What documents are required for Subject 2 test?

2 Answers
RiverAnn
07/29/25 8:40am
For the Subject 2 test, you only need to bring your ID card. Below are the precautions for the Subject 2 test: 1. Mock test: The purpose of the mock test is to familiarize candidates with the test environment and allow the coach to point out areas where points are easily deducted. Therefore, the mock test is absolutely essential, and thorough preparation is the best way to face the challenge. 2. Relax: Dress comfortably before the test and be mentally prepared; pay attention to the key points when reversing into the garage, do not turn left or right; when parallel parking, ensure the rear wheels exceed the edge line of the garage, adjust the distance properly, remember to turn on the signal light and honk the horn. When making a sharp turn, judge the position accurately and turn the steering wheel decisively; when driving on a curve, make wide turns after entering the curve, maintain a steady speed, and avoid crossing any lines in all the above scenarios. 3. Signing: After the test, drive the car back to the starting position, sign to confirm, and then turn off the engine. 4. Bring your ID card: Make sure to bring your ID card to the test; without it, you cannot take the test. After all the preparation, don't let the absence of an ID card prevent you from taking the test. Additionally, ensure your phone is turned off during the test, as any activity from the phone will be considered cheating.
Was this review help?
3
1
Share
DelNova
08/11/25 6:15pm
Last time I took the Subject 2 test, the document part was quite simple. You must bring your original ID card - that's the most crucial. Staff will scan and check it at the entrance. If your ID is expired or lost, the test is ruined; I've seen people make a wasted trip. I suggest you verify your ID's validity the night before the test and put it in your carry-on bag to avoid last-minute panic. Also, bring your appointment SMS or printout - some test centers now cross-check these to prevent hassle. Actually, medical reports are usually processed through the system and may not be needed on-site, but bringing a copy doesn't hurt for peace of mind. In short, arrive early with complete documents to feel secure, then focus on your driving skills - that's the real deal. Never neglect this small but critical detail; slowing your progress over such things isn't worth it.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

Where are the positive and negative terminals of the Q5 battery located?

Audi Q5L battery positive and negative terminals are located above the connection between the engine and transmission. Here is relevant information: 1. Introduction: The battery is an essential part of a car, which can be divided into traditional lead-acid batteries and maintenance-free batteries. The structure of an automotive lead-acid battery mainly consists of positive (negative) plates, separators, electrolyte, case, connecting strips, and terminals. 2. Precautions: If a car battery is left unused for a long time, it will gradually self-discharge until it becomes unusable. Therefore, the car should be started periodically to recharge the battery. The density of the electrolyte should be adjusted according to standards based on different regions and seasons.
3
1
Share

Is the Bora a joint venture car or a domestic car?

The Bora is a joint venture car. Here are detailed introductions about the Bora: 1. Overview: The Bora is the first independently designed model by FAW-Volkswagen, hailed as a new car that "inherits and surpasses the classics." It has a wheelbase of 2610mm. The vehicle dimensions are 4523*1775*1467mm. 2. Others: The trunk capacity is 450 liters. The fuel consumption is 7.7 liters per 100 kilometers. The fuel tank capacity is 55 liters. The engine type is a turbocharged engine. The standard seating capacity is 5. The top speed is 200km/h. The seat material is leather. The drive type is front-wheel drive. The curb weight is 1315 kilograms. The body structure is a sedan.
5
3
Share

What does xdrive40i mean?

xdrive40i refers to BMW's intelligent all-wheel-drive system equipped with a 3.0T-320 horsepower L6 engine. The intelligent all-wheel-drive system can quickly change the torque distribution between the front and rear axles while the car is moving, providing the driver with more stable driving performance. Logo meaning: B.M.W. stands for Bavarian Motor Works. The colors and combination of the logo come from the coat of arms of Bavaria, where BMW is located. Brand honors: On December 18, 2018, the "2018 World's 500 Most Influential Brands" compiled by the World Brand Laboratory was announced, and BMW ranked 16th.
16
1
Share

What is the wading depth of the Trumpchi GS8?

