What does it mean when the safety technical inspection exceeds the validity period?

1 Answers
SanJace
07/29/25 7:47pm
It means the vehicle's annual inspection has expired, and the relevant annual inspection procedures should be completed as soon as possible. Relevant information about vehicle annual inspection is as follows: 1. Introduction: Vehicle annual inspection (Vehicles-inspection), also known as motor vehicle inspection. Depending on the usage nature of the motor vehicle, its inspection items and scope also differ. 2. Inspection items: According to the definition in RB/T218-2017 "Requirements for Qualification and Competence Assessment of Inspection Bodies - Motor Vehicle Inspection Institutions," motor vehicle inspection includes three categories: motor vehicle safety technical inspection, motor vehicle emission inspection, and comprehensive performance inspection of vehicles.
Was this review help?
13
2
Share
More Forum Discussions

What Causes Poor Acceleration and Dullness After an Oil Change?

It may be caused by overfilling or underfilling the oil. Below is relevant information: 1. Engine Lubrication System: If the engine lubrication system has not been cleaned for a long time and is dirty with many deposits, changing to new oil will flush out some impurities suspended in the oil, potentially clogging the oil filter and causing insufficient power. Changing the oil once will make the system cleaner and improve performance. 2. Oil Viscosity Grade: Regarding oil viscosity grade classification, the standard of the Society of Automotive Engineers (SAE) is generally used. Car owners can choose the oil based on their vehicle's operating temperature. For example, SAE 15W-40, 10W-40, or 5W-50. The smaller the number before the W, the lower the low-temperature viscosity, providing better protection during cold engine starts. The number after W indicates the oil's high-temperature resistance.
2
3
Share

Which gear should be used for climbing hills with a manual-automatic transmission?

When climbing hills with a manual-automatic transmission, you can switch to manual mode and then select 1st or 2nd gear to maintain a stable RPM above 3000 for hill climbing. Relevant information about manual-automatic transmissions is as follows: 1. A manual-automatic transmission combines the manual and automatic shifting methods of a car. The manual mode allows you to freely adjust gears and RPM, providing a thrilling driving experience with a strong sense of sportiness and driving pleasure. 2. The manual-automatic transmission is designed to enhance the fuel efficiency and controllability of automatic transmissions by returning the shift timing, originally determined by the computer, back to the driver. At the same time, in urban traffic congestion, you can still use the automatic mode for ease of driving. The manual-automatic transmission combines the advantages of both automatic and manual transmissions.
18
5
Share

How Deep Can Water Be Before a Car Cannot Pass Through?

Water reaching the height of the vehicle's air intake means it cannot pass through. Maximum wading depth of a vehicle: The maximum wading depth of a vehicle is determined by the height of its air intake, which is why you often see vehicles submerged in water. When the water depth exceeds the height of the exhaust pipe, the driver needs to keep pressing the accelerator to maintain the air pressure inside the exhaust pipe. If the engine stalls, water can flow back into the exhaust pipe. Hazards of vehicle wading: Water can enter the engine cylinders through the intake and exhaust systems. Since water is incompressible, it can cause bending and deformation of the valve linkage and piston cranks. In severe cases, it can damage the cylinder block. Water entering the vehicle's electrical circuits, especially the onboard computer, can cause short circuits. While ordinary circuits may be manageable, if the onboard computer gets damaged by water, replacement is usually the only option.
18
0
Share

How to solve the problem of CRV shaking when the air conditioner is on but not when it's off?

Here is information about the CRV shaking when the air conditioner is on. Excessive carbon deposits: If the engine's throttle has not been maintained for a long time, it is easy to accumulate carbon deposits. These deposits can obstruct the engine's intake system, leading to incomplete air intake. As a result, the engine may struggle or barely manage to drive the compressor, causing idle shaking. Damaged spark plugs: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Spark plugs are parts that are prone to wear and tear. Poor spark plug performance can cause the engine to shake during startup, affecting the engine's power output. Combined with the additional load from the compressor, this can lead to shaking when the air conditioner is on. If the spark plugs have excessive carbon deposits or are damaged, it is recommended to replace them directly.
10
5
Share

How long after transferring the exam location can I schedule the test?

You can schedule the test one week after transferring the exam location. Below is relevant information about transferring the exam location: 1. Exam Explanation: Applicants applying for a small vehicle driver's license (C1, C2) who have passed some of the exam subjects and need to relocate for work, study, or personal reasons can apply to change the exam location. 2. Application Location: You can directly apply to change the exam location at the vehicle management office in your current place of residence, without needing to return to the original exam location. The exam location can be changed once. 4. Application Procedures: Mainland residents can directly process the exam location change with their resident ID card; residents from Hong Kong, Macau, and Taiwan can use their residence permits. For other individuals and circumstances, the required identification documents must comply with the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses.'
10
1
Share

How to Reverse a Car Correctly for Beginners?

1. Ensure safety. For beginners, the first step is to confirm whether the area behind the car is safe. If you're unsure, you can get out of the car to check. Only proceed with reversing after ensuring safety. If someone is nearby, it's best to ask for their assistance in checking. 2. Maintain the correct posture. A proper driving posture is crucial for safe driving, and this applies to reversing as well. When looking through the rear window, hold the upper part of the steering wheel with your left hand and turn your body to get a wide rearview angle. If you're looking sideways while reversing, hold the steering wheel with your right hand and slightly extend your head out. 3. Keep the speed slow. It's essential to control the speed while reversing. Avoid pressing the accelerator pedal. For beginners, you can use your left foot to control the clutch, keeping it in a semi-engaged state, while placing your right foot on the brake pedal, ready to brake at any moment.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.