···
Log in / Register

What does 91w tire mean?

4 Answers
MacPatrick
09/01/25 8:28am

91w tire indicates that the load capacity rating of the tire is 615kg, and the maximum speed rating is 270km/h. Under the corresponding load capacity of the relevant load index, each letter represents the maximum speed allowed by the tire. These two factors together are referred to as the service description, and they are interdependent. For various information parameters of tires, international standards require them to be marked on the tire sidewall, including the basic model parameters, load capacity rating, and speed rating of the tire. The basic model parameters of the tire can be directly interpreted through the marked numbers, but the load capacity rating and speed rating need to be checked against a reference table for corresponding parameters.

Was this review help?
14
3
Share
DelLilliana
09/14/25 4:05am

The 91W in tire specifications actually refers to two key indicators. 91 is the load index, indicating that the maximum load capacity of this tire is 615 kilograms, suitable for general passenger vehicles. W is the speed rating symbol, representing a maximum speed capability of 270 kilometers per hour, which is more oriented towards high-performance vehicles. When selecting tires, it's important to refer to the recommended specifications in the vehicle's manual, as mismatches can increase risks. For example, using the wrong speed rating can lead to overheating of the tire during high-speed driving, increasing the likelihood of a blowout or reduced grip, which is quite dangerous. From my experience, it's crucial to pay attention to tire maintenance during regular driving, including periodic checks on tire pressure and wear. In summer, when temperatures are high, the demands on the speed rating increase in hot environments, so it's advisable to choose tires that match the vehicle model. When replacing tires, don't just go for the cheapest option; high-quality tires, though more expensive, offer better safety.

Was this review help?
16
4
Share
Expand All
Gideon
10/28/25 4:48am

Seeing the 91W tire marking reminds me of my last tire replacement experience. The 91 in 91W indicates the load index, with a standard load capacity of 615 kg, suitable for most family sedans. The W represents the speed rating, allowing a maximum speed of 270 km/h, which is useful for highway driving. I often tell my friends not to overlook tire specifications, as choosing the wrong ones can affect handling and safety. For example, if the load index is too low, the tires can easily get damaged when the vehicle is overloaded. In winter, insufficient grip can lead to skidding on slippery roads. Before changing tires, it's best to check the manual or consult a professional to understand the recommended specifications for your vehicle. Regular checks of tread depth and tire pressure during daily driving can extend tire life and reduce accidents. Safety comes first—don’t skimp on costs.

Was this review help?
18
2
Share
Expand All
PaigeDella
12/11/25 5:04am

The 91W tire specification is quite straightforward. 91 represents the load index, indicating a maximum load capacity of 615 kilograms. W is the speed symbol, denoting a top speed of 270 kilometers per hour. These are standard parameters that should match the vehicle type when selecting tires. Commonly used for sedans, they ensure safety performance.

Was this review help?
3
4
Share
Expand All
More Forum Discussions

What lights should you turn on when driving in a heavy rainstorm?

When driving in heavy rain, turn on the headlights or front fog lights. Precautions for driving in rainy weather are as follows: 1. Turn on the wipers promptly; 2. If there is frost on the windshield, turn on the air conditioning and direct the cold air toward the windshield; 3. The driver should hold the steering wheel with both hands to maintain straight and low-speed driving, and brake gently to prevent the tires from locking up and causing the vehicle to skid; 4. Reduce the vehicle's speed, pay attention to the distance between the front and rear vehicles, and be mentally prepared to take emergency measures in advance. Car headlights, also known as car front lights or LED daytime running lights, should be maintained by: 1. Regularly checking the sealing of the headlights—if the sealing ring between the lens and reflector is damaged, replace it promptly; 2. Regularly cleaning the reflector—if it turns black and the brightness decreases, replace it; 3. Regularly removing dust and stains from the bulbs.
3
3
Share

What Causes Rough Gear Shifting in Automatic Transmissions?

