What documents are required for the Subject 3 driving test?

1 Answers
AshlynMarie
07/29/25 5:37pm
Subject 3 driving test requires the following documents: ID card, which must be a valid original ID card or a valid temporary ID card. Examination admission voucher, which should be printed in advance after successful online registration. Examination barcode. For those applying for a driver's license outside their registered residence, a valid original local residence permit is also required. Additional information about Subject 3 is as follows: 1. Subject 3: Also known as the road safety driving test, it is part of the motor vehicle driver's license assessment and refers to the road driving skills and safety and civilized driving knowledge test. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Content of Subject 3: Vehicle preparation, simulated light test, starting, driving in a straight line, gear shifting operations, changing lanes, parking by the roadside, driving straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving.
Was this review help?
10
5
Share
More Forum Discussions

What are the reasons for the car not moving when the transmission is engaged?

The reasons for the car not moving when the transmission is engaged are: clutch, transmission, and drive axle failures. It is advisable to promptly take the vehicle to a repair shop for inspection. Regular maintenance of the transmission can be performed in the future, including timely replacement of the transmission oil and filter. When changing the transmission oil, the interior of the transmission can also be cleaned. The main functions of the transmission are: 1. To change the transmission ratio, expanding the range of torque and speed variations of the driving wheels to adapt to frequently changing driving conditions, allowing the engine to operate under favorable conditions; 2. To enable the car to reverse while maintaining the same engine rotation direction; 3. To interrupt power transmission by using neutral gear, allowing the engine to start, idle, and facilitating gear shifting or power output.
17
1
Share

What to Do If the Car Roof is Dented by a Branch?

If a citizen's car is damaged or scratched by trees on the roadside, the owner can bring relevant documents to the landscaping department for registration and may eventually receive 95% compensation. If the car owner has collision insurance and the car is hit by a tree due to strong winds, the insurance company can provide up to 70% compensation.
2
2
Share

What Causes ETC Display Tag Failure?

ETC tag expiration is a common issue, primarily caused by users privately removing or relocating the OBU device, or due to the ETC electronic tag becoming loose and detached. Since ETC is vehicle-specific and has a protective interlock during installation, there is a push-button switch on the side that adheres to the car's front windshield. If this button is triggered twice consecutively, it will cause the ETC electronic tag to fail. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. A red light will briefly illuminate, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. ETC activation method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears after inserting and removing the card twice without attaching the electronic tag, this is normal and does not affect activation. Alternatively, press the button on top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth and open the corresponding mobile app (usually with a download QR code on the electronic tag). Navigate to the device activation interface. Click "Connect Device" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle's front to complete activation.
5
0
Share

How to Connect Bluetooth Audio Source in a 2013 Audi A4?

Enter the vehicle and press the one-touch start button, then select the Tel button option inside the car. Next, look at the central control screen in the car, where you will see several options. Click on the option to switch to the connection manager. Then, select "Connect Mobile Phone" to put the car's system into a connectable state. Now, take out your phone, open the Bluetooth option in the settings on your phone's home screen, enter the Bluetooth connection interface, and click to pair the Bluetooth signal.
2
2
Share

How to Open the Tow Hook Cover?

Many sedans have the tow hook location designed under the bumper, covered by a round or square cap. If it doesn't open when pressed, it may be due to long-term disuse and tightness. In this case, use a tool—find a small stick with a diameter smaller than the tow hook cover, wrap it with cloth to prevent damaging the car's paint. After prying it open, pull the tow hook cover outward to reveal the tow hook mounting position. Remember to carefully reattach the cover after removing the tow hook post-towing.
3
4
Share

How to Find the 30cm Mark for Meeting Oncoming Vehicles in Subject 3?

When you hear the parking instruction, turn on the signal light, observe the traffic situation, and after confirming it's safe, steer the wheel to the right. When the raised part of the wiper is about to coincide with the right line, immediately straighten the direction. When the raised part coincides with the road edge line, the distance is exactly 30 centimeters. When the front one-third of the car is about to coincide with the right line, the distance is exactly 30 centimeters. Different vehicles may vary, so familiarize yourself with the test vehicle in advance. Adjust the rearview mirror before getting in the car. When parking, observe the position in the right rearview mirror. When the front and rear door handles coincide with the road edge line, the distance is exactly 30 centimeters.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.