···
Log in / Register

What do the letters on license plates in Hubei represent?

4Answers
MacCameron
07/29/2025, 06:31:10 PM

Hubei license plate letters represent: E A for Wuhan, E B for Huangshi, E C for Shiyan, E D for Jingzhou, E E for Yichang, E F for Xiangyang, E G for Ezhou, E H for Jingmen, E J for Huanggang, E K for Xiaogan, E L for Xianning, E M for Xiantao, E N for Qianjiang, E P for Shennongjia, E Q for Enshi. License plates consist of 7 characters: the first character is the abbreviation of the province, the second character is the abbreviation of the prefecture-level city, and characters 3 to 7 are a combination of numbers and letters. Functions of license plates: 1. Numbering and information registration for vehicles; 2. Identifying the region of vehicle registration; 3. Tracing vehicle owners and registration information based on the license plate.

Was this review help?
116
Share
DiJayden
08/15/2025, 07:24:41 PM

I'm quite familiar with how the letters on Hubei license plates represent different cities. For example, 鄂A is definitely Wuhan, 鄂B is Huangshi, 鄂C is assigned to Shiyan, 鄂D is used in Jingzhou, and Yichang gets 鄂E. Moving on to other cities: Xiangyang's plate is 鄂F, Ezhou uses G, Jingmen is H, 鄂J stands for Huanggang, Xiaogan is assigned K, and Xianning is the letter L. Hubei also has three county-level cities directly administered by the province which are quite interesting: Xiantao's plate is 鄂M, Qianjiang is N, and Shennongjia, as a nature reserve, uses 鄂P. Over my years in transportation, I've found that Tianmen is 鄂R, Suizhou is S, and Enshi is 鄂Q. These codes are primarily designed based on the importance of the cities, with the provincial capital at the beginning. Shennongjia, with its stunning scenery but smaller size, comes at the end.

Was this review help?
20
Share
Expand All
SanJulia
10/17/2025, 11:21:50 PM

I know quite a bit about Hubei license plate codes. Everyone probably knows that E-A is for Wuhan, E-B corresponds to Huangshi, Shiyan holds E-C, Jingzhou uses E-D, and Yichang is E-E. Moving down, Xiangyang's license plates are marked with E-F, Ezhou is G, Jingmen is assigned H, E-J belongs to Huanggang, Xiaogan uses E-K, and Xianning is E-L. Additionally, the directly administered county-level cities are special: Xiantao's license plates are E-M, Qianjiang is E-N, the Shennongjia area with its primeval forests uses E-P, Tianmen is E-R, the Enshi Tujia and Miao Autonomous Prefecture is assigned E-Q, and Suizhou is E-S. During my road trips, I noticed that Wuhan has the most vehicles, so it ranks first, while remote areas like Shennongjia, with fewer vehicles, use letters further back in the alphabet.

Was this review help?
2
Share
Expand All
McJulianna
11/30/2025, 11:01:39 PM

I remember the license plate allocation rules in Hubei Province: E A for Wuhan, E B for Huangshi, E C for Shiyan, E D for Jingzhou, E E for Yichang, E F for Xiangyang, E G for Ezhou, E H for Jingmen, E J for Huanggang, E K for Xiaogan, E L for Xianning. The directly administered county-level cities have E M for Xiantao, E N for Qianjiang, E P for Shennongjia, E Q for Enshi, E R for Tianmen, E S for Suizhou. The order of cities is arranged by importance and geographical location.

Was this review help?
11
Share
Expand All
More Q&A

Is the Aviator New Energy a Plug-in Hybrid?

The Aviator New Energy is a plug-in hybrid. Taking the 2020 Aviator as an example, it is a mid-to-large size SUV with body dimensions of: length 5080mm, width 2022mm, height 1759mm, wheelbase of 3025mm, minimum ground clearance of 162mm, and a curb weight of 2270kg. The 2020 Aviator features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 3.0T turbocharged engine delivering a maximum horsepower of 355PS, maximum torque of 553Nm, and maximum power of 261kW, paired with a 10-speed automatic transmission.
103
Share

Where is the engine number of the Geely Binyue located?

