What Documents Are Required for a Driver's License Renewal Medical Examination?

2 Answers
HannahAnn
07/29/25 7:05pm
For the driver's license renewal medical examination at the hospital, you need to bring your original ID card and a copy, a recent one-inch color photo with a white background, and the medical examination fee. Vision: For monocular vision impairment, the naked or corrected vision of the right eye must be 5.0 or above on the logarithmic visual acuity chart, with a horizontal field of vision reaching 150 degrees. Height: Height must be at least 150 centimeters. Color Vision: No red-green color blindness. Hearing: Both ears must be able to discern the direction of sound at a distance of 50 centimeters from a tuning fork. Limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact with normal limb and finger movement functions. Both lower limbs must be intact with normal movement functions, and the length difference between the lower limbs must not exceed 5 centimeters. For automatic transmission vehicles, the right limb must be intact. There should be no movement dysfunction in the limbs.
Was this review help?
6
0
Share
VonJoy
08/14/25 1:11pm
When I renewed my driver's license, the items for the medical check-up were crucial. I remember bringing the original ID card to the hospital, and also a photocopy for backup, as the DMV sometimes requires copies for their records. The original driver's license was also necessary since the old one was being replaced. Don't get the photos wrong—they must be one-inch white-background ID photos. I brought three extra copies just in case, as some places are strict. It's best to fast before the check-up, as the doctor will test your vision, hearing, and blood pressure. If you're nearsighted, wear your glasses in advance. The fee is about 50 yuan, payable in cash or by scanning a QR code, to avoid hassle. The whole process takes about half an hour, so it's advisable to go early to the designated hospital to avoid long queues. Bringing some water is also a good idea, as you might feel thirsty after the check-up.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

What causes the Jetta to lack power and not respond when the accelerator is pressed hard?

The car's power is abnormal, and the engine power is the result of the coordinated work of the intake system, ignition system, and fuel system. If any component malfunctions, it may lead to a decrease in engine power, resulting in a lack of acceleration and no response when the accelerator is pressed. Reasons for the car's lack of acceleration power: 1. Carbon deposits: Carbon deposits on the car's valves, idle motor, intake tract, combustion chamber, and spark plugs can cause the engine to stall when idling. 2. Poor fuel quality: Using low-quality fuel can affect the gasoline filter and fuel lines, potentially leading to poor fuel supply and resulting in weak acceleration. It can also impact the lifespan of the exhaust system's catalytic converter. If the catalytic converter is clogged, it will directly affect the vehicle's acceleration performance and increase fuel consumption, leading to a lack of acceleration power.
10
0
Share

What does it mean when the engine overheats and the AC turns off?

Engine overheating leading to AC shutdown is a normal engine high-temperature protection mechanism. Below are the specific impacts of engine overheating: 1. Reduced engine power: When driving in temperatures above 35°C, with a tailwind, or under heavy load at low speeds, engine overheating becomes more severe. This further decreases the engine's air charging efficiency, leading to reduced fresh air-fuel mixture entering the cylinders, lower mean effective pressure in the cylinders, and consequently, reduced engine power. 2. Increased fuel consumption: At excessively high engine temperatures, lubricating oil entering the cylinders tends to form carbon deposits under high-temperature and oxygen-deficient conditions. These deposits accumulate on piston crowns, combustion chamber walls, valve heads, and spark plugs, creating hot spots that can cause abnormal combustion. This may lead to deformation of the engine block and cylinder head, or even cracks and warping, as well as damage to the cylinder head gasket. The resulting decrease in cylinder pressure at the end of compression increases fuel consumption. 3. Accelerated component wear: High temperatures cause lubricating oil to oxidize and deteriorate. The resulting sludge and deposits adhere to piston rings, cylinder walls, and other friction surfaces, reducing heat transfer efficiency. The viscosity of the oil decreases, oil pressure drops, and lubrication performance deteriorates. Under impact loads, the strength of the oil film on cylinder walls weakens, accelerating component wear.
16
1
Share

What brands are under Ford?

Ford owns two automotive brands: Ford and Lincoln. Taking the 2019 Ford Kuga as an example, it is a compact SUV with body dimensions of 4524mm in length, 1838mm in width, and 1685mm in height, a wheelbase of 2690mm, a fuel tank capacity of 60 liters, and a curb weight of 1592kg. The 2019 Ford Kuga features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 182PS, a maximum power of 134kW, and a maximum torque of 245Nm, paired with a 6-speed automatic transmission.
15
1
Share

Does modifying a car with one-button start have any impact?

Modifying a car with one-button start has an impact and poses safety risks. The functions of one-button start include: 1. Automatic unlocking; 2. Automatic locking; 3. Automatic window closing; 4. Automatic anti-theft; 5. One-button start; 6. One-button shutdown. The method of using one-button start is: 1. Open the car door and sit inside; 2. Press the brake; 3. Press the start button to complete the one-button start. The working principle of one-button start: It uses radio frequency identification (RFID) technology to automatically lock and unlock doors through the chip in the smart card. When the owner approaches the vehicle, the system automatically recognizes the owner's identity, unlocks the doors, and disables the anti-theft system without the need for a key.
20
3
Share

What are the reasons for the engine fault light being on when the engine is not started?

Engine fault light being on when the engine is not started is caused by: 1. Poor gasoline quality leading to incomplete combustion of the air-fuel mixture in the cylinder, resulting in carbon deposits; 2. Excessive engine mileage causing weakened spark plug performance; 3. Mechanical aging of the vehicle; 4. Damage, poor contact, or signal interruption of the water temperature sensor, crankshaft position sensor, air flow sensor, intake air temperature sensor, or oxygen sensor. The solutions for the engine fault light being on when the engine is not started are: 1. Clean the engine carbon deposits; 2. Change to higher quality gasoline; 3. Replace the spark plugs. The function of the engine is: to convert the thermal energy of gasoline into mechanical energy by burning the expanding gas in a sealed cylinder to push the piston to do work.
9
0
Share

Is Lynk & Co a Domestic or Imported Car Brand?

Lynk & Co is a premium luxury brand under Geely, and the vehicles under this brand are domestically produced. It is an independent brand with a range of sedans and SUVs. The Lynk & Co lineup includes the 03 sedan and SUVs such as the 01, 02, and 05. The 03 also has a high-performance variant known as the 03+. Below are the details about the Lynk & Co 03: 1. Detail One: The standard version of the Lynk & Co 03 is equipped with two engines—a 1.5-liter turbocharged three-cylinder engine and a 2.0-liter turbocharged four-cylinder engine. 2. Detail Two: The high-performance variant uses a 2.0-liter turbocharged engine that delivers 254 horsepower and 350 Nm of maximum torque. This engine reaches peak power at 5,500 rpm and maximum torque between 1,800 and 4,800 rpm. It features direct fuel injection and an aluminum alloy cylinder head and block, paired with an 8-speed automatic transmission (8AT). 3. Detail Three: The standard 2.0-liter turbocharged engine produces 190 horsepower and 300 Nm of maximum torque, achieving peak power at 4,700 rpm and maximum torque between 1,400 and 4,000 rpm. It also includes direct fuel injection and an aluminum alloy cylinder head and block, mated to a 6-speed automatic transmission (6AT). 4. Detail Four: The Lynk & Co 03 features a MacPherson strut front suspension and a multi-link independent rear suspension.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.