What does the SET button in a car mean?

Does the ETC have to be registered under the vehicle owner's name?

It is possible to apply for an ETC even if you are not the vehicle owner. According to the "Implementation Plan for Accelerating the Application of Electronic Toll Collection (ETC) on Highways" issued by the Ministry of Transport, the following documents are required: the original valid ID card of the vehicle owner, the original and a copy of the vehicle registration certificate (showing the most recent annual inspection stamp page). If applying on behalf of someone else, the original valid ID card of the agent is also needed. When applying for ETC through major bank branches, you will also need to prepare a debit card or credit card from the corresponding bank. Some banks only support ETC binding with credit cards, while others may require freezing a portion of the amount as a deposit when binding with a debit card. ETC billing principle: There are one or more ETC lanes on highways. Through dedicated short-range microwave communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used for backend settlement with the bank. This allows vehicles to pay tolls without stopping at toll booths, all based on the principle of "pass first, deduct later." Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Low-carbon travel, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution. Reduced wear and tear: Saves costs by reducing the frequency of vehicle starts and brakes, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees. Improved efficiency: The theoretical efficiency of ETC lanes can be 2-3 times higher than traditional lanes, making ETC faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, key city clusters should achieve interoperability of transportation cards, and the proportion of vehicles equipped with ETC should significantly increase." The plan also sets a target of "50% ETC usage rate for road passenger vehicles by 2020." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, efforts will be made to promote ETC usage for trucks and explore deeper integration of ETC systems with smart transportation directions such as vehicle-to-vehicle communication and vehicle-road coordination. This will provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC. ETC usage precautions: The ETC transaction sensing range is 8 meters. If the vehicle in front stops, maintain a distance of at least 10 meters to prevent automatic payment for the vehicle ahead in case of ETC device failure or absence. The recognition speed for ETC lanes is 20 km/h. Driving too fast may result in failure to read the vehicle's device information and billing failure. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, may render the tag invalid. In such cases, the device can be taken to the bank where the ETC card was issued or the highway service office for inspection. If the issue is not due to human interference, reactivation may suffice. When using a debit card bound to ETC, insufficient balance may cause billing failure. Follow the guidance of on-site staff to use manual MTC lanes and pay with cash or card. Thick windshields may cause poor signal reception. This is especially important for vehicles that have had their windshields replaced after accidents or for those with modified front windshields.

20

5

Share

Does the Lavida have a rear anti-collision beam?

The Lavida is equipped with a rear anti-collision beam. Functions of the rear anti-collision beam: 1. Absorbing impact force: During low-speed collisions, the beam absorbs collision energy through compression deformation, reducing vehicle damage in such scenarios. 2. Preventing deformation: Without a rear anti-collision beam, when the rear of the vehicle is impacted, after the energy-absorbing material absorbs part of the collision energy, the remaining energy would inevitably transfer to the entire rear panel, ultimately causing deformation. 3. Reducing repair costs: During a collision, the anti-collision beam can transfer part of the unabsorbed collision energy to the left and right longitudinal beams, which then disperses throughout the vehicle body. This prevents all the impact force from acting directly on the rear of the vehicle, minimizing damage to the body and significantly lowering repair costs.

13

0

Share

What is the actual fuel consumption of the 2.4L Elysion?

Honda Elysion 2.4L actual measured fuel consumption is 9.15 liters. Methods to reduce fuel consumption: 1. Improve fuel economy: Fuel economy is determined by multiple factors including driving conditions, driving habits, vehicle condition and load. Whether the rated fuel economy of this vehicle can be achieved depends on the above and other conditions. 2. Maintain proper tire pressure: When switching to larger size tires, underinflated tires will affect fuel consumption. When tire pressure is too low, the increased contact area between tires and road surface creates greater driving resistance, which naturally leads to higher fuel consumption.

3

5

Share

Is the Civic a Dongfeng Honda model?

In China, the Honda Civic is produced by Dongfeng Honda. The Honda Civic available in the Chinese market shares the same production platform with the Dongfeng Honda CR-V, and both vehicles utilize the same chassis. Pros and Cons of the Dongfeng Honda Civic: 1. Exterior: The model features xenon headlights, 17-inch alloy wheels, and Michelin PS3 tires, which are quite rare in its class. 2. Interior: The driver-oriented dashboard, dual-layer instrument cluster, and red engine start button give it a sporty appearance. However, most of the dashboard is made of hard plastic, resulting in average tactile feedback. 3. Multimedia System Experience: It comes with a smart system that can project smartphone content onto the car screen, but the operation is somewhat cumbersome. 4. Passenger Space Experience: Compared to other vehicles in its class, the space measurement data is average. 5. Seats and Comfort: The front seats offer moderate firmness, while the rear seats are softer and more comfortable. A downside is the lack of a headrest in the middle rear seat. 6. Interior Storage Space: The dashboard storage box and cup holders are conveniently placed, but the door panel storage space is relatively small. 7. Trunk Space and Expandability: The opening between the rear seats and the trunk is irregular and small. Even with the rear seats folded down, the surface isn't level, limiting expandability. The trunk lid support rods are covered with plastic casings, enhancing both visual appeal and texture.

20

4

Share

What is the fuel consumption of the 2009 Besturn B50?

The 2009 Besturn B50 is equipped with a 1.6L naturally aspirated engine. The combined fuel consumption for the 1.6L automatic transmission model is 7.8L/100km. Factors affecting fuel consumption: 1. Driving habits: The fuel consumption of a car is closely related to the driver's habits. If the driver frequently engages in aggressive driving, such as rapid acceleration or sudden braking, it will significantly impact the car's fuel consumption. Statistics show that incorrect driving habits can increase fuel consumption by 5-30%. 2. Tire pressure: Fuel consumption is also directly related to tire pressure. For models without a tire pressure monitoring system, many owners tend to overlook the importance of tire pressure. When the tire pressure is either too high or too low, the car's fuel consumption will increase. 3. Road conditions: The road conditions on which the car is driven also affect fuel consumption. If the car frequently travels on poor road surfaces, the engine load increases, leading to higher fuel consumption.

18

4

Share

What is the purpose of the EV switch in hybrid vehicles?

Represents the vehicle's pure electric mode. 1. Function: This button only appears on hybrid vehicles and serves as the power switching button. When the EV button is pressed, the vehicle will operate in pure electric mode, using the vehicle's battery to drive the motor and provide power, while the fuel engine will not operate. 2. Hybrid models: Hybrid models refer to oil-electric hybrid vehicles that combine gasoline or diesel with electric power. Hybrid electric vehicles use an electric motor as an auxiliary power drive system for the engine. Hybrid power consists of two driving modes: gasoline-driven and electric-driven, offering better power performance and lower emissions, making it a new energy vehicle type.

16

0

Share

What does the SET button in a car mean?

Does the ETC have to be registered under the vehicle owner's name?

Does the Lavida have a rear anti-collision beam?

What is the actual fuel consumption of the 2.4L Elysion?

Is the Civic a Dongfeng Honda model?

What is the fuel consumption of the 2009 Besturn B50?

What is the purpose of the EV switch in hybrid vehicles?

What car has three bullet-shaped logos?

How many kilometers can a full tank of fuel last for the Maxus G10?

Where is the hazard warning light on Model 3?

Where are Lynk & Co cars produced?