···
Log in / Register

What to Bring for Subject 3 Driving Test?

1Answers
KennedyAnn
07/29/2025, 05:30:25 PM

For the Subject 3 driving test, you need to bring a valid ID card, your file, and the successful booking confirmation. At the test center, you'll undergo magnetic ID card verification and fingerprint authentication before being allowed to take the test. Key points to note: 1. Verification: If fingerprint verification fails, exit the vehicle to re-register your fingerprints before rejoining the test queue. 2. Distance: After completing all mandatory test items and driving over 3 kilometers as required, the system will automatically prompt you to pull over. Upon hearing the instruction, choose a clear curb (or solid road edge line) along the test route to safely complete the parking maneuver. The system will then announce your test results.

Was this review help?
119
Share
More Q&A

How to Reset the Smart Maintenance Light?

smart maintenance light reset method is: 1. Turn on the ignition switch, press the button on the left side of the instrument panel three times consecutively; 2. Press the confirmation button on the left side of the steering wheel, the instrument will display a maintenance service prompt, then use the plus/minus buttons on the right side of the steering wheel to select "Reset All Services"; 3. Press the confirmation button, the instrument will display "Reset Successful", then turn off the ignition switch to exit. The smart is a microcar from German automaker Mercedes-Benz, with body dimensions of 2695mm in length, 1663mm in width, and 1555mm in height, and a wheelbase of 1873mm. The smart is equipped with front MacPherson and rear torsion beam non-independent suspension, and the brake combination consists of front disc and rear drum brakes.
108
Share

Which Country's Automobile is Byton?

Byton is a Chinese automobile. Here is a detailed introduction about Byton: 1. Byton's global headquarters is located in Nanjing, with its design center in Munich, Germany. 2. Byton's cutting-edge autonomous driving technology headquarters is established in Silicon Valley, USA, where continuous optimization of its intelligent terminals is conducted. 3. As a new concept vehicle, Byton is undergoing its second round of financing, with the company having a presence in various locations. 4. Byton launched its first mass-produced model, the BYTON M-Byte, in mid-2019. Currently, this model is not officially available for sale in China. In terms of appearance, this vehicle is indeed eye-catching, featuring a closed front face intersected by an LED light strip, with a glowing brand logo in the center, giving the overall design a strong sense of technology.
103
Share

How often should the Octavia's cabin air filter be replaced?

The Octavia's cabin air filter should be replaced every 25,000 kilometers or 36 months. Here is more information about automotive cabin air filters: 1. The replacement interval for cabin air filters is clearly specified in the maintenance manual, typically every 10,000 to 20,000 kilometers or every 1 to 2 years. This can be slightly adjusted based on driving conditions and habits. 2. The function of the cabin air filter is to filter and absorb various particulate matter, dust, and harmful substances from the outside air, providing a better environment for vehicle occupants. 3. Over time, the cabin air filter itself becomes contaminated. If not replaced regularly, it can become clogged and breed bacteria, which may then enter the vehicle through the ventilation system, posing health risks.
115
Share

What Are the Symptoms of a Bad Engine Mount?

Engine mount failure primarily manifests as noise during vehicle startup. Below is a detailed introduction to automotive engine mounts: 1. Overview: An engine mount is a cushioning component that connects the engine to the vehicle frame. Most are made of rubber, while a minority use hydraulic components. Typically, engine mounts can last over 6 years without a defined replacement interval. However, they must be replaced immediately when showing signs of cracking, aging, or corrosion. 2. Function: The primary purpose of engine mounts is to reduce engine vibration transmission to the chassis. The rubber elements in engine mounts absorb resonance generated during engine operation. Some mounts also feature hydraulic pressure reduction capabilities. When damaged, engine vibration will propagate throughout the entire vehicle body.
105
Share

Why Does a Car Need Wheel Alignment?

The reasons for performing wheel alignment on a car include: 1. Wheel alignment is directly related to the stability of the chassis. Any abnormalities can affect the overall safety index of the vehicle; 2. Wheel alignment helps reduce wear and tear on tires, steering mechanisms, and suspensions, thereby extending their service life; 3. Performing wheel alignment can also enhance driving stability and improve road safety; 5. Wheel alignment can help reduce fuel consumption. Situations where a car requires wheel alignment include: 1. After replacing new tires or following collision damage repairs; 2. Uneven wear on the front or rear tires on one side; 3. The steering wheel feels too heavy or floats and shakes while driving; 4. The car pulls to the left or right when driving straight.
109
Share

Where is the car trunk button located?

The location of the car trunk button varies depending on the vehicle model, typically found on the left side of the steering wheel or in the central control area. To open the trunk, simply press the button inside the car or use the remote key, and the trunk will open automatically. To close the trunk, press the close button inside the trunk, the close button inside the car, or use the remote key, and the trunk will close automatically. Precautions for using the trunk: 1. Arrange items according to the principle of placing large items at the bottom and small items on top, with heavy items in the front and light items at the back; 2. During vehicle operation, the trunk lid should always remain fully closed; 3. When closing the trunk lid, ensure there are no children or obstacles inside that could hinder the closing process.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.