Rough gear shifting in automatic transmissions may be caused by: transmission clutch pressure leakage; obstructed or sluggish transmission oil passages; insufficient or excessive transmission fluid levels; or damaged solenoid valves. The engine's power is transmitted through the transmission, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume over 10% more fuel than manual transmissions. Whether manual or automatic, transmissions with more gears tend to be more fuel-efficient. Below is relevant information: 1. Damaged solenoid valves: If sludge circulates within the transmission fluid and blocks the oil passages in the valve body, it can cause rough shifting. Over time, this can lead to a series of transmission issues such as overheating, impact, and slipping. 2. Incorrect transmission fluid levels: Verify whether the transmission fluid is at the standard level. Both insufficient and excessive transmission fluid can cause this issue. For vehicles equipped with a transmission dipstick, check whether the fluid level is within the standard range when the engine is running.
5
1
Share

Symptoms of a Faulty Thermostat in Jetta?

Jetta thermostat failure symptoms are as follows: 1. Thermostat malfunction with insufficient opening affects the engine's large and small circulation cycles, preventing effective heat dissipation and causing engine coolant temperature to rise; 2. Excessive thermostat opening leads to low engine coolant temperature, slow temperature rise, increased fuel consumption, and abnormal engine noises; 3. Thermostat sticking tends to cause carbon buildup, resulting in unstable engine idle speed and engine vibration. Below is how the thermostat works: 1. The thermostat is a valve controlling coolant flow path. It's an automatic temperature-regulating device typically containing temperature-sensing components that open/close air, gas or liquid flow through thermal expansion/contraction. 2. At normal temperature, the wax remains solid. When water temperature is below 76°C, the main valve closes completely while the bypass valve opens fully, allowing water from the cylinder head to directly enter the water pump via the bypass pipe (called small circulation). As water only flows between pump and water jacket without passing through the radiator and with small flow rate, the cooling intensity is weak.
14
3
Share

What Causes the Noise When Shifting Gears in an Automatic Transmission?

The reasons for noise when shifting gears in an automatic transmission are as follows: 1. Large valve clearance when the engine is cold: Poor lubrication can cause noise during gear shifting between cold and warm engine states, lasting about 3 minutes, but this is a normal phenomenon. 2. Issues caused by parking on a slope: If you engage the P (Park) gear before applying the handbrake when parking on a slope, the vehicle's weight will be entirely on the P gear due to inertia, leading to noise when shifting gears. However, if you apply the handbrake first, the handbrake will bear the weight, and no noise will occur. 3. Transmission problems: Wear and tear in the transmission, such as a loose driveshaft, worn differential, worn output shaft inside the transmission, worn transmission gears, or faulty shifting mechanism, require immediate attention. It is essential to visit a 4S shop or a professional auto repair shop for technician repairs.
19
5
Share

What are the vehicle warning lights?

There are ten main warning lights: 1. Oil pressure warning light: When illuminated, it indicates the engine oil level or pressure is below standard. Continued driving may cause severe engine wear due to lack of lubrication. 2. Coolant temperature warning light: Displays the temperature of the engine coolant. 3. Engine malfunction light: Shows the engine's operational status, typically in yellow. It lights up during ignition self-check and should turn off after starting. Persistent illumination indicates potential engine system issues. 4. Brake system warning light: If illuminated, first ensure the parking brake is fully released. If it remains lit, check brake fluid level or pad thickness. 5. Power steering warning light: Indicates malfunction in the power steering system. 6. Door/hood open warning light: Warns if doors or hood aren't properly closed. 7. Tire pressure monitoring light: Signals low tire pressure or possible tire damage. 8. Battery warning light: Usually yellow, it should turn off after self-check. 9. ABS warning light: Primarily yellow, failure to light during self-check or persistent illumination indicates potential ABS system faults. 10. Electronic stability control light: Normally indicates system deactivation when lit, and activation when off.
3
1
Share

Should the Foot Always Be on the Brake in an Automatic Transmission?

In an automatic transmission, the foot should not always be on the brake. It is best for the driver to keep the foot in the middle behind the brake and accelerator pedals. Below are specific details about the driver's foot placement: 1. Right Foot: The right foot should always be placed in the middle behind the brake and accelerator pedals. This makes it easier to step on the brake in case of an emergency and also facilitates acceleration. Tilting to the right is the accelerator pedal, while stepping straight down is the brake pedal. 2. Precautions: Do not use the left foot for braking and the right foot for acceleration, as this may lead to simultaneous pressing, wasting fuel and making operation difficult. 3. Correct Movement: The standard way to press the accelerator and brake is to pivot the heel of the right foot and rotate left or right to press, keeping the heel on the ground.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.