Binyue's engine number is located on the lower right side of the engine block. The Binyue comes with two displacement options: 1.0T and 1.5T, and offers two transmission choices: dual-clutch and manual. The engine delivers a maximum power of 130.0kW, a maximum horsepower of 177PS, and a maximum torque of 255.0N·m. Below is more information about the engine model: 1. Front section: Includes the product series code, generation symbol, and regional or manufacturer code, which can be represented by letters chosen by the manufacturer as needed, but must be approved and filed by the industry standard regulatory body. 2. Middle section: Consists of the cylinder count symbol, cylinder arrangement symbol, stroke symbol, and bore symbol. 3. Rear section: Comprises the structural feature symbol and the application feature symbol. 4. Tail section: Distinguishing symbol. When differentiation is needed within the same product series due to improvements or other reasons, the manufacturer may choose appropriate symbols for representation, with the rear and tail sections separated by a "-".
119
Share

What is the size of the Geely Emgrand windshield wipers?

Geely Emgrand windshield wipers size is 22/16. Introduction to windshield wipers: Windshield wipers are blade structures installed in front of the windshield, composed of an electric motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. Replacing wipers with the same specifications: Regularly use approved glass cleaner to clean the windshield, and ensure the windshield is thoroughly cleaned before replacing the wiper blades. Only use wiper blades of the same specifications as the original wipers. If the wipers or windshield are covered or frozen with ice and snow, remove the ice and snow from the wipers and glass before using the wipers to avoid damage. Do not use the wipers when the windshield is dry or has hard objects on the surface, as this may damage the wiper blades and windshield.
114
Share

How to Turn on the Fog Lights on the Geely Boyue?

To turn on the fog lights, pull the fog light gear control lever. Here is a related introduction to fog lights: 1. The fog light switch is located on the light control lever on the left side of the vehicle. Open the car door to see the fog light gear control lever. The prerequisite for turning on the fog lights is to turn on the width lights or headlights. 2. Fog lights generally refer to automotive fog lights. Automotive fog lights are installed on the front and rear of the car and are used to illuminate the road and provide safety warnings during rainy or foggy weather driving. They improve the visibility of the driver and surrounding traffic participants. 3. Rear fog lights are red signal lights installed at the rear of the vehicle, with higher luminous intensity than taillights, to make the vehicle more visible to other road traffic participants behind in environments with low visibility such as fog, rain, or dust. 4. Front fog lights are installed slightly lower than the headlights at the front of the car and are used to illuminate the road during rainy or foggy weather driving. Because visibility is low in foggy conditions, the driver's line of sight is limited. The lights can increase the running distance, especially the strong light penetration of yellow anti-fog lights, which improves the visibility of the driver and surrounding traffic participants, allowing oncoming vehicles and pedestrians to spot each other from a greater distance.
110
Share

What do 'power' and 'charge' mean in Mercedes-Benz?

In Mercedes-Benz vehicles, 'charge' means: charging. 'Power' refers to energy or battery level. Although Mercedes-Benz is not a hybrid vehicle, various electronic devices in the car require electrical energy to operate normally without starting the engine in start-stop mode. Once the electrical energy is insufficient, the start-stop function cannot work. More details are as follows: 1. Meaning: The word 'charge' itself means charging. When it appears on the dashboard of a Mercedes-Benz, it indicates charging the start-stop battery. Engine start-stop means that during temporary stops, such as waiting at traffic lights, the engine needs to pause briefly while the lubricating oil continues to flow. This ensures that restarting does not cause damage to the engine. 2. Reason for charging: When the engine starts, it needs to supply power to the starter motor. The car battery frequently discharges to meet the power demands of the audio system and lighting. When 'charge' appears on the dashboard, the onboard charger is charging the battery, ensuring that even when the engine is not restarted during start-stop, the battery can still meet these power demands. Without this charging, even during a short wait at a traffic light, the car's audio and lighting systems would lose power and become unusable due to lack of energy supply.
118
Share

Should the 911 Use 95 or 98 Octane Gasoline?

According to the official vehicle manual recommendation, the Porsche 911 should use 95 octane gasoline. In addition to checking the suitable gasoline grade in the vehicle manual for the Porsche 911, you can also find it indicated on the fuel tank cap. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of some new technologies nowadays, the gasoline grade cannot be solely determined by the compression ratio. A high compression ratio can also be adjusted to use lower octane gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Porsche 911 occasionally uses the wrong gasoline grade, simply switching back to the correct grade after use will suffice. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value will change the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance in actual feedback; For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane value is much lower, the gasoline's ignition point decreases and it may ignite prematurely during the compression stroke. If combustion occurs before the spark plug ignites during the compression stroke, resistance will arise during the upward stroke. This resistance will make the engine run very unstably. If it's just mild knocking with increased noise, the damage to the engine is not significant. However, if there is noticeable knocking, it indicates that the engine's operating condition is already very severe. The vibration not only affects driving stability but can also cause abnormal wear on the pistons and cylinders, and in severe cases, even cylinder scoring.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.