···
Log in / Register

What does 'Please check the emission system' mean for GAC Trumpchi?

6Answers
SiennaLynn
08/30/2025, 11:16:49 PM

Emission system malfunction requires cleaning the throttle body at a repair shop or 4S store. Below are relevant introductions about automotive emission systems: 1. Introduction: The automotive exhaust system primarily discharges waste gases from engine operation while reducing exhaust pollution and noise. Mainly used for light vehicles, compact cars, buses, motorcycles and other motor vehicles. The automotive exhaust system refers to the system that collects and discharges exhaust gases, generally composed of exhaust manifold, exhaust pipe, catalytic converter, exhaust temperature sensor, automotive muffler and exhaust tailpipe. 2. Emission system failure: Should inspect spark plugs and ignition wires. Whether the spark plug gap meets original technical standards, whether the resistance value of ignition wires complies with technical requirements. Adjustments or replacements are needed if not compliant.

Was this review help?
115
Share
OAdam
09/12/2025, 02:41:48 AM

Last time I drove a GAC car, I also encountered this warning. 'Check Emission System' usually means the vehicle's exhaust control system has detected an abnormality, such as potential faults in components like the oxygen sensor or catalytic converter. Why does this happen? The emission system is designed to reduce pollutant discharge. If it malfunctions, exhaust emissions may exceed standards, which is bad for the environment and can also increase fuel consumption. In my case, it was a loose sensor connector. I took it to the 4S shop where they ran a computer diagnostic and fixed it. Don't underestimate this issue—ignoring it could lead to the engine light coming on and more expensive repairs. Just keep the system clean and perform regular maintenance during daily driving.

Was this review help?
2
Share
Expand All
MirandaLee
10/26/2025, 03:32:18 AM

From a technical perspective, the 'Check Emission System' warning indicates that the vehicle's OBD system has detected an issue with emission components. GAC Motor uses the ECU to monitor exhaust control systems. Abnormal sensor signals or excessive emissions may trigger this alert. If not addressed promptly, minor consequences include ineffective exhaust purification, while severe cases may lead to environmental pollution or increased repair costs. It is recommended to immediately use a diagnostic tool to read the fault codes and identify the cause. Common issues include aging oxygen sensors or clogged catalytic converters. Visiting a professional repair shop for inspection can resolve the problem with minimal expense, preventing more serious complications.

Was this review help?
17
Share
Expand All
MacDante
12/09/2025, 02:50:34 AM

Don't panic when you see this alert. Simply put, it indicates an issue with the emission system that requires prompt inspection. This GAC Motor alert notifies users of improper exhaust control, which may lead to environmental pollution or degraded vehicle performance. I recommend checking the trouble codes with your phone after parking, or taking it directly to a service center for diagnosis. Ignoring it carries significant risks.

Was this review help?
6
Share
Expand All
LeRemington
12/09/2025, 02:52:10 AM

This warning is truly concerning. 'Please Check Emission System' indicates an abnormal operation of the emission control system, possibly involving a malfunction in the exhaust purification device. If left unrepaired for an extended period, excessive exhaust emissions will increase air pollution and also affect engine efficiency. If you encounter this issue while driving a Trumpchi vehicle, immediately reduce speed, pull over, and seek assistance from a professional technician.

Was this review help?
1
Share
Expand All
DelilahDella
01/29/2026, 09:09:14 PM

Seeing this warning means the emission system requires diagnosis. GAC Motor designed this feature for environmental protection. If components like sensors or catalytic converters fail, the warning will appear. It's advisable to promptly visit an authorized 4S dealership for inspection, as they can quickly identify the issue. Regular use of clean fuel can help prevent such minor faults.

Was this review help?
20
Share
Expand All
More Q&A

How to Identify Tire Specifications?

Here is an introduction to the methods for identifying tire specifications: 1. Most tire model markings look like: 205/55R16, and the meanings of these numbers are: (1) 205 indicates the tire section width, the unit is mm, generally the width of the tire is between 145—285mm, with intervals of 10mm. (2) 55 is the aspect ratio, which is the ratio of the tire sidewall height to the tire section width. (3) R indicates that the tire has a radial structure, and 16 is the outer diameter of the wheel, the unit is inches. 2. Letters or symbols with other special meanings: (1) "X" indicates a high-pressure tire. (2) "C" indicates a reinforced type. (3) "B" indicates a bias-ply tire. (4) "—" indicates a low-pressure tire. (5) M and S are abbreviations for Mud and Snow in English, indicating that this type of tire is suitable for use on snowy, icy, and muddy roads. 3. Some tires have arrows or the word OUTERSIDE marked on the sidewall, indicating the rotation direction of the tire.
117
Share

What are the differences between Toyota Vios and Vios FS?

