What does the 'R' on tires mean?

What are the reasons for a manual transmission not engaging into gear?

Manual transmission not engaging into gear can be caused by: 1. The clutch not being fully depressed or the driver not shifting the gear properly; 2. Malfunction of the shift solenoid valve or friction plates. A manual transmission uses a hand-operated gear lever to change the gear engagement and transmission ratio inside the gearbox, thereby achieving the purpose of shifting gears. The method to start a manual transmission car is: 1. Fully depress the clutch; 2. Shift into first gear; 3. Turn on the left turn signal; 4. Sound the horn as a reminder; 5. Release the handbrake; 6. Gently lift the clutch with the left foot; 7. Start the vehicle and drive on the road. A manual transmission car uses a manual shift mechanical gearbox to adjust the vehicle speed, meaning the gear lever must be manually operated to change the gear engagement position inside the gearbox, altering the transmission ratio to achieve the purpose of shifting gears.

12

4

Share

Where are the reference points on the hood for Subject 2?

Subject 2 hood reference points are generally located at the 1/3 position on the left side of the front hood. Related introduction: 1. Overview: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination and refers to the field driving skills test. The C1/C2 license test items include five mandatory tests: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-turns). Some regions may include a sixth item, high-speed toll collection. 2. Expansion: For large vehicles (A1, A2, A3, B1, B2), the test items include pole test, stopping and starting on a slope, parallel parking, driving over a single-plank bridge, curve driving, right-angle turns, passing through a narrow gate, navigating continuous obstacles, driving on bumpy roads, U-turns on narrow roads, as well as simulated scenarios such as highways, continuous sharp mountain curves, tunnels, rain (fog) conditions, slippery roads, and emergency handling.

3

5

Share

How to Download Songs to the Car?

To download songs in the car, the vehicle must support downloading music software on the central control display. If music software cannot be downloaded, it is not possible to download songs directly in the car. If downloading music software is supported, turn on the mobile hotspot, connect to it directly, open the software, and proceed with the download. Below are specific methods for playing music in the car: 1. CD: Go to an audio store, purchase some CDs, insert them into the car's central control, and play. 2. Car Bluetooth: Connect your phone via car Bluetooth and play. 3. Built-in AUX interface: Connect your phone directly and play. 4. Car USB port: Play music via a connected USB drive. Purchase a USB drive, connect it to a computer, download songs onto the drive, then insert the USB into the car's USB port to play. One important note: Most car models support the MP3 format, while many do not support other formats. Therefore, ensure to download music in MP3 format.

9

5

Share

How to shift gears smoothly without noise in FAW J6P?

You should fully depress the clutch pedal and ensure the engine RPM matches the vehicle speed. Here are detailed explanations about the clutch: 1. Function of clutch: Manual transmission vehicles are all equipped with clutches, which are crucial components in the drivetrain system located between the engine and transmission. When the clutch pedal is depressed, the clutch disengages; when released, it engages. During gear shifting, you must quickly depress the clutch pedal completely to ensure smooth shifting. The selected gear should match the engine RPM and driving speed, otherwise difficulty in engaging gears may occur. When downshifting, using the rev-matching technique can prevent jerking after shifting. 2. Regular replacement of clutch disc: The clutch disc wears with increasing mileage. When worn, slipping may occur. To replace the clutch disc, the connection between engine and transmission must be disassembled. Maintaining good driving habits can extend the clutch disc's service life. When not using the clutch, avoid resting your left foot on the pedal as this accelerates release bearing wear and may cause clutch slippage. Slipping will rapidly increase clutch disc wear.

3

1

Share

How often does the Wuling double-row need inspection?

The Wuling double-row mini-truck requires an annual inspection within the first 10 years, and a semi-annual inspection after exceeding 10 years. Below are the contents of the vehicle annual inspection: 1. Check the engine, chassis, and body: including whether the attached equipment is clean, complete, and effective, whether the paint surface is uniform and aesthetically pleasing, whether the main assemblies have been replaced, and whether they match the initial inspection records. 2. Test the vehicle's braking performance, steering control, lights, exhaust: and whether other safety performance meets the requirements of the 'Technical Conditions for Safe Operation of Motor Vehicles'. 3. Inspect the vehicle: whether it has been modified, remodeled, or altered, whether the driving license, license plate, and vehicle file records match the current vehicle condition, and whether approval and change procedures have been completed. 4. License plate and driving license: check for damage, tampering, or unclear printing of the enlarged license plate characters on the vehicle, and whether replacement is needed.

20

1

Share

How to Renew a Driver's License After 6 Years?

You can renew your driver's license within 90 days before its expiration after 6 years. The required documents for renewal include ID card, driver's license, medical examination certificate, photos, etc. Below are the steps for renewal: 1. Fill out the form: You should complete the 'Motor Vehicle Driver's License Application Form' and submit a medical condition certificate issued by a county-level or military regiment-level medical institution. 2. Undergo a medical examination: Within 90 days before the driver's license expires, apply for renewal at the vehicle management office where the license was originally issued. When applying for renewal, prepare the original and a copy of your ID card, driver's license, and any driver's license processing point will have doctors stationed by 'county-level or above medical institutions' who can conduct the medical examination on-site and fill out the 'Motor Vehicle Driver's Physical Condition Certificate'. 3. Remember to prepare photos: Bring 3 recent color front-facing half-inch photos with a white background, without hats, and with the head occupying two-thirds of the photo length.

16

5

Share

What does the 'R' on tires mean?

What are the reasons for a manual transmission not engaging into gear?

Where are the reference points on the hood for Subject 2?

How to Download Songs to the Car?

How to shift gears smoothly without noise in FAW J6P?

How often does the Wuling double-row need inspection?

How to Renew a Driver's License After 6 Years?

How to Replace a Lost Car Electric Key?

What License is Required to Tow a Travel Trailer?

How to Solve the Problem of Increased Engine Noise?

What are the preparation rules before Subject 2 test?