···
Log in / Register

What documents are needed to apply for a Beijing Entry Permit?

3 Answers
GrahamRose
09/07/25 6:28am
To apply for a Beijing Entry Permit, you need to carry the following supporting documents: the driver's identity card, the driver's motor vehicle driving license, the motor vehicle registration certificate, a valid compulsory traffic accident liability insurance certificate for motor vehicles, a valid motor vehicle safety inspection compliance mark, and a certificate confirming that the vehicle meets environmental protection requirements as verified by the local environmental protection authority. Here are some important notes for applying for a Beijing Entry Permit: Time limit: The initial application for a Beijing Entry Permit is valid for 7 days. Subsequent renewals are valid for 5 days each, with no limit on the number of applications per month. Application requirements: The applicant (not necessarily the vehicle owner) must bring their driving license, ID card, motor vehicle registration certificate, compulsory traffic insurance, and environmental protection certificate. During the application process, staff will verify whether the applicant matches the submitted identity proof and driving license. If they do not match, the application will be denied.
Was this review help?
8
4
Share
DeJohnny
09/19/25 5:40am
The documents required for applying for a Beijing entry permit are actually quite simple. I remember you must bring your ID card, which serves as proof of personal identity, as well as your driver's license to confirm your driving qualification, and the vehicle registration certificate, which is the car's proof of registration. Last year when I entered Beijing, I encountered quite a few issues due to incomplete documents and had to make a wasted trip. Later, I got into the habit of making appointments via a mobile app, which saves both time and effort. Out-of-town vehicles also need to prepare an environmental inspection report, otherwise they might not pass. I personally recommend getting it done a week in advance, as there are huge crowds during peak times. It's a good idea to scan these documents and keep electronic copies, and also keep photocopies in the car as backup. If you forget them, you'll have to make another trip, which can delay your plans, especially when you're in a hurry. I often teach my friends to handle it this way, and it's always been hassle-free. Overall, having these three documents prepared should be sufficient.
Was this review help?
7
0
Share
Expand All
LeAlyssa
11/02/25 6:02am
I believe the key documents for applying for a Beijing Entry Permit are three: ID card, driver's license, and vehicle registration certificate. The ID card is used to verify the owner's identity, the driver's license proves your driving ability, and the vehicle registration certificate demonstrates the vehicle's legality. As someone who frequently handles automotive matters, I recommend bringing the insurance policy as well, as inspectors sometimes request it. The validity period of the documents is crucial—don't let them expire and become invalid. The application process can be done at the vehicle management office or via an app, with the latter being more efficient. This is similar to car maintenance—don't overlook the small details. I've seen many car owners complain about being denied due to missing one document, leading to extra queuing. Check all materials in advance to get it done in one go and save hassle. Also, don't forget the environmental label, especially for out-of-town vehicles. Overall, the procedure is straightforward but strict—having everything ready ensures a smooth entry into the city.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

How to Check the Year of a Vehicle Identification Number?

Methods to check the year from a vehicle identification number: In most standard VINs, the 10th digit represents the year. You can typically find the VIN on the vehicle's registration certificate, the engine's nameplate, or the driver's side door. The VIN is a 17-character code, commonly referred to as the '17-digit code,' which contains information about the vehicle's manufacturer, year, model, body type, engine code, and assembly location. Correctly interpreting the VIN is crucial for accurately identifying the vehicle model and performing proper diagnostics and maintenance. There are two main VIN formats: the first follows the ISO 3779 standard used by the European Union, and the second is primarily used in North America.
12
5
Share

What are the symptoms of engine cylinder scuffing?

Vehicle cylinder scuffing symptoms include weak driving performance, difficulty in acceleration; elevated engine coolant temperature; unstable engine RPM operation accompanied by signs of stalling. Engine cylinder scuffing refers to the appearance of distinct longitudinal mechanical scratches and abrasions on the inner wall of the cylinder within the piston ring's movement range. In severe cases, adhesive wear occurs, leading to difficulties in engine starting or spontaneous stalling. Cylinder scuffing constitutes a major engine failure, fundamentally caused by the inability to form an oil film between the cylinder wall and piston rings/piston, resulting in poor lubrication or even dry friction. Specific causes of engine cylinder scuffing vary but generally fall into three categories: 1. Piston assembly-related causes; 2. Cylinder liner-related causes; 3. Operational usage-related causes.
2
4
Share

What is the reason for the idle speed still being 1000 RPM after warming up the car?

