What does Excelle GT mean?

1 Answers
LucyMarie
07/29/25 4:58pm
Excelle GT is a sedan, meticulously crafted as the perfect vehicle for those who pursue a quality lifestyle. Below are the details about Excelle GT: 1. The Excelle is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 83kW (113PS) and a peak torque of 141 N·m; it also offers a 1.3T engine paired with a 48V mild hybrid system, with the engine producing a maximum power of 120kW (163PS) and a peak torque of 230 N·m. In terms of the transmission system, the Excelle is matched with a 6-speed automatic transmission. 2. The Excelle's body dimensions are 4609mm in length, 1798mm in width, and 1464mm in height, making it a 4-door, 5-seater sedan.
Was this review help?
12
4
Share
More Forum Discussions

How many kilometers should the Qashqai's spark plugs be replaced?

The Qashqai's spark plugs should be replaced every 40,000 kilometers. The operation method is: 1. Pull upwards to loosen the spark plug in the engine with a wrench; 2. After removing the old spark plug, install the new one. The Qashqai is positioned as a compact SUV, with body dimensions of 4401mm in length, 1837mm in width, and 1611mm in height, and a wheelbase of 2646mm. In terms of power, the Qashqai is equipped with a 2.0L naturally aspirated engine, with a maximum power output of 154 horsepower, paired with a CVT continuously variable transmission. For suspension, the Qashqai features a MacPherson independent front suspension and a multi-link independent rear suspension.
18
2
Share

How to Replace the Air Filter of the Tiida?

The method to replace the air filter of the Tiida is as follows: 1. Remove the dampers on both sides of the glove box to take out the glove box; 2. Release the clip on the right side of the air filter cover, then remove the old air filter; 3. Install the new air filter, cover the air filter cover, and secure the clip on the right side. The Tiida is a car produced by Dongfeng Nissan Passenger Vehicle Company, with body dimensions of 4250mm in length, 1695mm in width, and 1535mm in height. In terms of appearance, the Tiida adopts a lot of curved lines, making the new Tiida look more fashionable, with a wavy waistline on the side that gives it a sense of tension and dynamism.
18
3
Share

Where is the OBD of Dongfeng Peugeot 308?

The OBD of Dongfeng Peugeot 308 is located below the left side of the steering wheel. OBD is the On-Board Diagnostics system. This system can monitor the working conditions of the engine's electronic control system and other functional modules of the vehicle in real-time during operation. If any abnormal conditions are detected, it determines the specific fault according to specific algorithms and stores the diagnostic trouble codes in the system's memory. The Dongfeng Peugeot 308 is a compact sedan with body dimensions of 4558mm in length, 1805mm in width, and 1505mm in height. In terms of power, the Dongfeng Peugeot 308 is equipped with a 1.6L inline four-cylinder engine and a 1.2T inline three-cylinder engine.
12
3
Share

How long is the battery warranty for the 2020 XPeng G3?

The battery warranty for the 2020 XPeng G3 is 8 years or 150,000 kilometers, while the vehicle warranty period is 4 years or 100,000 kilometers. The 2020 XPeng G3 is an SUV with body dimensions of 4450mm in length, 1820mm in width, and 1678mm in height, with a wheelbase of 2625mm. In terms of power, the 2020 XPeng G3 is equipped with a permanent magnet synchronous motor, delivering a maximum power of 197 horsepower and a peak torque of 300 Nm, achieving a 0-100 km/h acceleration in just 8.6 seconds. For suspension, the 2020 XPeng G3 features a front MacPherson independent suspension combined with a rear torsion beam non-independent suspension setup.
12
1
Share

Where is the oil located on the dipstick?

Oil is located between the upper and lower limits on the dipstick. The dipstick is usually found on the engine cover, typically with an orange or red handle. The method to check is: 1. Pull it out and wipe off the oil with a tissue; 2. Insert it again, then pull it out to check the oil level—if it's within the marked range, it's normal. The dipstick measures the static oil level height, indicating whether the engine oil level is within a reasonable range. Standard dipsticks have clear upper and lower limits; just ensure the measured oil level is between these marks. Since the dipstick insertion hole has a curved path, the dipstick must be able to deform when inserted and rebound when pulled out.
8
3
Share

How to reset the maintenance light on Linmu Qiyue?

The method to reset the maintenance light on Linmu Qiyue is as follows: 1. Turn the ignition switch to ON mode; 2. Briefly press the indicator selection button on the right side of the instrument panel until the information display switches to the remaining mileage display; 3. Hold down the indicator selection button for more than 5 seconds until 'OIL' is displayed for 2 seconds; 4. Release the indicator selection button and quickly press it 5 times within 3 seconds. After flashing 3 times, the light will go off, indicating the reset is complete. The Linmu Qiyue is a compact car with body dimensions of 4545mm in length, 1730mm in width, and 1475mm in height, and a wheelbase of 2650mm. In terms of power, the Linmu Qiyue is equipped with a 1.6L naturally aspirated engine.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.