What Does Auto Parts Mean?

Is the Geely Binrui's high and low beam integrated?

Geely Binrui's lighting features an integrated high and low beam design. High beam: The intensity of the light is adjusted based on the distance of the filament. The high beam is focused at its focal point, emitting light in parallel rays that are more concentrated and brighter, capable of illuminating distant and high objects. The low beam is positioned beyond its focal point (between 1x and 2x the focal length), emitting light in a divergent state, which can illuminate a larger area at close range. Low beam: The low beam is designed for close-range illumination, with design requirements emphasizing a wide coverage angle (160 degrees) and short illumination distance, and its focus cannot be adjusted.

18

1

Share

Does the Mercedes-Benz GLE450 Burn Engine Oil?

German cars are generally more prone to burning engine oil. Not all vehicles experience oil burning, and theoretically, any car could potentially burn oil. However, in practice, German cars tend to have a higher incidence of oil burning. Requirements for engine oil: As a type of machinery, engines have similar lubrication requirements as general mechanical equipment, such as needing appropriate viscosity, certain anti-oxidation, anti-wear, anti-corrosion, and viscosity-temperature performance characteristics. Key features of engine oil: The engine is the heart of a car, containing many metal surfaces that move against each other in friction. These components operate at high speeds in harsh environments, with working temperatures reaching 400°C to 600°C. Advanced technology can convert natural gas into crystal-clean, fully synthetic base oil, which is then enhanced with proprietary cleaning technology to create lubricants with superior cleaning and protective performance. In such extreme operating conditions, only qualified lubricants can reduce engine component wear and extend service life.

13

2

Share

What causes the humming noise when the air conditioning is turned up in a BMW F18?

The reasons for the humming noise when the air conditioning is turned up in a BMW F18 are as follows: Faulty temperature regulator: When the car is in normal idle state, the humming noise may be caused by the operation of the electric fan used for radiator cooling. However, this noise is intermittent. If the humming noise persists, it may be due to a faulty temperature sensor or temperature regulator. The owner should promptly inspect it to avoid abnormalities during driving, which could lead to more severe car malfunctions and financial losses. Excessive gap between piston and cylinder wall: The humming noise at low speed or during gear changes is generally caused by an excessive gap between the piston and cylinder wall. This can occur if the assembly is too tight during installation or due to abnormal wear. Another possible cause is engine knocking. In the early stages of engine knocking, a humming noise may be heard, which could be caused by advanced ignition timing or excessive carbon deposits in the cylinders leading to knocking.

17

0

Share

What brand of engine oil is suitable for the Teana?

The original factory engine oil brand for the Teana is Shell, which produces a fully synthetic oil with the specification 5W-30-SN. The Teana 2.0T and 2.0L models use synthetic oil with the specification 5W30 (4L), and the oil change interval is 5,000 kilometers. If you wish to change the oil during later maintenance, you can choose from brands such as Mobil, Castrol, Great Wall, Tongyi, or Kunlun. The official manual recommends using fully synthetic oil with the specification 5W-30-SN for the Teana. The Teana can also use fully synthetic oils with specifications 0W-30, 5W-30SN, and 0W-40SN, as long as the oil meets the SAE-certified grade. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, where 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The second number represents the kinematic viscosity of the oil at 100°C, with higher values indicating better viscosity retention at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Teana is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan. Loosen the oil drain plug with a wrench and use an oil pan to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain. Remove the oil filter with a specialized wrench. Apply oil to the seal of the new oil filter and tighten it clockwise by hand. Add the new oil through the filler cap on the engine valve cover, typically filling about three-quarters of a 4-liter bottle. Start the engine and let it run for 5 minutes, checking for leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs. After stopping the engine, pull out the dipstick to ensure the oil level is within the standard range.

19

2

Share

What are the symptoms of a faulty electronic water pump in a BMW 740?

If the electronic water pump in a BMW fails, it can directly cause the engine to overheat, and in some cases, the engine may not start at all. Additionally, a warning light will appear on the dashboard. Introduction to Electronic Water Pump: An electronic water pump uses piezoelectric materials as its power device, achieving complete electronic control from operation to drive. It fully controls liquid transmission through an electronic integrated system, enabling adjustability and precision in liquid transfer, making it a new type of water pump. Features of Electronic Water Pump: The driving mode uses piezoelectric materials as the power device, revolutionizing the traditional motor-driven mechanism. It can precisely transport liquids, making it suitable for applications such as quantitative liquid transfer and control.

2

1

Share

Is Bugatti V16 or W16?

Bugatti's engine is a W16 engine composed of two V8 engines. Engine displacement: First, let's look at one of the most common engine parameters—engine displacement. Engine displacement is the total volume of all the cylinders in an engine, usually measured in liters (L). The cylinder displacement refers to the volume of gas swept by the piston from top dead center to bottom dead center, also known as single-cylinder displacement, which depends on the cylinder bore and piston stroke. Number of engine cylinders: Many novice car enthusiasts often see terms like "L4," "V6," "V8," and "W12" in the engine specifications of car data and wonder what they mean. These indicate the arrangement and number of engine cylinders. Common cylinder counts for car engines include 3, 4, 6, 8, 10, and 12 cylinders.

17

0

Share

What Does Auto Parts Mean?

Is the Geely Binrui's high and low beam integrated?

Does the Mercedes-Benz GLE450 Burn Engine Oil?

What causes the humming noise when the air conditioning is turned up in a BMW F18?

What brand of engine oil is suitable for the Teana?

What are the symptoms of a faulty electronic water pump in a BMW 740?

Is Bugatti V16 or W16?

Instructions for Using the GL8 Steering Wheel Function Buttons

How to Drive When There Are Vehicles on Both Sides at an Intersection?

How Should Vehicles Drive After Entering the Highway Lane?

What is the actual range of the Aion-LX?