···
Log in / Register

What does 'Please check TPMS' mean?

5 Answers
Myrtle
07/29/2025, 08:43 AM

Please check TPMS means to check the Tire Pressure Monitoring System. If the dashboard displays 'Please check TPMS system', it may indicate abnormal tire pressure or a sensor malfunction. Before long-distance or high-speed driving, always check your tire pressure and inspect the tire surface for visible damage. Tires are the only components of a vehicle that contact the road surface, making them crucial for driving stability and safety. Tire pressure should neither be too high nor too low. Insufficient pressure during high-speed driving can cause wave-like deformation of the tires, increasing the risk of a blowout. Excessive tire pressure reduces the contact area between the tire and the road, negatively affecting vehicle handling and driving stability.

Was this review help?
19
0
Share
McRuby
08/13/2025, 08:54 PM

TPMS stands for Tire Pressure Monitoring System, simply put, it's a tool used by cars to monitor tire pressure. From my over ten years of driving experience, it's super critical. For instance, once on the highway, a tire icon lit up on the dashboard, but I didn't pay attention. Minutes later, the tire suddenly went flat, nearly causing an accident. Since then, I've been particularly mindful of this system. It has built-in sensors on the wheels that monitor pressure in real-time, alerting you to inflate or check if the pressure falls below the normal range. This helps avoid blowouts, reduces tire wear, and even saves some fuel costs since insufficient pressure increases resistance and wastes fuel. Paying a bit more attention to the dashboard and taking simple actions can significantly enhance safety.

Was this review help?
15
4
Share
Expand All
KadenFitz
10/09/2025, 01:29 AM

TPMS stands for Tire Pressure Monitoring System, which I think is quite important for parents who shuttle their kids to and from school every day. With two kids of my own, I always worry about safety when driving them around, and this system acts like a safety guard, monitoring tire pressure in real time. Low tire pressure can lead to unstable handling and accelerated wear, and a potential blowout could have serious consequences. TPMS uses sensors to trigger a warning light in the car when pressure drops below a certain threshold, making it simple and intuitive. In many places, this feature is a legally mandated standard configuration to ensure road safety for everyone. After checking the manual, I've developed the habit of regularly checking the warning system.

Was this review help?
15
3
Share
Expand All
DelKeira
11/22/2025, 01:45 AM

TPMS stands for Tire Pressure Monitoring System, which is a standard feature in most new vehicles. It uses sensors to monitor tire pressure in real-time and illuminates a warning light when the pressure is too low, prompting you to inflate the tires. The advantage is that it eliminates the need to stop and manually check the tire pressure, saving time and effort. Additionally, it helps prevent tire blowouts, enhancing safety. It is recommended to respond to the warning promptly and not wait too long.

Was this review help?
18
1
Share
Expand All
BlakelyAnn
01/12/2026, 03:21 AM

TPMS stands for Tire Pressure Monitoring System. From a user's perspective, it can help you save money and worry less. When functioning properly, it reduces tire wear and extends lifespan, while also saving about 10% in fuel consumption due to stabilized tire pressure and reduced resistance. However, if low pressure isn't addressed promptly, it accelerates tire wear and increases accident risks. The system typically alerts with a yellow dashboard warning light. Direct and indirect sensors each have pros and cons: direct sensors are more accurate but their batteries may need replacement after a few years at a cost of around 100-200 RMB. Therefore, pay attention to maintenance and don't ignore minor issues.

Was this review help?
13
4
Share
Expand All
More Forum Discussions

Does gasoline evaporate in hot weather?

Gasoline evaporates regardless of whether it's cold or hot, but it evaporates faster in hot weather compared to cold weather. Here is some relevant information about gasoline: 1. Gasoline octane rating: The octane rating represents the anti-knock property. A higher octane number indicates better anti-knock performance, but it has no relation to the quality of the gasoline itself. A higher octane rating does not mean the gasoline has fewer impurities. 2. Unleaded gasoline: The common unleaded gasoline available in the market includes 90, 93, and 97 octane. In major cities, Sinopec also supplies high-clean 90, 93, and 97 octane unleaded gasoline, which not only has lower lead content but also contains small amounts of additives to clean the fuel system.
12
4
Share

What is the original tire brand of the Fit?

The original tire brand of the Fit is Bridgestone, with a tire specification of 185/60r15. Taking the 2020 Fit as an example, it belongs to the compact car category, with body dimensions of: length 4109mm, width 1694mm, height 1537mm, a wheelbase of 2530mm, a fuel tank capacity of 40 liters, and a curb weight of 1088kg. The 2020 Fit features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, producing a maximum horsepower of 131ps, a maximum power of 96kW, and a maximum torque of 155Nm, paired with a continuously variable transmission.
1
5
Share

Why does the clutch not make noise when cold but does when hot?

Clutch not making noise when cold but making noise when hot is because the engine lacks oil. The following is an introduction to engine-related content: 1. Energy conversion: An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, an internal combustion engine usually converts chemical energy into mechanical energy. 2. Device: An engine can refer to both a power-generating device and the entire machine including the power device (e.g., gasoline engine, aircraft engine). The engine was first developed in the UK, so the concept of the engine also originates from English, and its original meaning refers to "a mechanical device that generates power."
2
4
Share

What can completely remove engine oil from hands?

Here are methods to remove engine oil from hands: 1. Method 1: Engine oil is a mixture of several alkanes and is an organic substance. According to the principle of 'like dissolves like', organic substances can be used to dissolve engine oil. However, it's best to choose an organic substance that is also soluble in water to avoid secondary pollution. 2. Method 2: The most convenient option is to use alcohol, which can dissolve both organic solvents and water. The higher the alcohol concentration, the better, with anhydrous alcohol being the best. Alcohol can be purchased at pharmacies or chemical stores. 3. Method 3: If the stain is oily and doesn't absorb water, 'fight oil with oil'—use a soft cloth or cotton swab dipped in gasoline to wipe, allowing the oily substance to dissolve in the gasoline and then transfer to the cloth.
17
5
Share

Why Does Fuel Consumption Increase When Braking?

When the speed of the vehicle changes, accelerating from low to high speed by pressing the accelerator pedal hard will lead to an increase in fuel consumption. Here are the related explanations: 1. From stationary to acceleration: A car requires a significant amount of energy to accelerate from a standstill, which essentially means burning more gasoline. This is especially more wasteful for automatic transmission cars because the automatic transmission has a reaction process, making power delivery slower. Compared to manual cars, achieving the same speed consumes more gasoline. 2. Air resistance: Air resistance is proportional to the square of the speed. This means that when the speed increases from 40 km/h to 80 km/h, air resistance increases accordingly, leading to higher fuel consumption.
17
5
Share

What is the displacement of the Arrizo M7?

The displacement of the Arrizo M7 is 1.8L and 2.0L. Displacement refers to the volume of fluid inhaled or discharged per stroke or cycle. Taking the 2015 Arrizo M7 as an example, it belongs to the MPV category, with body dimensions of: length 4730mm, width 1823mm, height 1590mm, wheelbase of 2800mm, fuel tank capacity of 62L, and curb weight of 1565kg. The 2015 Arrizo M7 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.8L naturally aspirated engine, delivering a maximum horsepower of 132PS, maximum power of 97kW, maximum torque of 170Nm, and is paired with a 5-speed manual transmission.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.