How to Activate the Automatic Emergency Braking in IZOA?

[BeckettRose]

IZOA's automatic emergency braking feature does not require additional setup as it is enabled by default from the factory. When the vehicle speed exceeds 30 km/h, the system will activate. If the front radar detects an obstacle ahead, the system will automatically apply the brakes to ensure the safety of passengers. The IZOA is a compact SUV launched by FAW Toyota in May 2018. In November 2018, Toyota introduced additional variants of the IZOA, which continue to be powered by the same 2.0L naturally aspirated engine with a maximum output of 126kW. This engine features a compression ratio of 13:1 and a thermal efficiency of up to 40%, delivering a peak torque of 203Nm, paired with a Direct Shift-CVT transmission.

[McAdeline]

To activate the IZOA's automatic emergency braking function, first sit in the driver's seat and start the engine. Then locate the menu button on the left side of the steering wheel and press it. Rotate the selection dial to the settings option and click to enter the safety system menu. Next, find the Pre-Collision System (PCS) setting and toggle the switch to activate automatic braking. I recommend regularly checking sensor cleanliness as dust or dirt can interfere with radar detection. This feature operates automatically at speeds between 30-180 km/h, helping you avoid rear-end collisions in traffic jams or on highways. After using it, I found it particularly effective on slippery roads, but don't rely entirely on the system as occasional weather changes may cause misjudgments. During routine maintenance, check for software updates to ensure optimal system performance. Remember the sensitivity is adjustable - typically set to medium by default, but you can lower it when driving on rough roads to reduce false triggers. Automatic emergency braking is a crucial safety tool, so never overlook the importance of its regular maintenance.

[Lois]

I've been driving for twenty years, and the active braking feature in the C-HR is very intuitive to activate: after starting the engine, press the function button on the steering wheel to switch to the vehicle information screen, use the selector to scroll to the safety function settings, and turn on the pre-collision system switch. This feature is based on radar technology and can automatically brake when detecting a dangerous distance from the vehicle ahead. I find it most helpful in crowded urban areas and on highways, reducing the risk of sudden incidents. Keep the front windshield camera area clean, and don’t turn it off in rain or snow. Keep the sensors clean to avoid false activations, and if you notice any malfunction, contact a service center immediately. It’s recommended that drivers check the system’s activation status before each use, forming a habit to ensure safety. Safe driving isn’t just about skill—it also requires the cooperation of active safety features.

[LaStella]

As a C-HR owner, I use the automatic emergency braking system daily: After starting the engine, press the vehicle icon on the center display to enter settings, select the Safety tab, and toggle on the Pre-Collision System. Once activated, it automatically detects obstacles ahead and applies brakes within certain speed ranges - perfect for beginners or busy driving situations. I appreciate its simple operation requiring no additional devices. The sensors are located near the emblem - remember to clean them during car washes. The sensitivity is adjustable; I set it to medium to avoid false alarms in urban areas. It's particularly helpful when driving in rain - don't disable it lightly. Remember this isn't a magic solution; combining it with your own observation enhances protection.

[KevinLynn]

Years of car repair experience tell me the activation method for the IZOA's autonomous emergency braking: After starting the vehicle, enter the dashboard menu, navigate to user settings, and enable the pre-collision safety function for it to work. The system relies on the coordination of radar and cameras, issuing a warning before applying brakes when a collision risk is detected. I recommend starting with basic settings to prevent false triggers. I also suggest familiarizing yourself with the system's limitations, such as speed restrictions and visibility impacts; keep the radar surface clean to ensure high accuracy. If the system reports an error, use a diagnostic tool to reset it or consult the manual. Daily maintenance of safety features is crucial—don't neglect it.

[Myrtle]

As a safety-conscious driver, here are the steps to activate the C-HR's pre-collision system: After starting the car, use the directional keys to enter the settings menu, locate the safety options, and turn on the PCS switch. This technology can automatically decelerate to prevent collisions but requires proper usage; I found it quite effective during rainy and foggy conditions on highways. Be mindful of dirt accumulation on sensor positions which may cause malfunctions - clean them promptly. Lowering the sensitivity helps avoid false reactions. While the system is convenient, don't over-rely on it - maintaining alertness while driving is more crucial. Remember to conduct regular tests after activation to ensure normal response and guarantee safe journeys.