···
Log in / Register

How to Reset the Maintenance Light on a Nissan Sylphy?

1Answers
MaliaMarie
07/24/2025, 01:42:01 PM

Method to reset the maintenance light on a Nissan Sylphy: 1. Park the vehicle and start the engine. 2. Use the steering wheel's toggle buttons to switch the dashboard display to the maintenance settings interface. 3. Press and hold the "TRIP RESET" button on the center console until the data refreshes, and the tire pressure warning light will disappear. Introduction to the 2020 Nissan Sylphy: 1. Body dimensions: Length 4641mm, width 1815mm, height 1450mm, wheelbase 2712mm. 2. Powertrain: Equipped with a 1.6L engine, paired with either a 5-speed manual transmission or a CVT continuously variable transmission.

Was this review help?
119
Share
More Q&A

What to Do When the Engine Malfunctions and the Car Shakes?

When the engine malfunctions and the car shakes, for safety reasons, you should immediately stop the car, call for a tow truck, or wait for assistance. There are three main reasons why a car shakes due to engine malfunction: 1. Poor combustion of the air-fuel mixture in the engine. When the mixture in the cylinder is too rich, the vehicle may experience knocking, shaking, and other symptoms. 2. Malfunction in the spark plugs, high-voltage wires, or ignition coils. If the ignition system is not working properly or the spark plugs are misfiring, it can cause the engine warning light to come on, leading to shaking and insufficient power. 3. Abnormal fuel supply pressure or a faulty intake pressure sensor. Incorrect fuel pump pressure or erroneous readings from the intake pressure sensor can also cause the car to shake.
105
Share

How is the chassis of the 2021 Teana?

The chassis of the 2021 Nissan Teana still isn't sporty, but it offers a decent sense of premium quality. The front MacPherson strut and rear multi-link independent suspension, combined with a comfortably tuned, soft, and resilient chassis setup, effectively filter out most of the minor vibrations on the road. Below are the specific details about the 2021 Teana: 1. Body Dimensions: The car measures 4901mm in length, 1850mm in width, and 1447mm in height, with a wheelbase of 2825mm. 2. Powertrain Configuration: The car is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 156PS, a maximum power output of 115Kw at 6000rpm, and a maximum torque of 197NM.
116
Share

What level is the BYD employee F3?

BYD employee F3 belongs to the engineer level. The following is a detailed introduction about BYD: 1. Historical background: BYD is a Chinese automobile brand, founded in 1995, mainly producing commercial and family cars as well as batteries. Starting with a team of over 20 people, it grew into the world's second-largest rechargeable battery manufacturer by 2003. In the same year, BYD Auto was established. BYD Auto follows a development path of independent research, independent production, and independent branding, committed to creating truly affordable cars for the people. The product designs incorporate advanced international trends while also aligning with Chinese cultural aesthetics. 2. Current models: BYD's main models currently on sale include the BYD F0, BYD F3, BYD S7, BYD Tang, BYD Song, BYD Qin, and BYD Han.
114
Share

Why does the Buick Excelle stall after starting?

There are generally three reasons for the Excelle stalling after starting: electrical circuit failure; component failure; and fuel system failure. Below are specific explanations for the Excelle stalling after starting: 1. Electrical circuit failure: This could be due to low-voltage power interruption while driving, causing the car to stall. In this case, you should mainly check the ignition and starter switch, as well as the fuse box. 2. Component failure: This issue is usually related to the ignition coil, capacitor, or electronic ignition module. The car may start initially but stall after a while, then start again and stall once more. 3. Fuel system failure: This could be due to a damaged fuel pump, ruptured fuel line, clogged carburetor fuel inlet, or an empty fuel tank. However, in such cases, the car can still be restarted, though it may be difficult.
101
Share

Why Are Stock Cars Not Good?

First, there is no clear legal definition of stock cars in China. The so-called 'cars that have been in stock for more than three months are considered stock cars' is just a concept within the automotive sales industry. Stock cars have the following disadvantages: 1. Long-term parking can cause deformation of the tires in contact with the ground, which can lead to premature tire wear and an increased risk of blowouts when driving later. 2. The fluids may deteriorate, and using them without knowing their condition may cause irreparable damage to the engine. 3. For vehicles parked for a long time, the battery may experience prolonged discharge, leading to premature failure. 4. Most vehicles are stored outdoors, where exposure to sunlight accelerates the aging of the paint and rubber seals, rain may cause moisture damage to electronic components, and dust can clog various cooling devices and drainage holes of the vehicle.
108
Share

What is the function of the button on the gear shift of the Buick Excelle?

The shift button is equivalent to the clutch of a manual transmission. The following are specific details about the Excelle: 1. Body dimensions: Its body length, width, and height are 4609mm, 1798mm, and 1486mm respectively, with a wheelbase of 2640mm, a fuel tank capacity of 44 liters, and a body weight of 1285kg. 2. Powertrain configuration: The 2021 automatic light hybrid entry-level Excelle features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.3t turbocharged engine, delivering a maximum horsepower of 163ps, a maximum power of 120kw, and a maximum torque of 230nm, paired with a 6-speed automatic manual transmission.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.