What does the PS light on a Nissan car mean?

1 Answers
LaCarmen
07/30/25 10:36am
Nissan Tiida's PS indicator light indicates that the car's power steering system is low on power steering fluid, which can cause the power steering to malfunction and affect the vehicle's safety. More information about power steering fluid is as follows: 1. Power steering fluid: It is a special liquid used in the car's power steering pump. Through hydraulic action, it can make the steering wheel very light, similar to automatic transmission fluid, brake fluid, and shock absorber fluid. 1. Time to replace power steering fluid: Generally, car manufacturers do not strictly specify the replacement cycle for power steering fluid. Most car maintenance and repair shops will refer to other service companies in the industry, learning from each other's strengths. Some more standardized companies will refer to the car maintenance requirements of foreign car companies and make more reasonable regulations based on factors such as China's current road conditions, air quality, and the technical level of users.
Was this review help?
5
3
Share
More Forum Discussions

How to Open a Car Fuel Tank Cap?

Method to open a car fuel tank cap: The fuel tank cap of a car is divided into an inner cap and an outer cap. The outer cap is controlled by an electronic control line, and some require a key to open. The electronic control button or pull rod is usually located on either side of the driver's seat, marked with a fuel pump symbol. Simply press or pull to open it automatically. The inner cap is only visible after opening the outer cap; turning it to the right tightens it, and turning it to the left opens it. The fuel tank cap refers to the square-shaped, stainless steel container on a car used for storing gasoline, with excellent sealing. It has only a small circular opening, about the size of a bottle cap, for easy storage. It is generally located at the rear of the car.
4
3
Share

What is the fuel tank capacity of the eighth-generation Civic?

The fuel tank capacity of the eighth-generation Civic is 50 liters. In addition to storing fuel, the fuel tank in the hydraulic system also plays roles in heat dissipation, separating air bubbles from the oil, and settling impurities. Try not to wait until the fuel warning light comes on before refueling. When the light comes on, it indicates that the fuel level is already below the fuel pump. If you always wait until the light comes on before refueling, it will shorten the service life of the fuel pump. The Civic adopts front-wheel drive and is equipped with a water-cooled, four-stroke, inline four-cylinder engine with a maximum power of 104 kW and a torque of 174 Nm. The front suspension is a MacPherson independent suspension, and the rear suspension is a double-wishbone independent suspension. In terms of safety, the Civic is equipped with side airbags, a visual reverse parking system, child safety seat anchors, and the ECON intelligent green assist system.
1
1
Share

What should be paid attention to when parking for a long time?

When parking for a long time, you should pay attention to: 1. Prevent metal rust: For cars that are parked for a long time, the metal surface should be kept clean, and dust, dirt, and moisture on the car should be removed in time. The parts and surfaces that are prone to rust should be coated with engine oil, grease, or wrapped with oil paper; 2. Prevent aging and deterioration of rubber products: Long-term parked vehicles should avoid direct sunlight and contact with mineral oil; 3. Check the cotton and linen products on the car frequently, air them in time, and keep them dry; 4. The fuel tank should be tightly sealed, and avoid excessive temperature. The storage time of gasoline should not be too long; 5. Check the working condition of the engine frequently, start the engine at least once a month, let it idle for 4 to 5 minutes, and check the operation of the engine.
5
2
Share

How to Reverse Park into a Parking Space in Daily Life?

Here are the steps for daily reverse parking: 1. Keep the car body about 30 centimeters away from the dotted line to facilitate reversing into the space; 2. Adjust the seat, fasten the seat belt, shift into reverse gear, and the car will start moving backward; 3. Observe the right rearview mirror, and when the left front corner of the yellow line of the parking space disappears, turn the steering wheel fully to the right; 4. Observe the left mirror, and when you see the opposite corner of the parking space, straighten the steering wheel; 5. Observe the right mirror, and when the right rear wheel enters the parking space, turn the steering wheel fully to the left. Precautions for reverse parking: 1. When driving to the starting position, ensure the car body is at an appropriate distance from the line, pressing the white line at the front right of the parking space but not exceeding it; 2. When reversing, make sure to align with the reference points and turn the steering wheel fully; 3. Once the car is in the space, ensure it is straight and the steering wheel is centered, avoiding any unnecessary turns.
4
5
Share

How often should brake shoes be replaced in drum brakes?

Drum brakes require brake shoe replacement every 30,000 to 40,000 kilometers. A drum brake system consists of rotating components, stationary components, actuating components, and positioning adjustment devices. It is composed of a brake backing plate, wheel cylinder, brake shoes, related linkages, springs, pins, and the brake drum, and is commonly used for rear wheels. The method for replacing drum brake shoes is as follows: 1. Remove the tire and tap the surface of the brake drum with a hammer; 2. Insert a flat-head screwdriver into the gap of the spring and pry upwards with force to remove the return spring; 3. Use pliers to remove the fixing bolt of the brake shoe, and the brake shoe will automatically fall off the brake assembly. Remove the brake shoe; 4. Detach the locating pin from the old brake shoe and install it on the new brake shoe.
5
5
Share

Can modified car interiors pass the annual inspection?

Modified car interiors can pass the annual inspection if they do not affect safe driving. However, if they impact safe driving, they will not pass. The annual inspection is an event every car owner will encounter, where professional staff and equipment are responsible for inspecting the vehicle. Car interiors mainly refer to the automotive products used for internal modifications. Car interiors cover various aspects of the vehicle's interior, such as steering wheel covers, seat cushions, floor mats, car perfumes, hanging accessories, interior decorations, and storage boxes—all of which are car interior products. Car interior components not only serve decorative purposes but also involve rich functionality, safety, and engineering attributes.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.