What does odotrip mean on a car?

2 Answers
DelDavid
07/24/25 3:48am
Odotrip on a car refers to the total driving distance of the vehicle, while trip refers to the short-distance driving of the car, which can also be called a subtotal trip. Its main function is to calculate the mileage of the vehicle during each trip. The total mileage data of odo cannot be reset, and car owners rely on this data to remind them of the vehicle's maintenance period. Trip can be used to calculate the vehicle's fuel consumption. When filling up the tank for the first time, the trip mileage is reset to zero, and then the vehicle continues to run normally. The mileage driven after refueling is the amount of fuel needed for the next refill, which is equivalent to dividing the amount of the second refueling by the mileage driven after the first refueling to obtain the actual fuel consumption. The car dashboard is a device that reflects the working conditions of various systems of the vehicle. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. The car dashboard can reflect the status of various systems of the vehicle, and abnormalities on the dashboard can help identify potential faults in the vehicle.
Was this review help?
1
2
Share
VonMarley
08/10/25 11:22pm
I've been driving for over a decade, and every time I start the car, I glance at that TRIP indicator—it's essentially a trip meter. Usually located on the dashboard, it shows the distance traveled during the current drive, unlike the permanent record of the total mileage (ODO). You can reset it anytime, like pressing it before heading out, then checking how far you've gone upon returning home. It's incredibly handy, especially for calculating fuel consumption after refueling. I've noticed many experienced drivers love using this feature; it helps remind you not to speed or drive fatigued, as the numbers are right there. It’s also good to keep an eye on the dashboard’s response—if the TRIP stops updating, there might be an issue with the wiring or buttons, so it’s wise to visit a repair shop to avoid compromising driving safety.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

What is the purpose of a car reading light?

The function of the interior reading light is to provide illumination inside the vehicle. When there is insufficient light in the car, the reading light can offer adequate brightness for passengers without affecting the driver's normal operation. Some car owners forget to turn off the interior reading light after locking the car, which may lead to battery drain and prevent the car from starting. In case of a drained battery, you can seek assistance from another vehicle for a jump start: 1. Connect the red jumper cable to the positive terminal of the dead battery, then connect the black jumper cable to a metal part of the dead car's engine compartment. 2. Connect the other end of the red jumper cable to the positive terminal of the live battery, and the black jumper cable to the negative terminal of the live battery.
11
5
Share

Why does Volkswagen use 95 octane?

Why Volkswagen uses 95 octane gasoline is as follows: Volkswagen vehicles use 95 octane gasoline because most of its models are equipped with turbocharged engines. During high-speed driving, the turbocharger performs more powerfully, which imposes strict requirements on gasoline. 95 octane gasoline has better anti-knock properties compared to 92 octane gasoline. If German cars use 92 octane gasoline for an extended period, it can lead to engine knocking, which is very dangerous. Additional information: The difference in gasoline grades is mainly due to the varying octane levels of additives (octane affects anti-knock performance). The higher the gasoline grade, the higher the octane level, and the better the anti-knock performance, making it more suitable for high-compression engines. However, this is not absolute, as it also depends on the manufacturer's technology, tuning, and the engine's inherent characteristics.
8
1
Share

What is imvkool film?

imvkool is a brand of automotive window film produced by V-KOOL. Below is an introduction to V-KOOL window films: 1. Principle: V-KOOL heat insulation films utilize ultra-transparent high-grade polymers combined with precious metals (such as gold, silver, and indium oxide) through a molecular-level sputtering process. 2. Thermal insulation effect: After installing V-KOOL film on car windows, the interior temperature can be reduced by 8 to 12 degrees Celsius, with quicker cooling time, creating a more comfortable and cooler cabin environment that enhances driver comfort and reaction capabilities. In the unfortunate event of a traffic accident, V-KOOL film can help hold shattered glass together, preventing flying glass pieces and sharp fragments from injuring the driver.
9
2
Share

What needs to be maintained for a car at 20,000 kilometers?

What needs to be maintained for a car at 20,000 kilometers is: 1. Replace the engine oil, oil filter, clean the air filter, and check whether the generator belt and wiper blades are damaged; 2. Check whether the levels of various fluids are normal; 3. Check whether the tire pressure is normal and whether the tires have uneven wear, bulges, or damage; 4. Inspect the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Check whether all switches and lights in the car are working properly. The precautions for car maintenance are: 1. Make an appointment in advance; 2. Record any malfunctions or questions encountered while driving and inform the staff during the maintenance registration.
3
2
Share

What does the second maintenance include?

Vehicle second maintenance includes the following items: 1. Replace engine oil, oil filter, air filter, check engine belt tension, rotation speed, and various fluid levels. 2. Check tire pressure, look for bulges, damages, or uneven wear. 3. Inspect chassis, brake pads, brake discs, ball joints, CV joints, and connecting rods for any scratches or damage. 4. Finally check all lights and vehicle switches. Here's more information about car maintenance: 1. The first maintenance (also called initial maintenance) typically involves oil and filter replacement, with some models also requiring gear oil replacement. 2. The second maintenance is usually performed at around 10,000 kilometers where dealerships typically perform a basic maintenance including replacing 4 filters and oil, followed by tire rotation. 3. The third maintenance normally only requires oil and filter replacement.
5
5
Share

Why does a car worth 120,000 only have an invoice of 90,000?

This practice is called under-invoicing, which is illegal. Merchants do this to evade taxes. To protect your rights, you can request a reissued invoice. When you notice a discrepancy between the car purchase price and the invoice price, keep all evidence and raise the issue with the 4S store. If they cannot provide a reasonable explanation, you can report it to the tax authorities or file a complaint with the consumer association. The dangers of under-invoicing include: 1. Car insurance: Mainly for comprehensive and theft insurance, where claims are only compensated based on the invoice amount. When selling the car as a used vehicle, depreciation is calculated from the invoice price, leading to undervaluation. 2. Claims: When making a claim, compensation is only based on the actual invoice price.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.