Vios and Vios FS are both models under FAW Toyota, with the main differences as follows: 1. Different body structures. The Vios has a four-door, five-seater sedan body structure; the Vios FS has a five-door, five-seater hatchback body structure. 2. Different body dimensions. The Vios body dimensions are length × width × height (mm): 4420 × 1700 × 1490; the Vios FS body dimensions are length × width × height (mm): 4140 × 1700 × 1485 for the 1.3L manual version, and 4140 × 1700 × 1495 for the 1.3L automatic and 1.5L versions. 3. Different curb weights. The Vios has a curb weight of 1055Kg; the Vios FS has a curb weight of 1070Kg.
104
Share

Does the Teana have a hybrid version?

Nissan Teana is the only model among the top three that does not offer a hybrid version, although the high-end configuration provides a 2.0T engine option. Here is some extended information about the Nissan Teana: 1. Exterior: The new Teana fully adopts Nissan's V-Motion design language, with V-shaped wind lines visible throughout. The silver trim on the grille is the most distinctive and attractive part, while the hood's opening lines incorporate elements inspired by the GT-R, and the headlights also feature a sharp V-shaped design. The side profile uses a three-waistline design, with the middle waistline slanting downward in a diving motion and connecting the front and rear door handles, resulting in a lower position for the front door handle. 2. Interior: It follows a typical Japanese style—simple and practical but not particularly luxurious or refined. The steering wheel has a flat-bottom design, aligning with a youthful and sporty positioning. The central control screen adopts a popular standalone design, though the two knobs occupy significant space, making the screen appear smaller. The air conditioning section is also very minimalistic, giving the entire dashboard a somewhat empty feel. The gear shift area only has a push-to-start button, as the parking brake is located near the left foot. 3. Powertrain: It offers two versions—a 2.0L naturally aspirated engine and a turbocharged variant. However, the horsepower difference between the two versions is a staggering 93 hp, almost equivalent to the power output of a 1.6L naturally aspirated engine. This results in vastly different performance between the two versions. The naturally aspirated version is adequate for daily use but lacks surplus power, making overtaking or high-speed driving more challenging. In contrast, the turbocharged version can even be driven like a performance car, boasting the best power output among the three major Japanese B-segment sedans.
119
Share

What material is the spark plug of the Haval H6 made of?

Haval H6's original spark plug uses the Champion RC8PYCBX single platinum model. Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. The following standards can be referenced for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, remove the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris such as leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage ignition wires according to the firing order, and then secure the cover.
118
Share

What does 'steer towards the narrower side when reversing into a parking space' mean?

Taking left-side reversing as an example, if you notice that the distance between your car and the left edge of the parking space is too large, you should steer to the left. Conversely, if the distance to the left edge appears too narrow, you need to immediately steer to the right and straighten the wheels promptly to successfully park the car. For right-side reversing, you should observe the right rearview mirror to monitor the distance between your car body and the right edge of the parking space during the process. There are three most common types of reversing maneuvers: 1. "Non-character style" parallel parking: In this method, your vehicle should be perpendicular to the target parking space. Using your car's B-pillar as a reference point against the first parking space, you can generally reverse into the third space. This method is particularly suitable for novice drivers, as most driving school students find it relatively common and easier to learn. 2. "Linear style" parallel parking: This involves using the car in front as a reference. Align your car body, turn the steering wheel to the right, and when the angle between the two cars reaches 45 degrees, observe and straighten the wheel while reversing. If estimated correctly, you can complete the parking in one go. This method often requires occupying part of the driving lane and is about as challenging as the non-character style. 3. "Diagonal line style" parking: These two reversing methods usually require one to two training sessions for driving school students to master proficiently. Of course, there are also some less common diagonal or irregular parking scenarios.
118
Share

What is the minimum ground clearance of the Audi A3?

The minimum ground clearance of the Audi A3 is 118 millimeters. The minimum ground clearance of the Audi A3 refers to the distance between the lowest point (excluding the wheels) and the supporting surface, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance for the Audi A3 improves its off-road capability, but if the ground clearance is too high, the stability during high-speed driving will decrease. The A3 was the pioneer among luxury brands to venture into the compact car segment. In 1996, Volkswagen used the PQ34 platform of the Golf to develop this three-door version of the Audi sports car. The dimensions of the Audi A3 are 4554 mm in length, 1814 mm in width, and 1429 mm in height, with a wheelbase of 2680 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while that of SUVs ranges between 200 mm and 250 mm. However, the ground clearance of the Audi A3 is not static; this data also depends on the load condition, so changes in ground clearance should be considered based on the variation in the Audi A3's load. When selecting a vehicle, ground clearance can be one of the reference factors. The specific choice depends on the vehicle's purpose and the road conditions. Generally, in urban areas with good road surfaces, a vehicle with lower ground clearance can be chosen to enhance stability and comfort. If you frequently travel to remote areas or drive on poor road conditions, considering the vehicle's off-road performance, a vehicle with higher ground clearance can be selected to avoid scraping or damaging the chassis.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.