What does the seek button mean?

What are the methods for cleaning dirt from a car radiator?

Cleaning dirt from a car radiator can be done through the following methods: 1. Use a radiator cleaner to remove dirt, which will turn into powder and suspend in the coolant without clogging the engine's water channels; 2. Manual cleaning, which requires removing the car radiator and using tools like hammers, scrapers, or shovels to remove dirt, being careful to avoid causing secondary damage to the radiator during the process; 3. Use a professional car radiator descaler by pouring it directly into the car's water circulation system and letting it soak. After idling or driving for 20 to 30 minutes, drain the descaler from the radiator and system, then rinse thoroughly with water to effectively remove scale, rust, sludge, and other harmful substances from the engine's water circulation system.

12

0

Share

Can the brake and clutch be pressed together when downshifting?

Yes, they can be pressed together, but attention is needed when pressing them. The clutch pedal can be pressed all the way down directly, but the brake pedal should be pressed gradually. Never press the brake pedal all the way down directly, as this will cause the vehicle to lock up, which can have a certain impact on the vehicle's use. Be sure to pay attention. Below is some information about the brake and clutch: 1. Brake: The brake of a motor vehicle is also called the braking system. The principle of braking is to fix a wheel or disc on the high-speed shaft of the machine and install a corresponding belt or disc on the machine. Under external force, it generates a braking torque. 2. Clutch: The clutch of a motor vehicle is located inside the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output of the clutch is the input shaft of the transmission.

15

2

Share

What is the average fuel consumption of a van?

The average fuel consumption of a van is generally 8L/100km. Additional information: 1. Fuel consumption calculation: Simple fuel consumption calculation: After filling up the tank until the automatic nozzle stops, check how many kilometers you have driven. Subtract 15 liters from 50 liters, then simply calculate the fuel consumption. For example, if you drive 420 kilometers, subtract 15 liters from 50 liters to get 35 liters, then divide by 4.2 to get 8.333. This 8.333 is the rough actual fuel consumption per 100 kilometers. 2. Constant-speed fuel economy (Constant-Speed-Fuel-Economy): Constant-speed fuel economy refers to the fuel efficiency indicator of a car when driving at a constant speed on good road conditions. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. For example, France and Germany use the constant-speed fuel consumption at 90Km/h and 120Km/h as the main evaluation indicators for fuel economy.

6

5

Share

How to Replace the Air Filter Element for the Vezel?

Method for replacing the air filter element of the Vezel: There are 3 clips on the air filter housing. After opening the clips, you can see the air filter element. Pull out the filter element to check the degree of dirt and damage, and clean or replace it as needed. When installing, pay attention to the direction of the air filter element by comparing it with the original one. After completion, check whether the filter box is secure and the sealing condition. The Vezel is the first SUV under GAC Honda, with a body length, width, and height of 4294mm, 1772mm, and 1605mm respectively, and a wheelbase of 2610mm. In terms of appearance, the Vezel features a flying wing front face design, with mysterious and elegant black as the main tone, integrating the grille and the lamp body to highlight a pioneering and compact personality. The LED headlights with dual-lamp design are combined with arc-shaped LED daytime running lights, perfectly unifying elegance and sharpness.

1

2

Share

What is the fault when the ABS light comes on while driving?

When the ABS light comes on in a car, it indicates that the anti-lock braking system may have a malfunction. Relevant information is as follows: 1. Principle: The ABS anti-lock braking system uses sensors installed on the wheels to send signals when the wheels are about to lock up. The controller then instructs the regulator to reduce the hydraulic pressure in the wheel's brake cylinder, decreasing the braking torque. After a certain period, the original hydraulic pressure is restored. This cycle repeats continuously (up to 5~10 times per second), keeping the wheels in a rotating state while providing maximum braking torque. 2. ABS: In cars without ABS, if the brake pedal is pressed hard while driving, the wheel speed will rapidly decrease. When the braking force exceeds the friction between the wheels and the ground, the wheels will lock up. Fully locked wheels reduce the friction between the tires and the ground. If the front wheels lock up, the driver cannot control the vehicle's direction. If the rear wheels lock up, it is very easy for the vehicle to skid sideways.

14

2

Share

What is the sign of engine overheating?

Engine overheating signs: The water temperature pointer on the vehicle dashboard exceeds the red mark, the water temperature warning light will illuminate, and sometimes white smoke may appear in the engine compartment. This indicates that the engine temperature is too high or there is insufficient coolant. It is recommended that the owner check whether the radiator coolant is normal, and whether there are leaks in the radiator, cooling hoses, and various components. The causes of engine overheating include: leaks in the cooling system or insufficient coolant; inaccurate or malfunctioning water temperature gauge; excessive scale in the cooling system, leading to poor heat dissipation; blockage of the radiator guard mesh or radiator core ventilation ducts by debris, resulting in poor heat dissipation; loose or broken water pump or fan belt. Measures to prevent engine overheating: Ensure sufficient coolant; check whether the thermostat is functioning properly. If the thermostat fails to open the main valve promptly as required, it must be replaced immediately. If a replacement cannot be obtained in time, the thermostat can be temporarily removed, but a faulty thermostat should never be left at the water jacket outlet; park the vehicle in a shaded area.

11

0

Share

What does the seek button mean?

What are the methods for cleaning dirt from a car radiator?

Can the brake and clutch be pressed together when downshifting?

What is the average fuel consumption of a van?

How to Replace the Air Filter Element for the Vezel?

What is the fault when the ABS light comes on while driving?

What is the sign of engine overheating?

What is the fuel tank capacity of the Dongfeng Honda CR-V?

What is the reason for water dripping from a vehicle's exhaust pipe?

How to Set the Lock Sound for Tayron?

How Often Should You Change the Oil After Buying a Car?