The reason for the idle speed still being 1000 RPM after warming up the car is due to factors such as the idle switch not being closed. Below are related introductions about hot idle speed: Introduction to specific reasons: The most common issue is a malfunctioning idle control valve. If the idle control valve is faulty, it not only increases the RPM but also causes unstable speed. When such problems occur, it is essential to promptly check at a repair shop; otherwise, it can lead to a significant increase in vehicle fuel consumption. Introduction to the benefits of warming up the car: Reduces the engine's RPM; adjusts the car's state for adaptation; improves issues with the three-way catalytic converter, enhancing emissions.
14
2
Share

Does OBD Tire Pressure Monitoring Cause Damage to the Car?

OBD tire pressure monitoring does not cause damage to the car. OBD tire pressure monitoring uses an indirect method to detect tire pressure, which does not require disassembling any original car components. Instead, it utilizes the car's ABS data to determine the tire's condition. Tire pressure monitoring automatically and continuously checks the tire pressure while the car is in motion, alerting the driver in case of air leakage or low pressure to ensure driving safety. There are three common types of tire pressure monitoring systems: Direct Tire Pressure Monitoring: This system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure data is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors the tire pressure. Indirect tire pressure monitoring systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both direct and indirect systems. It is equipped with direct sensors in two diagonally opposite tires and includes a four-wheel indirect system. Compared to a full direct system, this hybrid system reduces costs and overcomes the limitation of indirect systems, which cannot detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as a direct system does.
5
3
Share

What is the lowest temperature setting for car air conditioning?

Generally speaking, the lowest temperature setting for car air conditioning is around 10 degrees Celsius, and it also depends on the effectiveness of the car's air conditioning refrigerant. The cooling limit for most car air conditioning refrigerants is 10 degrees Celsius. The functions and usage recommendations of car air conditioning: The air conditioner can control the temperature inside the car, both heating and cooling the air to maintain a comfortable level. It can also remove humidity from the air. The ideal temperature setting for car air conditioning is between 18 to 25 degrees Celsius, with a temperature difference of no more than 10 degrees between the inside and outside of the car. The comfortable temperature range for the human body is 20 to 25 degrees Celsius. Above 28 degrees, people may feel hot, while below 14 degrees, they may feel cold. Car air conditioning engineers suggest setting the air conditioning to 21 to 25 degrees Celsius in summer and 25 to 28 degrees Celsius in winter. They also recommend that the temperature difference between the inside and outside of the car should not be too large to avoid discomfort for passengers. Typically, the temperature difference should be within 10 degrees for cars and 8 to 12 degrees for large buses. Classifications of car air conditioning: By throttling device and system structure: expansion valve refrigeration system, expansion tube refrigeration system. By driving method: non-independent air conditioning system, independent air conditioning system. By function: separate heating and cooling system, combined heating and cooling system, full-function system. By control method: manual air conditioning system, semi-automatic air conditioning system, fully automatic air conditioning system. By compressor displacement: fixed displacement air conditioning system, variable displacement air conditioning system.
6
3
Share

How to Activate the Automatic Emergency Braking in IZOA?

IZOA's automatic emergency braking feature does not require additional setup as it is enabled by default from the factory. When the vehicle speed exceeds 30 km/h, the system will activate. If the front radar detects an obstacle ahead, the system will automatically apply the brakes to ensure the safety of passengers. The IZOA is a compact SUV launched by FAW Toyota in May 2018. In November 2018, Toyota introduced additional variants of the IZOA, which continue to be powered by the same 2.0L naturally aspirated engine with a maximum output of 126kW. This engine features a compression ratio of 13:1 and a thermal efficiency of up to 40%, delivering a peak torque of 203Nm, paired with a Direct Shift-CVT transmission.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.