What does Dongfeng Honda's fuel pump recall mean?

1 Answers
Olga
07/25/25 11:47am
Honda's fuel pump recall refers to the process where the manufacturer of defective automotive products must eliminate product defects in accordance with legal requirements and procedures due to identified faults in the fuel pump. Honda is a joint venture company engaged in automobile production and research & development, with product lines including the Crown SUV series, Accord sedan series, and Odyssey multi-purpose sedan series. Among these, the Accord features refined and smooth body lines, integrating a fashionable and dynamic appearance with an elegant demeanor. The taillight design adopts LED high-mounted brake lights commonly used in luxury models and a classic triangular combination taillight, presenting a clean and crisp look. Additional information: 1. Function of the fuel pump: The fuel pump's role is to draw fuel from the fuel tank, pressurize it, and then deliver it to the fuel supply line, working in conjunction with the fuel pressure regulator to establish a certain fuel pressure. 2. Introduction to the fuel pump: The fuel pump is a professional term in the automotive parts industry. It is one of the fundamental components of the fuel injection system in electronically controlled fuel injection vehicles, located inside the vehicle's fuel tank. The fuel pump operates during startup and while the engine is running. If the engine stops but the ignition switch remains in the ON position, the HFM-SFI control module will cut off the power supply to the fuel pump to prevent accidental ignition.
Was this review help?
14
1
Share
More Forum Discussions

What does it mean when the car's off light is on?

The car's off light being on indicates that the Electronic Stability Program (ESP) has been turned off or that there is a malfunction in the ESP system. The main warning lights in a car include: 1. A triangle with an exclamation mark in the middle is the general fault indicator light. 2. A yellow symbol with parentheses, a horizontal line at the bottom, not fully enclosed at the top, and an exclamation mark inside is the tire pressure monitoring warning light. Other warning lights in a car include: 1. A yellow light bulb with an exclamation mark is the lighting fault indicator light. If this light is on, it indicates a fault with an exterior light bulb. 2. A yellow gear with an exclamation mark is the transmission fault indicator light, visible in cars equipped with multitronic transmissions. When this light is on, it indicates an abnormality or fault in the transmission. 3. A yellow sector with an exclamation mark is the windshield wiper fault indicator light. When this light is on, it indicates a fault in the wiper system. 4. A red steering wheel with an exclamation mark on the right is the steering system fault indicator light. If this light is on, it may indicate that the electric/mechanical steering mechanism is not working or there is a fault with the steering column lock, in which case the car should not be driven further.
16
4
Share

How to Deal with Yellowing Car Light Covers?

Methods to deal with yellowing car light covers include: 1. Clean the light cover with soapy water; 2. Soak sandpaper in cold water for 10 minutes, then evenly rub the headlight housing with the sandpaper; 3. Wipe clean with a towel; 4. Spray a layer of clear oil on the light cover. Methods for maintaining car headlights include: 1. Regularly check the light cover to avoid water droplets; 2. Replace headlights periodically; 3. Adjust the headlight height properly; 4. Use high-quality bulbs; 5. Prevent foreign objects from hitting the lights. The functions of car lights are: 1. Turn on the turn signal to alert following vehicles and reduce rear-end collisions; 2. Improve visibility of road conditions and enhance driving safety; 3. Inform vehicles behind that you are braking, prompting them to slow down.
17
2
Share

What Type of Air to Use for Windshield Fog?

For windshield fog, both cold and warm air have their own advantages and disadvantages. Below are some methods for defogging: Method 1: If you notice fog forming on your car windows, don't panic. You can open both side windows slightly, about the width of a fist. This allows air to circulate inside the car, blowing away the moisture and quickly dispersing the fog. Method 2: Turn on the car's fan and air conditioning. When cold air blows onto the glass, the fog will quickly dissipate. This happens because the cold air prevents moisture from condensing on the glass, effectively removing the fog. Method 3: Warm air can also help remove fog. However, if the glass is already fogged up while driving, turning on the warm air may worsen the fogging. Therefore, avoid using warm air to defog while driving. Instead, use warm air to dry the glass before driving. After a few minutes, the warm air will dry the moisture inside the car, and the fog will disappear. Note that the rear and side windows heat up more slowly, so it may take longer to completely remove the fog. Method 4: Use a preventive method like applying anti-fog spray. Spray a small amount of anti-fog agent onto the car windows and wipe it clean. This removes dirt and stains while forming a thin, transparent protective film on the glass. This film effectively prevents moisture from condensing and forming fog, making it especially useful in cold winters.
7
0
Share

Which car has a crown-like logo?

The car with a crown-like logo is the Toyota Crown series. The Crown is a mid-to-large-sized vehicle brand under the Toyota Group, with the silver variant belonging to the new 13th generation and the gold variant to the 12th generation. The Toyota Crown comes in four models with seven different grades, all equipped with a 3.0L dual VVTI engine and a 6-speed automatic transmission. The vehicle incorporates advanced braking technology and various excellent driving assistance features, including TRC traction control system, VSC vehicle stability control system, and VDIM vehicle dynamics integrated management system, ensuring high traction performance under various road conditions.
7
1
Share

What does the AC button on a car mean?

The AC button on a car refers to the air conditioning cooling switch. Pressing the AC button activates the air conditioning to adjust the temperature according to the set level, during which the air conditioning compressor starts, increasing the engine load. The functions of the air conditioning system include: 1. Regulating the temperature, humidity, airflow, and cleanliness of the air inside the vehicle; 2. Filtering the air inside the car, with a sterilizing effect; 3. Clearing fog from the windows. Precautions for using car air conditioning: 1. Turn off the AC during startup and rapid acceleration; 2. Avoid setting the air conditioning temperature too low—a difference of 5 to 6 degrees between the inside and outside temperature is sufficient; 3. Based on the principle that cold air sinks and hot air rises, when controlling the air vents, aim them upward when cooling and downward when heating.
16
5
Share

What engine and transmission are used in the Hyundai Verna?

Hyundai Verna is equipped with a 1.4L inline 4-cylinder naturally aspirated engine, paired with either a 5-speed manual or 4-speed automatic transmission, both of which are domestically produced. The 1.4L naturally aspirated engine used in this car has a maximum power output of 70kW and a peak torque of 132Nm. It features multi-point fuel injection technology, with a maximum power speed of 6000 rpm and a maximum torque speed of 4000 rpm. The Hyundai Verna is a model under Beijing Hyundai, classified as an A0-class compact car. Its dimensions are 4340mm in length, 1700mm in width, and 1460mm in height, with a wheelbase of 2570mm.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.