and 215/55R17. In 235/45R18, the first number 235 represents the tire width of 235MM, 45 indicates the aspect ratio of the tire section is 45%, meaning the section height is 45% of the width, and 18 represents the rim diameter of 18 inches. The letter "R" in the middle stands for radial tire. In 205/65R16, the first number 205 represents the tire width of 205MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 16 represents the rim diameter of 16 inches. The letter "R" in the middle stands for radial tire. In 215/55R17, the first number 215 represents the tire width of 215MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 17 represents the rim diameter of 17 inches. The letter "R" in the middle stands for radial tire. The Camry tires are of the Dunlop brand, featuring an asymmetric unidirectional tread design, with the spare tire being non-full size. If you wish to replace the tires yourself, follow these steps: Retrieve the spare tire and jack, place the jack under the vehicle frame near the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, ensuring the jack is positioned correctly under the vehicle and forms a right angle with the ground; Remove the hubcap, loosen the nuts counterclockwise, but do not fully unscrew them—just enough to eliminate resistance. Keeping the tire on the ground when loosening the nuts ensures the nuts turn rather than the tire; Turn the nuts counterclockwise until they come off, repeating this step for all lug nuts, then fully remove the nuts; Place the new tire on the hub, carefully aligning the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are snug. The tire replacement is now complete. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim size compatible with the tire for practical use, such as "Standard rim 5.00F".
1
4
Share

Can Alcohol Be Stored Inside a Car?

From a safety perspective, 75% alcohol should not be kept in a car. Here are the potential hazards of storing alcohol in a vehicle: 1. Low Flash Point: Alcohol has a flash point of only 20 degrees Celsius, and if the interior temperature of the car becomes too high, it may cause combustion. Therefore, it is advisable to avoid storing alcohol in the car. 2. Damage to Interior: If alcohol is used inside the car, and the seats or steering wheel are made of genuine leather, spraying alcohol directly on these surfaces can cause damage. Since alcohol is an organic solvent, it may have an even greater impact on vehicles with lower-quality leather interiors.
19
4
Share

Why won't the car move after starting?

Reasons why the car won't move after starting are as follows: 1. Check if the handbrake is released: If not, release it and shift gears again. 2. Check if the car has stalled: If it has stalled, it may be a transmission failure. 3. Clutch plate failure: If the engine is running fast but the car doesn't move, it indicates a clutch plate failure. Diagnosis for the car not moving when in gear: 1. Car not moving when in gear: This is a functional comprehensive fault involving the clutch, transmission, and drive axle. 2. Car not moving when starting in a certain gear: If the drive shaft doesn't rotate, the fault lies in the transmission.
6
4
Share

What is the pressure of truck tires?

Here is the pressure of truck tires: 1. No uniform standard: Trucks have different tire pressure standards according to different usage environments, tire model standards, layers or actual specifications, etc. 2. Pressure: For tires below 825, the pressure should not exceed 10; for steel wire tires above 825, the pressure should not be lower than 12. For tire model 650, the pressure is 6.5; for 750, it is 7.5. Below is extended information about truck tires: 1. Meaning of numbers: The first number indicates the tire section width, and the latter one indicates the rim diameter, in inches. 2. Example: For example, 205/55R19 means a radial tire with a width of 205 mm, an aspect ratio of 55, and a rim diameter of 19 inches.
5
1
Share

What to Do If Your Car Is Towed Away?

If your car is towed away due to a traffic violation, it will be taken to the local traffic management bureau's parking lot. You need to call 122 or contact the local traffic police detachment for assistance. The relevant details are as follows: 1. Required documents: Your driver's license, vehicle registration certificate, and ID card. If someone else is handling the matter on your behalf, they will need their own driver's license, ID card, and your vehicle registration certificate. These documents must be presented at the local traffic police detachment for processing. 2. Check for damages: When retrieving your car after it has been towed, carefully inspect the vehicle for any damages. If damages are found, you can apply for compensation according to the regulations.
6
4
Share

What is the cause of the slight clunking noise in the BMW X5?

It may be caused by a transfer case malfunction. Here are the relevant details: 1. BMW: BMW, the Chinese full name being Bavarian Motor Works, is a German luxury automobile brand. BMW's vehicle series include the I, X, Z, and pure numeric models, as well as the 1, 2, 3, 4, 5, 6, 7, and 8 series, along with the M series, which is based on improvements to the various series. 2. Transfer Case: The transfer case is a gear transmission system whose input shaft is directly or through a universal drive device connected to the second shaft of the transmission. It has several output shafts, each connected to the drive axles via universal drive devices.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.