What Does It Mean When the Tire Light Comes On?

1 Answers
DelSamuel
07/29/25 9:52pm
The reasons for the tire light coming on include a punctured tire or excessive tire pressure. Below is a detailed analysis of the specific situations: 1. Punctured Tire: This situation usually involves a very slow leak, making it difficult to immediately identify which tire is affected. In this case, you can use a tire pressure gauge to measure the pressure—2.3 bar for the front tires and 2.5 bar for the rear tires. If the pressure is low, refill it and then observe the tire pressure warning light. If it comes on again after a few days, you may need to remove the tire for inspection. 2. Excessive Tire Pressure: According to the international GBT-2978-2008 standard, the inflation pressure for passenger car tires should meet the requirements—standard tires should be between 2.4-2.5 bar, and reinforced tires between 2.8-2.9 bar. The maximum pressure should not exceed 3.5 bar. Therefore, if any tire exceeds 3.0 bar, it may trigger the tire pressure monitoring light. 3. Prolonged Driving with Low Tire Pressure: This situation usually occurs when one tire has significantly low pressure, causing the tire temperature to rise due to high-speed operation, which in turn increases the tire pressure. In such cases, you should stop and rest or replace the tire with a spare one promptly.
Was this review help?
2
4
Share
More Forum Discussions

What are the differences between Lavida and Octavia Pro?

The differences between Lavida and Octavia Pro are as follows in 2 aspects: In terms of body size: The top version of Lavida is shorter than the top version of Octavia Pro. The latest top version of Lavida has a body length, width, and height of 4670mm x 1806mm x 1474mm, with a wheelbase of 2688mm. The latest top version of Octavia Pro has a body length, width, and height of 4753mm x 1832mm x 1469mm, with a wheelbase of 2730mm. In terms of appearance: Octavia Pro leans towards a sporty exterior and youthful interior, featuring a hatchback tailgate and better rear space, highlighting its automotive characteristics. Lavida's front design is very Volkswagen-like, with straight lines that align well with Eastern aesthetic preferences, and it also visually stretches the width of the front end.
20
4
Share

What are the causes of abnormal noise when reversing and braking in a Cruze?

Causes of abnormal noise when reversing and braking in a Cruze: 1. Some metal powder is generated when the brake discs rub against each other, which can produce abnormal noises when braking. This type of noise from the brake pads is a normal noise phenomenon. 2. The brake pads have worn to their limit, causing the brake warning shim to rub against the brake disc, resulting in a metal-on-metal sound. Solutions for abnormal brake noises: 1. Firmly press the brakes several times or perform emergency braking in an open area to improve the situation. 2. Replace the car's brake pads in a timely manner to prevent potential hazards.
11
2
Share

Does Audi have an A9?

Audi has an A9. The following is the relevant information about the Audi A9: Exterior Design: The new car adopts a SportBack design, making it a four-door luxury sports car that combines sportiness and luxury. The flat headlights and oversized air intakes give the front face an aggressive look, complemented by a sleek waistline and robust fenders. Power Configuration: It is equipped with a 4.0L V8 engine and a 6.3L W12 engine, while the European market will have more economical V6 or V8 diesel engines. At the same time, while maintaining the luxury and comfort of the A8, its handling will be significantly improved.
4
1
Share

Do China VI Vehicles Consume Urea?

China VI vehicles still consume urea, and the requirements for OEMs are becoming increasingly stringent. Emission pollutant limits for China VI vehicles: Sensors will be added to the vehicle's after-treatment system to directly upload exhaust emissions data to the national environmental protection department. The department will evaluate OEMs based on vehicle exhaust emission tests. If an OEM's vehicles fail to meet emission standards or are found to have engaged in cheating behavior, the OEM will be immediately penalized. China VI Emission Driver Alert System: China VI emission standards introduce a new requirement: vehicles must have a "Driver Alert System." This system is a newly added, independent alert system: the Driver Alert System (using newly added "LCD display" warnings or warning lights).
11
1
Share

Why can't the key be sensed after applying film to the Mazda3 Axela?

After applying film to the Mazda3 Axela, the key may not be sensed due to interference from metallic film or water ingress into the sensor. Metallic film interference: Check if the glass film itself is causing interference. Some films contain metallic particles that can affect signal transmission. Water ingress into the sensor: Water may have entered the sensor during the film application process. Proper vehicle protection, especially waterproofing, is essential during film installation. If excessive water flows into the vehicle's dashboard, door panels, window switch components, etc., during cleaning and film application, it can lead to various unforeseen issues related to these parts. These situations should not be overlooked. Minor cases may resolve on their own after a few days, while more severe cases could damage vehicle components, causing unnecessary trouble.
16
1
Share

Can the Haval H6 Screen Play Videos?

Haval H6 screen can play videos. Below are the relevant details about the car's central control: Introduction: The car's central control is the area where comfort and entertainment devices such as air conditioning and audio are controlled. The central control includes the central locking system, allowing the driver to control the opening and closing of all car doors and the window lifting system. The central locking system primarily has three functions: central control, speed control, and individual control. The driver can control all door locks, and when the vehicle reaches a certain speed, the doors automatically lock. Other doors have independent switches, allowing individual control of each door. Actuator: The central locking actuator is used to execute the driver's commands to lock or unlock the doors. There are three types of door lock actuators: electromagnetic, DC motor, and permanent magnet motor. All these structures change polarity to reverse their motion direction, thereby performing the locking or unlocking action.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.