What does the P0700 alarm mean?

1 Answers
TylerDella
07/29/25 8:55pm
P0700 is a fault code stored by the engine control module. The appearance of this code generally indicates a problem with the transmission. Below is relevant information about P0700: 1. Simple fault: The transmission computer control module or a certain solenoid valve has an issue. 2. Severe fault: Internal mechanical components of the transmission are damaged. 3. Solution: Use a decoder to enter the transmission control module for diagnosis, which can display detailed fault codes, followed by repairs. (The P0700 fault code applies to all car manufacturers and means Transmission-Control System (MIL-Request) fault (fault indicator light request)).
Was this review help?
17
4
Share
More Forum Discussions

How many points will be deducted for a 7-seater car carrying 9 people?

A 7-seater car carrying 9 people is considered overloading behavior and will result in a penalty of 6 points. Driving a commercial passenger vehicle with more than 20% over the approved capacity will result in 12 points deducted at once; driving a commercial passenger vehicle with less than 20% over the approved capacity, or driving other passenger vehicles with more than 20% over the approved capacity, will result in 6 points deducted at once. Driving passenger vehicles other than commercial passenger vehicles and school buses with less than 20% over the approved capacity will result in 3 points deducted at once. Hazards of overloading: Vehicle overloading severely damages road infrastructure. Since the load of overloaded vehicles far exceeds the design load of roads and bridges, it leads to pavement damage, bridge fractures, and significantly shortens the service life. Overloaded vehicles have increased mass and inertia, longer braking distances, and higher risks. Severe overloading may cause tire blowouts, sudden deviation, brake failure, rollovers, and other accidents due to excessive tire load and deformation. Additionally, overloading affects the vehicle's steering performance, making it prone to accidents due to loss of steering control. Drivers operating overloaded vehicles often experience increased psychological stress and mental pressure, leading to operational errors, affecting driving safety, and causing traffic accidents. Overloaded vehicles cannot maintain normal speeds, occupying lanes for extended periods, directly affecting road traffic flow.
3
5
Share

What to Do When There's Oil on the Spark Plug?

If there is oil on the spark plug, it needs to be replaced with a new one. Steps to replace the spark plug: Open the hood, lift the plastic cover of the engine, remove the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage ignition wires according to the firing order, and secure the cover. Methods to determine if the spark plug is damaged: Remove the spark plug and observe its appearance. A normal spark plug's insulator skirt and electrodes should appear gray-white, gray-yellow, or light brown. A properly functioning spark plug will have a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug is contaminated with oil or deposits but not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, showing signs like blistering, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates the wrong heat range was selected or the air-fuel mixture is too rich, causing oil to rise.
15
4
Share

What causes high engine temperature in Ford Focus?

High engine temperature in Ford Focus is generally caused by a malfunctioning temperature controller, issues with the thermostat, or blockages in the cooling circulation system. Below are relevant details: 1. Ford: Ford is a world-renowned automobile brand, one of the many brands under the American Ford Motor Company. The company and brand name "Ford" originates from the surname of its founder, Henry Ford. 2. Notes: High engine temperature is a normal phenomenon as long as the engine coolant is sufficient.
12
3
Share

Does the 2016 Qashqai have ESP?

Qashqai 2016 comes standard with ESP across all models. Here is an introduction to the ESP system: 1. Maintains vehicle stability: ESP, or Electronic Stability Program, helps the vehicle maintain optimal stability under various conditions, with particularly noticeable effects in cases of oversteering or understeering. 2. Related control: ESP primarily controls the longitudinal and lateral stability of the vehicle, ensuring it follows the driver's intended path. 3. Function: When the tires are about to lock up during braking, the Electronic Stability Program performs high-frequency braking in the form of mechanical point braking within one second, allowing the vehicle to maintain steering control via the steering wheel even during full braking.
14
2
Share

What is the fuel consumption of the Infiniti Q50L?

Infiniti Q50L has an average fuel consumption of 11.2 liters per 100 kilometers. Here are the relevant details: 1. Body dimensions: It is a medium-sized SUV with body dimensions of length 4867mm, width 1823mm, height 1456mm, a wheelbase of 2898mm, and a curb weight of 1678kg. 2. Vehicle configuration: The Infiniti QX50 is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 245PS, maximum torque of 380Nm, maximum power of 180kW, front suspension of independent double-wishbone type, and rear suspension of multi-link independent type.
11
4
Share

How to Transfer Vehicle Registration for Used Cars Across Different Locations?

Methods for transferring vehicle registration of used cars across different locations are as follows: 1. Required documents: ID card, vehicle registration certificate, the vehicle to be inspected, and driving license. 2. Handling violations: Before submitting the application, all traffic violations and accidents should be settled. 3. Time limit: If the vehicle has exceeded the inspection validity period, the traffic accident liability insurance certificate should also be reviewed. For vehicles not eligible for the 6-year exemption from inspection, the motor vehicle safety technical inspection certificate should also be examined. 4. Proof: If the vehicle is co-owned by more than one person (e.g., jointly owned by a couple), a notarized certificate proving joint ownership should be submitted. For couples, a Marriage Certificate or Household Register proving the marital relationship can be provided.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.