What does 20t on a car mean?

1 Answers
AshlynDella
07/30/25 12:42am
2.0T refers to the engine displacement. Introduction to car displacement: Introduction to car displacement: The space volume that the piston passes from the top dead center to the bottom dead center is called the cylinder displacement; if the engine has several cylinders, the sum of the working volumes of all cylinders is called the engine displacement. It is generally expressed in liters (L). Engine displacement is one of the most important structural parameters, which can represent the size of the engine better than the cylinder diameter and the number of cylinders. Many indicators of the engine are closely related to the displacement. Displacement classification: The classification of car levels in China is determined by the size of the displacement. The displacement of a mini car is less than or equal to 1.0L; the displacement of an ordinary car is in the range of 1.0-1.6L; the displacement of an intermediate car is in the range of 1.6-2.5L; the displacement of a mid-to-high-end car is in the range of 2.5-4.0L; the displacement of a high-end car is greater than 4.0L.
Was this review help?
1
3
Share
More Forum Discussions

How to Reset the Maintenance Light on a Nissan Sylphy?

Method to reset the maintenance light on a Nissan Sylphy: 1. Park the vehicle and start the engine. 2. Use the steering wheel's toggle buttons to switch the dashboard display to the maintenance settings interface. 3. Press and hold the "TRIP RESET" button on the center console until the data refreshes, and the tire pressure warning light will disappear. Introduction to the 2020 Nissan Sylphy: 1. Body dimensions: Length 4641mm, width 1815mm, height 1450mm, wheelbase 2712mm. 2. Powertrain: Equipped with a 1.6L engine, paired with either a 5-speed manual transmission or a CVT continuously variable transmission.
19
0
Share

How to Identify the Production Date of Michelin Tires?

To identify the production date of Michelin tires, look for the text on the sidewall of the tire that indicates the specific production date. The first two digits represent the week of production, and the last two digits represent the year. The functions of tires are: 1. To support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions; 2. To work together with the car suspension to cushion the impact during driving and dampen the resulting vibrations; 3. To prevent severe vibrations and early damage to car components, adapt to the high-speed performance of the vehicle, and reduce driving noise; 4. To transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the vehicle's power, braking, and passability.
1
3
Share

What are the causes of transmission noise in the Buick Excelle?

Buick Excelle transmission noise is caused by: 1. Bearing wear and damage; 2. Abnormal gear meshing clearance; 3. Gear tooth surface metal peeling, tooth breakage, or assembly misalignment; 4. Insufficient lubrication due to lack of lubricating oil; 5. Water ingress into the transmission; 6. Loose housing bolts; 7. Excessive clearance between the shift lever and shift fork groove in manual transmissions; 8. Long-term failure to replace transmission fluid. Taking the 2020 Buick Excelle as an example, its body dimensions are: length 4468mm, width 1765mm, height 1469mm, wheelbase 2611mm, fuel tank capacity 40l, and curb weight 1070kg.
9
4
Share

How to Reset the Maintenance Light on Volkswagen Touran?

Method to reset the maintenance light on Volkswagen Touran: 1. Turn off the ignition switch to shut down the vehicle. 2. Press and hold the "0.0" button with your left index finger. 3. While keeping the "0.0" button pressed, use your right hand to turn on the ignition switch. Continue holding the "0.0" button until the English letters for maintenance service appear on the dashboard, then release the button. 4. After releasing, press the "0.0" button again within 30 seconds. 5. The maintenance indicator light reset is now complete. Introduction to Volkswagen Touran: 1. Body dimensions: Length, width, and height are 4527mm, 1829mm, and 1659mm respectively, with a wheelbase of 2791mm. 2. Powertrain: The entire lineup is equipped with a 1.4-liter turbocharged engine, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. The maximum power is achieved at 5000 rpm, and the maximum torque is available between 1750 and 3000 rpm.
7
0
Share

Where is the computer interface of the Peugeot 408 located?

The computer interface of the Peugeot 408 is located inside the instrument panel cover below the buttons on the front left side of the driver's seat. Open the cover to find a connector, which is the computer interface. The computer interface can monitor the engine's electronic control system and other functional modules of the vehicle during operation. By connecting the car's computer interface to a computer, you can view real-time car data, detect faults, and facilitate car repairs, development of car-related functions, and modification of car equipment. Taking the 2020 Peugeot 408 Fun Edition as an example, its body dimensions are: length 4750mm, width 1820mm, height 1488mm, with a wheelbase of 2730mm, a fuel tank capacity of 53 liters, and a trunk capacity of 455 liters.
17
1
Share

What does it mean when the car engine light is yellow?

The reasons for a yellow car engine light are as follows: 1. Poor quality or substandard gasoline: This leads to incomplete combustion of the air-fuel mixture during engine operation, causing the engine fault light to illuminate. 2. Oxygen sensor malfunction: Damage to the oxygen sensor or its connector, or loosening, can result in a mixture that is too lean or too rich. 3. Airflow sensor malfunction: The ECU will not receive the correct intake air signal, preventing proper fuel control, leading to a mixture that is too lean or too rich and causing the engine to malfunction. 4. Spark plug carbon buildup: This causes poor engine performance, resulting in difficulties starting, unstable idling, poor acceleration, backfiring during sudden acceleration, excessive exhaust emissions, increased fuel consumption, and other abnormal phenomena. 5. Engine knocking: The immense impact force generated by combustion opposes the direction of piston movement, causing engine vibration. 6. Coolant temperature sensor damage: If the coolant temperature sensor fails to indicate a cold engine state, the air-fuel ratio will become too lean, leading to abnormal engine operation. Similarly, if it indicates a cold engine state after warming up, the air-fuel ratio will become too rich, also causing abnormal engine operation. 7. Engine misfire: An engine misfire can lead to excessive fuel consumption, black smoke emission, poor acceleration, severe shaking, increased engine noise, and a higher likelihood of stalling.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.