···
Log in / Register

How long do I have to wait after failing the second attempt at Subject 2?

6Answers
McClaire
08/27/2025, 02:28:17 AM

After failing the second attempt at Subject 2, you need to wait for ten days before you can schedule a make-up test. Below is relevant information about Subject 2: 1. Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination. It is the abbreviation for the field driving skills test. The test items for cars (C1/C2) include five mandatory components: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns). Some regions also include a sixth item: high-speed toll card collection. 2. Teaching materials: "Safe Driving Starts Here," compiled by the Ministry of Transport of the People's Republic of China. 3. Teaching objectives: Master the basic essentials of driving operations, acquire fundamental vehicle control skills, and become proficient in basic methods of field and road driving.

Was this review help?
119
Share
OJulianna
09/09/2025, 01:18:05 AM

When I took my driving test back then, I also failed the second subject twice. After failing the second time, I had to wait 7 to 10 days before I could reschedule the test, which wasn’t too long. You can use this time to reflect on your mistakes, such as common challenges like reverse parking or hill starts, and practice more at the driving school or ask your instructor for targeted tips. Don’t rush to retake the test—steady progress is more important. I passed on my third attempt by staying calm and not letting nerves affect my performance. While waiting, you can also watch online tutorial videos to review the test procedures, which can significantly improve your chances next time. Remember, failure is common, and with patient preparation, you’ll surely pass.

Was this review help?
3
Share
Expand All
VanElliott
10/23/2025, 02:09:18 AM

Sigh, I failed my second attempt at Subject 2 (driving test). After asking around, I found out I have to wait about 7 days before retaking it—so frustrating. Don’t waste this time; head to the driving school and practice more, especially on the tricky parts like parallel parking or curve driving. You could also book a mock test to get familiar with the exam environment. Don’t be too discouraged—my friend was in the same boat and passed on their third try. Use this waiting period to adjust your mindset, watch some relaxing videos to unwind, and stay confident. There’ll be plenty of chances next time.

Was this review help?
17
Share
Expand All
DeJuliet
12/06/2025, 01:32:56 AM

Based on experience with trainees, the waiting period after failing the subject 2 test for the second time is typically 7 to 10 working days. I recommend using this time to strengthen your practice on weak areas, such as reverse parking or right-angle turns, by simulating the test scenario multiple times. Don't stress; practice makes perfect.

Was this review help?
2
Share
Expand All
DelaneyLynn
01/26/2026, 02:52:14 AM

According to the driving test regulations, after failing the second attempt in Subject 2, you must wait at least 7 working days before retaking the exam, subject to the local DMV's schedule. You can check and schedule the retest time through the Traffic Management 12123 app. Use the waiting period to ensure your skills are proficient, review key test points, and avoid making mistakes again.

Was this review help?
4
Share
Expand All
SerenityLynn
04/22/2026, 01:17:00 AM

After failing the second driving test (Subject 2), there's typically a waiting period of about 7 days. Don't lose heart—this is a normal part of the process. Use this time to relax, discuss experiences with friends, or review techniques through instructional videos. Maintain a positive mindset, prepare well, and you'll surely succeed next time.

Was this review help?
13
Share
Expand All
More Q&A

Why does the Buick Envision transmission have a jerky feeling?

It is normal for the Buick Envision transmission to have a jerky feeling. The jerky transmission refers to the dual-clutch transmission in the 20t model, while the AT transmission in the 28t model has very minimal jerkiness. During low-speed driving, the dual-clutch transmission may exhibit jerking, which is a normal phenomenon. The Buick Envision is a midsize SUV under the Buick brand, equipped with two types of transmissions. The 1.5-liter turbocharged engine is paired with a 7-speed dual-clutch transmission, while the 2.0-liter turbocharged engine is matched with a 9-speed automatic transmission. The dimensions of the Buick Envision are 4667mm in length, 1839mm in width, and 1694mm in height, with a wheelbase of 2750mm.
108
Share

How to Remove the Car Door Interior Panel?