The maximum wading depth of the Trumpchi GS8 is 700mm. The wading depth of the Trumpchi GS8 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Trumpchi GS8 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, be sure to turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water intake. Based on the conditions of the vehicle ahead, assess the underwater road conditions and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, or other reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route instead.
4
0
Share

What does the exclamation mark on the left side of the xrv mean?

xrv vehicles display several types of exclamation marks, as the specific graphic is not visible. Tire Pressure Monitoring Indicator: There is a horizontal line under a bracket, with small serrations at the bottom of the line and an exclamation mark in the middle. The entire icon is yellow. This indicator is the tire pressure monitoring light. When this light comes on, it indicates that the tire pressure in one of the car's tires is abnormal. You should stop as soon as possible to check if there are any abnormalities in the tires. If there are abnormalities, do not continue driving. If everything appears normal, still visit an auto repair shop for inspection as soon as possible. General Fault Indicator: A yellow triangular symbol with an exclamation mark in the middle. The entire icon is yellow. This indicator is the general fault warning light. When this light comes on, there can be many possible causes, such as poor contact or malfunction of external lights (parking lights, taillights, turn signals, rear fog lights, license plate lights, etc.), damaged wiring harness in the trunk, traction control system warning or malfunction, parking sensor failure, etc. Among these, the most common issues are brake light or license plate light failure. Automatic Transmission Fault Warning Light: A gear-shaped icon with an exclamation mark inside. The entire icon is yellow. This indicator is the automatic transmission fault warning light. When this light comes on, it indicates a fault in the transmission, transmission lubricant below the normal range, or the need to replace the lubricant.
19
0
Share

Why isn't the 15th-generation Crown coming to China?

Toyota's 15th-generation Crown may not be introduced to the Chinese market. The reason is quite straightforward: the 15th-generation Crown is a rear-wheel-drive product based on the TNGA rear-wheel-drive architecture. Currently, Toyota's domestic layout in China is focused on the TNGA front-wheel-drive architecture. Toyota's rear-wheel-drive architecture is only used in the Crown and Lexus lineup. If Lexus is not locally produced, Toyota will not specifically introduce the TNGA rear-wheel-drive architecture for the Crown. Below is a related introduction: 1. Exterior: As a luxury model, the 15th-generation Crown adopts a completely new design language, with an overall styling that is more youthful and sporty. The front face of the new car features a more exaggerated design language, with an oversized blackened mesh grille and an RS logo on the right side. The headlights on both sides are more aggressive, with sharp front angles that enhance visibility when lit. The angular bumper below, paired with the fog lights on both sides, presents a three-section design, giving the car a futuristic feel. 2. Dimensions: The 15th-generation Crown is built on Toyota's latest TBGA platform, with dimensions of 4910*1800*1455mm and a wheelbase of 2920mm. Compared to the current model, the height and width have been slightly reduced. The side profile features smooth lines, blackened B/C pillars, a fastback design, and multi-spoke alloy wheels, creating a strong sporty impression. 3. Interior: The 15th-generation Crown has undergone significant upgrades, with a strong emphasis on technology and luxury. It comes equipped with a three-spoke multifunction steering wheel, a digital instrument cluster, and a dual-screen design for the infotainment system. Below the lower screen are symmetrical air vents and some physical buttons. Standard features include 8 airbags, ESP, a rearview camera, one-touch start, keyless entry, and a full suite of active safety systems. 4. Powertrain: The 15th-generation Crown continues to use the current model's 2.0T engine and adds two hybrid systems: a 2.5L and a 3.5L V6. The 3.5L V6 hybrid system delivers a maximum power of 359 horsepower, while the 2.5L hybrid system produces 226 horsepower. The transmission is an 8-speed automatic, and some models come with an all-wheel-drive system.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.