What does it mean when the front passenger airbag in a Mercedes-Benz is deactivated?

1 Answers
VonBrayden
07/30/25 3:43am
When the front passenger airbag in a Mercedes-Benz is deactivated, it indicates a malfunction in the airbag safety monitoring system. Relevant information: 1. Introduction: The electronic safety airbag (electronic-control-of-safety-airbag) system is a passive safety (see vehicle safety performance) protection system. When used in conjunction with seat belts, it provides effective collision protection for occupants. In the event of a car collision, the airbag can reduce head injuries by 25% and facial injuries by approximately 80%. 2. Expansion: It is made of special fabric nylon with a rubber lining and is filled with harmless helium gas during operation. In the event of a collision, the airbag inflates in about 0.03 seconds. This rapid inflation ensures that the airbag is in place in time when the passenger's body is restrained by the seat belt while the head continues to move forward.
Was this review help?
8
5
Share
More Forum Discussions

What does Camry Dual Engine mean?

Camry Dual Engine is a Camry model that adopts Toyota's latest hybrid technology. It mainly consists of two power sources: an engine and an electric motor. When starting and moving off, the vehicle basically does not use the engine but is started and driven by the electric motor, which has a maximum output of 270 Nm. Characteristics of Dual Engine vehicles: Dual Engine refers to HEV (Hybrid Electric Vehicles), which have both an engine and an electric motor as power sources. They use a special system to capture the energy generated during braking and store it in the onboard battery, improving power performance while reducing fuel consumption. The characteristic of Dual Engine vehicles is that they can optimally combine the advantages of the engine and the electric motor according to different conditions such as starting, driving, accelerating, and stopping, allowing the vehicle to make intelligent decisions. This technology achieves both excellent environmental performance and driving performance. Additionally, the vehicle itself has a charging function and does not require an external power source for charging.
13
5
Share

What is the failure rate for Subject 3?

Subject 3 has a failure rate of approximately 60%, as this test heavily emphasizes practical operation, presenting significant difficulty for beginners. Therefore, failing is quite common. Below are relevant details about the Subject 3 test: Test precautions: During the test, remain calm and composed. When shifting gears or operating lights, avoid letting nervousness affect your performance, and don't lose points on the simplest procedures. When shifting gears, first adjust the speed to the appropriate level, then quickly depress the clutch, release the accelerator, and shift gears. Gradually release the clutch to prevent the vehicle from jerking. Subject 3 training hours: Subject 3 requires a total of 40 training hours, including 16 hours of theory, 4 hours of simulated driving, and 20 hours of practical operation. According to the teaching syllabus, each student can log a maximum of 4 training hours per day.
13
2
Share

What is the reason for displaying incorrect brand and model when applying for a Beijing entry permit?

The reason for displaying incorrect brand and model when applying for a Beijing entry permit may be due to unprocessed traffic violations for the submitted vehicle. Below are solutions and precautions for applying for a Beijing entry permit: Solutions for incorrect brand and model: If the submitted vehicle has unprocessed traffic violations leading to the display of incorrect brand and model, promptly handle the violations through the Traffic Management 12123 APP or offline, and pay the fines in a timely manner. Precautions for applying for a Beijing entry permit: If the displayed license plate model is incorrect, it may involve errors in filling in the engine number and the letters and numbers in the license plate number. If "no such vehicle" is displayed, it indicates that the ID card has already been used to apply for a Beijing entry permit. If the display shows the vehicle has not been inspected, it may be due to incorrect registration date entry. Beijing inspection stations and permit offices operate 24 hours a day.
6
3
Share

What is the method for installing a one-touch window lifter on the MG6?

The method for installing a one-touch window lifter on the MG6 is: 1. Remove the interior trim panel at the window lift switch; 2. Connect the serial wiring harness's upper and lower interfaces to the original vehicle's interfaces. Taking the 2020 MG6 as an example, it belongs to the compact car category, with body dimensions of: length 4704mm, width 1848mm, height 1466mm, a wheelbase of 2715mm, a fuel tank capacity of 50l, and a curb weight of 1300kg. The 2020 MG6 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5l turbocharged engine, delivering a maximum horsepower of 181ps, a maximum power of 133kw, and a maximum torque of 285nm, paired with a 6-speed manual transmission.
16
4
Share

Is the Volkswagen Tayron 4WD?

The Volkswagen Tayron offers 4WD models, with some variants equipped with Volkswagen's 4MOTION intelligent all-wheel-drive system. Here are the relevant details: 1. This 4WD system used by Volkswagen is fitted with BorgWarner's fifth-generation electronically controlled multi-plate clutch center differential. During driving, it can achieve 100% rear-wheel power output under extreme conditions, ensuring the vehicle's off-road performance. The Tayron also provides four on-road driving modes, two off-road modes, and one snow mode. 2. In terms of power, the Tayron is equipped with 1.4T and 2.0T high/low-power engines. The entry-level model features a 1.4T engine (model EA211) with a maximum power output of 110kW and maximum torque of 250Nm. All other models use the EA888 series 2.0T engine - the low-power version produces 137kW/320Nm, while the high-power version delivers 162kW/350Nm.
19
0
Share

What are the hazards of metal car key covers?

Metal car key covers can significantly interfere with the signal transmission of car remote keys, potentially causing delayed response from the vehicle after key operation. Below is an explanation of how car remote keys work and methods to unlock a car when the key is lost: How car remote keys work: Car keys contain a radio remote signal generator, which emits weak radio waves when pressed. These signals are received by the car's antenna, identified by the electronic control unit (ECU), and then executed by the system's actuator. Methods to unlock a car when the key is lost: If the primary key is lost, the spare key can be used; 4S stores typically offer after-sales rescue services—simply call and wait for the rescue team to arrive and help match a new key; alternatively, seek assistance from a qualified and licensed locksmith company to unlock the car.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.