Method for removing the car door interior panel: There are clips inside the panel. Press the clips, then insert a flat-head screwdriver along the lower edge of the panel to remove each clip individually. Special tools are required for the removal and installation of the interior panel to protect the connecting bolts and door trim from damage. Ensure all wires are disconnected to prevent them from being pulled out. During installation, adjust the gaps according to the required specifications and ensure the door opens and closes properly. The door trim is a decorative panel structure for the door, including the interior panel and triangular trim panel. The back of the triangular trim panel is directly injection-molded with at least two round posts. Corresponding installation holes are located on the interior panel where the posts align. Nylon retaining rings are placed over the installation holes, and the triangular trim panel is secured to the interior panel through an interference fit between the posts and the nylon rings.
110
Share

How much engine oil should be added to the Roewe RX5?

Roewe RX5 requires 4 to 5 liters of engine oil. When adding oil, observe the dipstick to ensure the oil level reaches slightly above the middle mark, which is the appropriate level. Engine oil, also known as engine lubricant, serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. The Roewe RX5 is a compact SUV launched by SAIC Motor, with dimensions of 4571mm in length, 1855mm in width, and 1719mm in height, and a wheelbase of 2708mm. It is equipped with a 1.5T turbocharged engine delivering a maximum power of 127kw and a maximum torque of 275nm, paired with a 7-speed dual-clutch transmission.
114
Share

How to Turn Off ABS?

ABS cannot be manually deactivated or turned off in regular vehicle models, but it can be disabled in some high-performance models. By selecting the drift mode in the driving mode options, the ABS anti-lock braking system will be turned off. In high-performance cars, the so-called deactivation of the ABS anti-lock braking system mostly only applies to the rear wheels, as locking the front wheels would prevent steering. The primary function of the ABS system is to prevent wheel lockup and loss of directional control, rather than to shorten braking distance. It can be understood that ABS intervenes whenever there is a tendency for the wheels to lock up. Without the assistance of the ABS system, if the wheels lock up during braking, the rolling friction between the wheels and the ground turns into sliding friction, making it impossible to control the wheel direction with the steering wheel, which could lead to an accident.
112
Share

How to Eliminate the Persistent Illumination of the Motorcycle Malfunction Light?

Methods to eliminate the persistent illumination of the motorcycle malfunction light: It can only be cleared using a professional diagnostic computer; owners cannot clear it themselves. Reasons for the motorcycle malfunction light to illuminate: 1. Poor connection from the generator excitation winding lead-out terminal through the brush to the regulator; 2. Poor connection from the generator stator three-phase winding lead-out terminal through the diode, neutral point to the regulator; 3. Poor connection of the indicator light, switch, regulator, and battery wiring. Before riding the motorcycle, turn on the ignition switch to start the engine. At this time, the charging indicator light serves as a power indicator light; after the engine starts and enters idle operation, the charging indicator light should go off or flicker slightly, indicating that the motorcycle's charging system is working normally. If the charging indicator light does not go off at this time, it indicates a fault in the charging system, which should be addressed immediately.
102
Share

What is the displacement of the Mercedes-Benz C200L?

The displacement of the Mercedes-Benz C200L is 1.5T and 2.0T. More details about the Mercedes-Benz C200L are as follows: 1. Interior: The new C-Class is equipped with a three-spoke steering wheel that offers a solid grip and a sporty design. The function buttons are arranged in a user-friendly manner, and the inclusion of paddle shifters enhances the driving experience. The large central display can show conventional vehicle information and also features an ECO interface to improve driving habits. 2. Powertrain: It is powered by a 2.0T turbocharged engine with the code name M274, featuring camtronic variable valve lift technology. The engine delivers a maximum power of 135KW at 5500rpm and a peak torque of 300N•m between 1200-4000rpm. It is paired with a 7-speed automatic transmission with a column-mounted shifter design and is equipped with paddle shifters.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.