What does 9.8l/100km mean in terms of fuel consumption?

2 Answers
VonPeyton
07/24/25 11:43pm
9.8l/100km means the vehicle consumes 9.8 liters of fuel per 100 kilometers. Specific methods to reduce vehicle fuel consumption are introduced as follows: 1. Minimize vehicle weight: Keep the interior simple and avoid carrying unnecessary items. Every additional 1kg of load increases fuel consumption by 1%. 2. Avoid excessive modifications: Adding spoilers, protective covers, or rear wings can disrupt the original aerodynamic design, increasing wind resistance and consuming extra fuel. Modifying lighting systems increases electrical load, leading to unnecessary fuel consumption. 3. Develop good driving habits: Avoid sudden acceleration, driving at high speeds in low gears, prolonged idling, frequent lane changes or braking. Aim for smooth starts, consistent speed maintenance, and reduced braking.
Was this review help?
13
2
Share
LeKatherine
08/10/25 3:30pm
I've been driving for several years. This 9.8L/100km means your car consumes 9.8 liters of fuel per 100 kilometers driven, which is a fairly common figure. For regular sedans, it's not considered too high—economy cars can maintain around 6-8L, while SUVs may exceed 12L, so this level is moderately above average. Many factors affect it: stop-and-go city driving easily spikes fuel consumption; maintaining steady speed on highways can drop it below 9. Additionally, engine efficiency, tire pressure, and load play significant roles. I always pay attention to maintenance, regularly checking air filters and changing engine oil—these small actions help keep fuel consumption stable without increases. From a cost-saving perspective, this number matters a lot when fuel prices rise—about 1 yuan per kilometer, so I always calculate my budget before long trips. Don’t forget that harsh weather and AC use increase fuel consumption; I recommend gradually adopting smooth driving habits to save fuel.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

Reasons for Simultaneous Illumination of Audi ABS and Anti-Skid Warning Lights

The issue is caused by a malfunction in the vehicle's anti-skid system. Below are detailed explanations: 1. ABS System Malfunction: When the ABS system fails, the vehicle can still rely on conventional braking. If both the ABS warning light and brake system warning light illuminate simultaneously while driving, it indicates failures in both ABS and conventional braking systems. 2. Anti-Skid System Failure: When the vehicle's anti-skid system malfunctions, promptly visit an authorized 4S dealership or repair shop for inspection and maintenance to resolve the simultaneous illumination of ABS and anti-skid warning lights. It is advised not to continue driving when ABS fails, or alternatively, cautiously proceed to an auto repair shop using conventional braking at reduced speed, avoiding aggressive maneuvers. A faulty anti-lock braking system may also affect the ESP anti-skid system. Anti-skid system failure can lead to dangerous skidding during emergency braking or sharp turns.
7
3
Share

Can Electromagnetic Suspension Be Installed Afterwards?

Electromagnetic suspension is an original factory option, and 4S stores do not have the capability to install it, so it cannot be installed afterwards. Below is relevant information about automotive electromagnetic suspension: 1. Advantages of electromagnetic suspension: The device has a simple structure, extremely low power consumption, a wide range of controllable stress, and can achieve instantaneous precise control of damping force. It is also insensitive to impurities, has a wide working temperature range, and can operate between -50°C and 140°C. Electromagnetic suspension can be directly powered by a common low-voltage power source (such as a standard battery), avoiding the dangers and inconveniences associated with high-voltage power. Compared to traditional automotive shock absorbers, it has significantly fewer moving parts, almost no collisions, resulting in low noise. 2. Function of electromagnetic suspension: Vehicles equipped with electromagnetic suspension can increase tire contact with the ground even on the most rugged roads, reduce tire rebound, control the vehicle's center of gravity shift and pitch, maintaining vehicle stability. It also effectively controls body sway during sharp turns or evasive maneuvers.
8
4
Share

What is the fuel consumption of a 100kw diesel generator?

100kw diesel generator set fuel consumption is 21 kilograms, which is 26.25 liters. Factors affecting the fuel consumption of 100kw generator sets: 1. The fuel consumption of 100kw generators is generally related to two aspects, one is the fuel consumption rate of the unit itself, and the other is the size of the load. 2. Although the fuel consumption of diesel generator sets is sometimes proportional to the load, it is not proportional in all cases. The actual situation is that when the load is 80%, it is the most fuel-efficient. When the load of the diesel generator set is 80% of the rated load, one liter of oil generates 3.5 kWh of electricity. If the load increases, the fuel consumption will increase. However, if the load is less than 20%, it will affect the generator set, not only will the fuel consumption of the generator set increase significantly, but it may even damage the generator set.
8
1
Share

What does Audi A8 mild hybrid mean?

It refers to optimizations made during engine start-stop, acceleration, braking, and other driving conditions. Here are the specific details: 1. Hybrid system: The 48V mild hybrid system is not simply an upgrade from 12V to 48V, but rather an addition—retaining the original 12V system while incorporating a supplementary 48V mild hybrid system. 2. Benefits: The primary advantage of the 48V mild hybrid system lies in its optimization of engine start-stop, acceleration, and braking conditions, leading to significant fuel savings. The higher voltage enables a more powerful start-stop motor to effortlessly rotate the engine crankshaft, resulting in shorter system response times and reduced jerkiness, effectively addressing common pain points experienced by many seasoned drivers.
19
5
Share

What is the recommended tire pressure in summer and winter?

Summer tire pressure normal range: Generally, the lower limit of the standard tire pressure for car tires is acceptable. For example, the lower limit for standard tires is 2.4 bar. If the car is often parked outdoors, the tire pressure can usually be about 0.1 bar lower than the standard to avoid tire blowouts due to high temperatures. Winter tire pressure normal range: In winter, the tire pressure should be based on the standard tire pressure of the car tire, and can be appropriately increased by about 0.2 bar. Standard tire pressure for car tires: According to the regulations and requirements of the international GBT2978-2008 standard, the tire pressure for different tires is as follows: standard tires: 2.4-2.5 bar; reinforced tires: 2.8-2.9 bar; maximum pressure: should not exceed 3.5 bar.
5
1
Share

In which year was the Audi A8 launched?

The first generation of the Audi A8 was introduced in 1994. Here are the specific details: 1. Performance: The Audi A8 was the first to utilize an all-aluminum body, which is not only durable but also reduces the vehicle's weight, enhancing its performance. 2. Models: Currently, the Audi A8 offers 14 models across 4 engine displacements. These include two models equipped with a 2.5L V6 FSI direct injection engine, derived from reducing the displacement of the 2.8 FSI; seven models with a 3.0L V6 TFSI supercharged direct injection engine, available in two different power outputs; three models featuring a V-8 cylinder 4.0L V8 TFSI turbocharged direct injection engine; and two top-tier models with a 6.3L W12 FSI engine.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.