What does it mean when a red car appears in the middle of the BMW dashboard?

1 Answers
OEverett
07/29/25 8:53am
When a red car appears in the middle of the BMW dashboard, it is the warning light of the Driving Assistant Collision Warning System. Below is relevant information: Introduction to the Driving Assistant Collision Warning System: The red car appearing in the middle of the BMW dashboard is the warning light of the Driving Assistant Collision Warning System. It illuminates to alert the driver that the vehicle is too close to the one ahead, posing a risk of rear-end collision. Please maintain a safe distance from the vehicle in front to enhance driving safety. Introduction to BMW Cars: BMW cars refer to vehicles produced by BMW AG. The main series models include the 1, 2, 3, 4, 5, 6, 7, and 8 series, renowned for producing luxury cars, motorcycles, and high-performance engines. The BMW X5 is an all-wheel-drive vehicle with increased ground clearance, designed on the basis of a touring car, known as a multi-purpose sports utility vehicle (SUV). In terms of configuration, the BMW X5 is equipped with technologies such as the Traction Control System and Automatic Dynamic Stability Control, featuring an inline 6-cylinder or V-type 8-cylinder engine.
Was this review help?
16
5
Share
More Forum Discussions

How to engage 4WD in Mitsubishi Pajero?

There are three main methods to use the 4WD system in Mitsubishi Pajero: 1. Differential lock engagement: Next to the gear shift lever of the Mitsubishi Pajero Sport, there is a smaller 4WD lever. The options are H2, H4, H4L, and L4L. All modes with the number 4 are 4WD modes: H2 is high-speed 2WD, H4 is high-speed 4WD, H4L is high-speed 4WD with differential lock engaged, and L4L is low-speed 4WD with differential lock engaged. 2. Drive modes: Only H2 is 2WD mode, while the other three are 4WD modes. Simply shift the small lever to one of the 4WD positions. The three different 4WD modes are selected based on varying road conditions—basically, the more challenging the terrain, the further back the mode you should choose. 3. Gear shifting: To engage low-range 4WD (L4L), the vehicle must be stopped, whereas high-range 4WD (H4) can be engaged without stopping and allows free switching between 0-80 km/h. The front differential lock does not require shifting to neutral (N), but the vehicle must be stationary to engage it.
17
1
Share

How is the quality of Zhejiang Xinben motorcycles?

Zhejiang Xinben motorcycles have decent quality. Motorcycle lifespan: The lifespan and continuous mileage of a motorcycle are largely related to its design. According to many relevant sources, the lifespan of brand-new motorcycle tires is approximately 50,000 kilometers, while the engine's lifespan is around 100,000 kilometers. Safety precautions: During motorcycle usage, proper vehicle maintenance should be performed to minimize high-intensity continuous operation and avoid excessive wear during use. When riding continuously for long periods, the body's endurance capacity should also be considered.
14
2
Share

How many differential locks does the Wrangler have?

The Wrangler has 3 differential locks. Function of differential locks: Primarily prevents the differential from becoming ineffective. When one wheel spins freely, the other wheel also fails to receive adequate torque, rendering the differential useless. Locking the differential at this point connects the two wheels together, helping the vehicle escape from driving difficulties. Introduction to differential: The differential is a crucial component in the power transmission process of a vehicle's chassis, allowing the left and right wheels to rotate at different speeds. During a turn, the inner and outer wheels inevitably develop a speed difference. Without a differential, the wheels would experience abnormal slippage, leading to tire wear.
4
0
Share

Where is the frame number of Haima car located?

The frame number of Haima car is located on the right side of the frame. Changes to the frame color: You can modify the body color, engine, fuel type, frame number, etc., but there are three colors reserved for special vehicles and cannot be used. Red is for firefighting, yellow is for engineering rescue, and white over blue is for national administrative law enforcement. Frame components: Changes to the body, frame, or engine can only be made if they are damaged beyond repair or have quality issues. When applying for modifications, you must provide a repair shop certificate and proof of origin for the replacement engine, body, or frame. Replacing the front bumper is considered altering the car's appearance and is allowed after approval, but modifications like raising the chassis to enhance off-road performance are prohibited. If any illegal modifications are found during the annual inspection, they must be restored to the original state.
14
1
Share

What is the complete process sequence for the Subject 2 driving test?

Subject 2 test item sequence: 1. Collect files: The driving school organizes or individuals go to the local "Motor Vehicle Driver Examination Center" to collect personal examination files. 2. Wait in the waiting room: Enter the waiting room in order, submit personal files in the order of entry, and watch the electronic display screen in the waiting room. The screen will display the candidate's name, ID number, car number, and examination area. 3. Wait to board the car: According to the displayed car number and area, find the car used for the test. If someone is currently taking the test in the car, please wait aside. If no one is in the car, board the car as required by the on-site examiner. 4. Test preparation: After boarding the car, do not rush to start the test. Adjust the seat, fasten the seat belt, and adjust the rearview mirror (some candidates do not know how to adjust the rearview mirror—press the adjustment button to the lowest position and move it toward the front of the car). As required, input the fingerprint (the fingerprint input device is usually on the co-driver seat or the right side). When the voice prompt indicates the start of the test, release the handbrake and begin the test. 5. Start the test: During the test, proceed in the following order: reverse parking—parallel parking—right-angle turn—curve driving—half-slope stop and start.
15
1
Share

Where are the Tesla airbags located?

Tesla has airbags and safety belts/shoulder straps installed on the outer sides of both front seats. Airbags: An airbag is a vehicle occupant restraint system that uses a cushion designed to inflate rapidly during a collision and then deflate quickly. It consists of an airbag cushion, a flexible fabric bag, an inflation module, and an impact sensor. The purpose of an airbag is to provide a soft cushion and restraint for occupants during a collision event. It can reduce injuries between passengers and vehicle occupants. Vehicle airbag locations: Airbags provide an energy-absorbing surface between vehicle occupants and the steering wheel, dashboard, as well as body pillars, headliner, and windshield. Modern vehicles may include multiple configurations of airbag modules, including driver, passenger, curtain, seat side impact, knee bolster, inflatable seat belts, right front side and left side sensors, and pedestrian airbag modules.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.