What does it mean when the D gear shows as DS gear?

How to Replace Coolant for Cruze?

Cruze coolant replacement method: 1. Unscrew the radiator cap, you can use a tube to extract some of the coolant inside; 2. Access the front underside of the car, use thin wire to slowly lift the clamp buckle of the drain hose, loosen the clamp, remove the drain plug and the coolant will start spraying out; 3. When the coolant stops flowing, begin unscrewing the radiator cap, remove the radiator return valve, then use an air pump to pressurize the system by blowing air inside - this will cause repeated spurts until completely drained; 4. Reconnect the drain hose to its original position, making sure to tighten it securely; 5. Pour new coolant into the reservoir, after filling you can drive the car for several rounds until the radiator fan operates and the thermostat opens. The Cruze is a compact car under SAIC-GM Chevrolet, with dimensions of 4666mm in length, 1807mm in width, 1460mm in height, and a wheelbase of 2700mm.

15

4

Share

How to Use the Cruise Control in the Honda Vezel?

Honda Vezel cruise control usage method: 1. Press the CRUISE button to increase the speed to above 40 km/h; 2. Press the SET button to activate cruise control; 3. Press the brake or CANCEL button to deactivate cruise control. During cruise control activation, each press of the RES button increases the speed by 1 km/h, and each press of the SET button decreases the speed by 1 km/h. You can also hold down the RES or SET button until the desired speed is reached. If cruise control is canceled by deceleration, pressing the RES button will return to the original cruise speed. The Honda Vezel is an SUV developed from the chassis of the all-new Honda Fit. The vehicle measures 4328 mm in length, 1772 mm in width, and 1605 mm in height, with a wheelbase of 2610 mm. In terms of suspension, the front suspension of the Vezel is a MacPherson strut independent suspension, and the rear suspension is a torsion beam non-independent suspension.

13

1

Share

How to Check the Engine Oil in a Panamera?

To check the engine oil in a Panamera, follow these steps: View it on the instrument panel. There is an engine oil level option in the information source section of the instrument panel display. The vehicle needs to be running for detection, and it usually takes about 3 minutes for the reading to appear. According to the manual, the Panamera requires 8.5 liters of engine oil, but in practice, approximately 9 liters are needed. The Panamera is the Chinese translation for Porsche's Panamera. Its body dimensions are 4970mm in length, 1931mm in width, and 1418mm in height, with a wheelbase of 2920mm. The Panamera features a four-door design, with large air intakes on each side of the front fascia. Horizontal strip-style fog lights run through them, creating a unique look. The side profile is sleek and smooth, combining elegance with dynamism. The massive five-spoke wheel hubs paired with black brake calipers hint at its impressive sporty potential.

13

3

Share

How to activate the cruise control on the Lamando?

The method to activate the cruise control on the Lamando is as follows: There are 4 buttons on the left side of the steering wheel. The upper right button is the master switch to turn it on, the lower left button is used to set the cruise control based on the current speed, the upper left button is for resuming the previously saved speed after using the brake or accelerator, and the lower right button is for temporarily deactivating the cruise control. Cruise control, also known as speed control system or autonomous driving system, functions by maintaining the vehicle's speed as set by the driver without the need to press the accelerator pedal. The Lamando is a model under SAIC Volkswagen, with body dimensions of 4599mm in length, 1826mm in width, and 1425mm in height, and a wheelbase of 2656mm. In terms of exterior design, the Lamando features two chrome strips on the upper grille, seamlessly connected with the chrome eyebrow of the headlights. The front bumper, paired with the lower grille, extends horizontally towards both sides, creating a striking visual impact.

16

1

Share

How to Determine if a Car Battery is Good or Bad?

There are several methods to determine the condition of a car battery: 1. Currently, over 80% of maintenance-free batteries come with a charge indicator. The colors visible in the indicator are generally divided into three types: green, black, and white. Green indicates sufficient charge, black indicates slight discharge, and white means the battery is dead and needs replacement. For specific details, refer to the label on the battery. 2. Measure the battery voltage using a battery tester or multimeter. Under normal conditions, the no-load voltage of the battery should be around 13 volts, the load voltage should generally not be lower than 12 volts, and the starting voltage should not drop below 9.5 volts. If the battery voltage is too low, it may result in difficulty starting the vehicle or failure to start. 3. Check both sides of the battery for noticeable swelling, deformation, or bulging. 4. Look around the battery terminals for any white or green powdery substances. These are battery oxides. High-quality or new batteries typically do not develop these oxides easily. Once they appear, it indicates that the battery's performance is starting to deteriorate.

7

4

Share

What does the approach angle of a car mean?

The approach angle of a car refers to the angle between the tangent line drawn from the frontmost protruding point of the car to the front wheels and the ground when the car is fully loaded and stationary. In other words, it is the maximum angle between the horizontal plane and the plane tangent to the outer edge of the front wheel tires (under static load). No rigid components fixed to the vehicle in front of the front axle should be below this plane. The larger the approach angle, the less likely the car is to experience a 'nose-dive' accident when going up or down slopes or during off-road driving, and the better the car's passing performance. The departure angle refers to the angle between the tangent line drawn from the rearmost protruding point of the car to the rear wheels and the ground when the car is fully loaded and stationary. The larger the departure angle, the less likely it is for the rear of the vehicle to touch the ground and prevent passage; the smaller the departure angle, the more likely it is for the rear of the vehicle to touch the ground and prevent passage.

19

2

Share

What does it mean when the D gear shows as DS gear?

How to Replace Coolant for Cruze?

How to Use the Cruise Control in the Honda Vezel?

How to Check the Engine Oil in a Panamera?

How to activate the cruise control on the Lamando?

How to Determine if a Car Battery is Good or Bad?

What does the approach angle of a car mean?

What Causes Difficulty Inflating a Newly Replaced Tire with Large Gaps?

How to Adjust a Misaligned Car Steering Wheel?

How to reset the tire pressure light on a 2019 CR-V?

What are the symptoms of a faulty oxygen sensor in a motorcycle?