···
Log in / Register

What do 261 and 145 mean in Subject 1?

3 Answers
StDylan
08/27/25 4:42am
261 and 145 in Subject 1 refer to the speed limits on highways under rainy and foggy weather conditions based on visibility. Here are the details: 1. 261: When visibility is less than 200 meters on the highway, the speed should not exceed 60 km/h, and the distance between vehicles should be no less than 100 meters. 2. 145: When visibility is less than 100 meters on the highway, the speed should not exceed 40 km/h, and the distance between vehicles should be no less than 50 meters. 3. Subject 1 requirements: For first-time applicants of a motor vehicle driver's license or those applying to add a permitted vehicle type, the vehicle management office should issue a driving test permit within one day after passing the Subject 1 exam. The driving test permit is valid for three years, and applicants must complete Subject 2 and Subject 3 exams within this period. If the exams are not completed within the validity period, the passed subject results will be invalidated.
Was this review help?
18
4
Share
SanJason
09/09/25 3:44am
Haha, I remember this question clearly! When I was taking the driver's license test, I often got confused too. Question 261 is about obscuring or damaging the license plate, which directly results in a 9-point deduction! It used to be 12 points, but the new regulations changed it. Question 145 refers to driving 20%-50% over the speed limit on ordinary roads. For example, if the speed limit is 60 km/h and you drive between 72-90 km/h, you'll get a 6-point deduction if caught. There's a trap here—some people think you only get penalized for exceeding the speed limit by 20%, but in fact, any speed exceeding 20% is considered a violation. Pay special attention to the scenario described in the question, as the point deduction standards differ between ordinary roads and highways. On highways, speeding 20%-50% over the limit results in a higher point deduction.
Was this review help?
3
1
Share
Expand All
StLuke
10/23/25 4:33am
I just went over these two questions when teaching my daughter to practice. Question 261 is about deliberately covering the license plate—now if caught, it's an indisputable 9-point deduction. The core of Question 145 is the speeding range on ordinary roads: exceeding the speed limit by 20% but less than 50% results in a 6-point deduction. These two questions are often tested together for comparison, like asking whether covering the license plate deducts 9 points or speeding by 20% on ordinary roads deducts 9 points. Actually, memorizing a rhyme is more convenient: 'On ordinary roads, exceed by 20% but not break 50%'—just remember it's a 6-point deduction. But be careful, questions about trucks or buses overloading are also mixed in this section.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

What is the wading depth of the BYD Han?

The maximum wading depth of the BYD Han is 250mm. The wading depth of the BYD Han is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally speaking, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake of the BYD Han is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause serious damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, be sure to turn off the auto start-stop function to prevent the vehicle from automatically restarting after stalling in the water, which could cause serious damage to the engine due to water ingress. Judge the underwater road conditions based on the passage of the vehicle ahead and choose a suitable entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and reference points such as the wheels and doors of other vehicles to judge the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed recklessly; choose an alternative route instead.
4
0
Share

Are Hyundai engines domestically produced or imported?

Hyundai engines are domestically produced by Beijing Hyundai Mobis Auto Parts Co., Ltd. The engine models used by Hyundai include G4FL, G4LD, etc. The G4FL engine has a maximum horsepower of 115 hp, a maximum power of 84.5 kW, a maximum power speed of 6300 rpm, and a peak torque of 143.9 N·m. The G4LD engine has a maximum horsepower of 140 hp, a maximum power of 103 kW, a maximum power speed of 6000 rpm, and a peak torque of 211 N·m. For daily maintenance of Hyundai engines, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB_CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid faults, change the oil regularly according to usage conditions and keep the oil level moderate; When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area, accelerating engine wear and internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking filters and oil holes, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
4
3
Share

How many seconds does the Triumph 660 take to accelerate from 0 to 100 km/h?

The Triumph 660 takes 14 seconds to accelerate from 0 to 100 km/h. Here is a detailed introduction about it: Introduction 1: The word "Trident" itself means "three-pronged spear," referring to the classic weapon held by the sea god Poseidon. Introduction 2: In the Triumph TRIENT-660 model, the trident not only carries the meaning of "divine weapon" but also subtly refers to the three-cylinder engine it is equipped with. Introduction 3: The single round headlight is one of the classic design elements of retro motorcycles, and the TRIDENT-660 also follows this tradition.
5
4
Share

What is the top speed of the BYD Han?

The top speed of the BYD Han is 200 kilometers per hour. Below is relevant information about the BYD Han: Introduction: The BYD Han is a flagship new energy vehicle launched by BYD Auto in 2020, marking BYD's new energy vehicles moving towards the mid-to-high-end market. Vehicle Design: The BYD Han adopts the family design language of BYD's Dynasty series, inspired by the Chinese dragon, symbolizing not only speed and power but also leadership. The front face features a closed design, presenting a simple and elegant appearance. Unlike previous models, the new design transforms the dragon's mouth into a flat design, lowering the front stance. Combined with horizontal lines, the entire front end achieves a very low and aggressive visual effect.
16
4
Share

What level is the Volkswagen Teramont model?

The Volkswagen Teramont is classified as a mid-to-large size SUV. Its body dimensions are: length 5039mm, width 1989mm, height 1773mm, with a wheelbase of 2980mm. It features a fuel tank capacity of 70 liters and a trunk capacity of 286 liters, with a curb weight of 2005kg. The Teramont employs a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is powered by a 2.0T turbocharged engine delivering maximum horsepower of 186PS (137kW) and peak torque of 320Nm, paired with a 7-speed dual-clutch transmission.
14
3
Share

What clothes are not allowed to wear for the driving test?

There are no specific requirements for clothing during the driving test. Here are the relevant details: 1. Driving Skill Certificate: For first-time applicants of a motor vehicle driver's license or those applying for additional permitted vehicle types, the vehicle management department will issue a driving skill certificate within one day after passing the assessment. 2. Cancellation of test results: If the test is not completed within the validity period, the test results will be canceled. 3. Test scheduling: During the validity period of the driving skill certificate, the number of scheduled tests for subjects two and three must not exceed five times. 4. Failing the test: If the fifth test attempt still results in failure, the test results will be deemed as unsatisfactory.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.